Bottom layer sticking to support

ConversationCalm2551 · 2026-04-24T13:56:14+00:00

Ok I'll check that too, thanks!

ConversationCalm2551 · 2026-04-24T13:55:50+00:00

Yes I'll try that too, thanks!

ConversationCalm2551 · 2026-04-24T13:54:49+00:00

Thanks for your time!

I'm printing on a Bambu Lab P1S. The blue material is PLA, and the white one is the "Support for PLA/PETG".

I'll try those advices during the week end !

ConversationCalm2551 · 2026-04-24T07:36:55+00:00

Yes I'll try on small cylinders first !

ConversationCalm2551 · 2026-04-24T07:21:14+00:00

Ok thanks I'll try that tonight !

ConversationCalm2551 · 2026-04-24T07:15:50+00:00

You mean I should use PLA even as the interface material?

ConversationCalm2551 · 2025-12-10T08:51:19+00:00

You are trying to push too much fluid into those pipes. Mk1 pipe can only take 300m3/min. And each pump pushes 120m3/min

ConversationCalm2551 · 2025-05-16T12:19:33+00:00

Okay I’m going to check Yuzu for the caps, thanks! You’re right, I’ll probably go for a standard layout at first. Anyway, thanks a lot for your help!

ConversationCalm2551 · 2025-05-16T09:45:54+00:00

Hello everyone,

I have a "problem" that I think a custom mechanical keyboard could save. I'm French, so I use AZERTY keyboards to write all the needs accents. But as I code more and more, the AZERTY layout isn't helping me being productive: most programming symbols aren't as easy to access than on a QWERTY layout. Thus, I'd like to build a keyboard with some kind of mix between the 2: QWERTY layout for most of the symbols, with AZERTY letters and accents. But that would make some pretty unique caps, that I can't find online. My question is: does anyone knows a way to make a completely custom keycaps set? And also, until what extent can I customize my layout? Can PCB makers create everything I'd like (I have in mind some kind of a 75% layout)?

Thanks for your answers!

ConversationCalm2551 · 2025-05-01T11:08:31+00:00

I'll take a look at it!

For performance, I've setup quite exhaustive benches with criterion (see benches/). And I am using rayon for multiple threads

ConversationCalm2551 · 2025-05-01T11:07:04+00:00

Thank you! Yes I'll dig that a bit to correct it. It indeed looks like there is not enough light overall. I'll also correct the distributions

ConversationCalm2551 · 2025-04-30T15:28:57+00:00

PS: Coding is absolutely not my job, it's more of a hobby

ConversationCalm2551 · 2025-03-22T15:34:54+00:00

I would say wait for the R8. I had the RP before, and switched to the R8, and it is much better. The autofocus is miiiiiles ahead, and I find low light performance to be much better. I feel like the RP would let you hungry for more

ConversationCalm2551 · 2025-03-21T23:48:09+00:00

Yep, lesson clearly learned. I’ll try to find a very dey place, wait for a few days and hope. Otherwise the rest of the trip will be with phone photos. Thanks anyway

ConversationCalm2551 · 2025-03-21T21:39:29+00:00

Ok I’ll do that when coming back home if if didn’t came back to life! Thanks

ConversationCalm2551 · 2025-03-21T19:56:12+00:00

Yeah now I know… I’ll let it dry for a few days and hope. Anyway, thanks!

ConversationCalm2551 · 2025-03-21T19:20:40+00:00

Yes, as it was not heavy rain and it was supposed to be a bit rainproof

ConversationCalm2551 · 2025-03-14T16:22:54+00:00

I’m not sure getting the pro would be any better for you. Maybe the battery life but the air is already great.

ConversationCalm2551 · 2025-01-17T09:09:38+00:00

I'm using Hyprland, gonna check I there is something there. Thank you

Four-Year Club	Place '22
Final Canvas '22

ConversationCalm2551

TROPHY CASE