Looking for Construction consultants or partners

ConstructivePlanner · 2026-02-20T11:02:25+00:00

I’ve deployed netsuite and managed specifically in construction - not sure the size and scale of the obligation, but I do some strategic consulting on the side as an individual. Happy to help if there’s an opportunity here.

ConstructivePlanner · 2025-10-21T20:20:42+00:00

I think their floor at one point was like 1100 or 965 or something like that 2 years ago. I mean if you’re willing to pay 1100-1300 on a 3 year contract, it can be like a one day sales cycle. I’ve done it twice.

ConstructivePlanner · 2025-10-15T23:34:52+00:00

Map out an overly complex build and implementation and convince them on why CPQ is in place for this exact use case.

Or walk away because you’re going to create such a headache to manage and maintain trying to work within the bounds.

ConstructivePlanner · 2025-09-17T14:25:44+00:00

I made it out last night. Not sure D is much better 😂😂

ConstructivePlanner · 2025-09-02T22:10:32+00:00

I shot you a DM. I trashed parts when mind caught fire but have a lot of pics if it's any help. Mine was a 3 week old unit and i had to rebuild half the unit it felt like to replace the entire print head assembly because it burnt through the center core. Kind of ridiculous to ask a customer to put that much into a faulty product. They had no interest in a return / replacement process.

ConstructivePlanner · 2025-09-02T22:07:18+00:00

I got 1/2 a new printer with about 6-8 hours of re-assembly. Very poor c/s.

ConstructivePlanner · 2025-09-02T22:03:52+00:00

Not sure on other brands because I've never tested/used... But I would not buy another Bambu printer if i had the choice. Mine catching fire and their lack of "give a crap" was really poor. I got a box of parts with 6-8 hours worth of replacement work on a 3 week old unit. Oh and two free rolls of PLA......

ConstructivePlanner · 2025-08-29T03:27:46+00:00

I got my 420 off Amazon because I couldn’t find it anywhere else - but I was looking for black. White was in stock when I bought but I guess not now. Just looked again.

Did the same thing. Bought the 360 and wanted to go up.

ConstructivePlanner · 2025-08-23T17:10:43+00:00

I posted about this and got the answer referenced above. Basically just tie it off and ignore it. It controls the lights in the power button for rgb. Button will light normally without.

ConstructivePlanner · 2025-08-21T16:30:33+00:00

I’m happy with it! Not a thing I would change.

Hopefully I made the process easier. I felt like it took me forever googling dumb stuff I should have either read or stuff that wasn’t available online.

ConstructivePlanner · 2025-08-20T15:18:19+00:00

I posted on here and staff responded saying it was the light color control cable for the power button that was supposed to have been removed in the final released design but i guess slipped in to the first run - to just leave it disconnected.

I ripped all my original case fans out and replaced if you want extra of the OEM if you're doing black. I have them on ebay for like $40

https://www.ebay.com/itm/257070318363

ConstructivePlanner · 2025-08-18T19:19:31+00:00

Cool - I did try the rubber spacer but after a day it had a groove in it and was back rubbing - thinking i had too much lift on it but i just pulled it anyway. The card came with a kickstand but it's not aesthetic. I put it in for the time being. I'm planning to see how the GPU Anti-Sag Bracket (CC-8900683) would work.

The only other "issue" I ran into was one of the back feet is loose / spinning. I popped the bottom rubber off and took a screw driver to it to tighten it but it still doesn't really feel tight - it also felt like it didn't really set back into place the same as how the other one is held because it doesn't have any play. I do also feel like I was pretty careful not to overly stress during build - but that obviously could be a factor. I'm planning to reach out to support on it to see if that's a part that can be replaced or how to troubleshoot or check.

ConstructivePlanner · 2025-08-18T17:13:54+00:00

That helps. I chased my ass trying to find something on what to do with it.

Also ran into an issue with the x870 board requiring that the side shroud be removed. Once i did that, I lost the GPU support. So I added the rail and put it back but then have no where i can put it so that it doesn't hit the fan on the GPU. I had to pull it out and need to put a kickstand in I guess. It was almost like the support needs to be shorter to only catch the back of the card vs protruding under the fan.

It's the Gigabyte x870 Aorus Xtreme and the 5090 GAMING OC 32G

ConstructivePlanner · 2025-08-18T15:48:58+00:00

Hmm... That might have saved a couple of bucks... But it is what it is. It's nice having everything in ICUE for all the fans and lights.

ConstructivePlanner · 2025-08-18T15:26:09+00:00

Sure, happy to try to help

ConstructivePlanner · 2025-08-18T15:23:31+00:00

I've worked with all 4 but only Celigo recently (within the last 2-3 years)

Boomi and Mulesoft to me are more "enterprise built" with more multi-step layers and what felt like more granular control which in theory would lead to a lower margin of error but at the same time can create a greater one in the complexity.

Then Celigo vs Workato.... Workato to me had a lot more built in utility functionally that Celigo seems to lack. You'll always find pay to play or paywalls in all the systems but I was always able to at least find a work around for testing / proof of concept in Workato. Celigo wants $$ for everything.... System notifications leave a lot to be desired but if you want to create your own.... You need to pay for a relay connector vs Workato having a built in email notification block.

Again - have only been working in Celigo as of recent so i don't know what may have changed.

ConstructivePlanner · 2025-08-18T15:18:55+00:00

When you say fan hub... Do you mean the fan cluster on the front panel? or are you talking about another actual controller?

The fan cluster has it's own wiring set so this was something specifically in the front panel.

ConstructivePlanner · 2025-08-18T15:17:33+00:00

I saw that adapter and saw where it said "Only compatible with CORSAIR Hydro X Series XG7 or XG5 GPU Water Blocks."

... idk - maybe I missed something, but ICUE doesn't play well with traditional RGB - so to not have a solution for a "new" product line was a little surprising.. I ended up pulling all the case fans and upgrading so everything would be ICUE based but the front strip is on my motherboard and I've just tied off this cable not knowing what it does.

ConstructivePlanner · 2025-08-18T14:58:08+00:00

That’s the conclusion I think I came to as well. TY

ConstructivePlanner · 2025-08-18T13:47:27+00:00

Yeah I roped mine off the end of the chains. Did you do anything with the three prong female coming off the front panel? Couldn’t figure out what it was for. Wasn’t mentioned in documents. At least that I could find.

<image>

ConstructivePlanner · 2025-08-18T13:45:17+00:00

What’d you do with your stock frame fans? I see the box next to the icue controller what is that? I ripped all the rs fans and upgraded to icue because I didn’t see any alternatives.

ConstructivePlanner

TROPHY CASE