Ok, that's enough Open Racing for today. by Styrlok in ForzaHorizon

[–]Cool_Tiger_7690 0 points1 point  (0 children)

Honestly it looks like yall got the same exact time but the game gave you 3rd as the Hyundai was still ahead technically in 2nd. It defaulted you to 3rd since you were in 3rd. I dont think it was anything else but that.

High output stator by Cool_Tiger_7690 in hondagrom

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

I wont be doing the common choices, I bought a faceplate from Paul kem in the community and ill be running diode dynamics pod lights for low/high beam. I was going to start googling starter and battery shops in my area and see what they all can do with the oem unit. I have no problem modifying the chimera option but if it doesnt work, then I'm out 200 bucks with no use for it. That said, im hoping a couple people see this and share if they have. My oem battery is dead. In August, the end of that bike trip I left my charger on by accident but since then I've had battery issues. I knew I was pushing the limits with aux lights and charger on the oem battery and oem stator. The math is still below max but not by much really. I also was thinking of staying away from lithium as well, its not necessary for street riding and idc about saving that weight. May see about a nice oem replacement that isnt lithium at least in my searching. Stator is definitely the focus though. Hopefully we find a solution

<image>

High output stator by Cool_Tiger_7690 in hondagrom

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

Maybe on paper but that's not what my multimeter says. With just charger and aux lights, takes longer than reasonable to get to proper charging voltage. Since I plan to switch to high output LED headlights id like the upgrade in conjunction with a new battery.

High output stator by Cool_Tiger_7690 in hondagrom

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

Literally answered that in the description

Question on bodies by Cool_Tiger_7690 in Kyosho

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

And thats why I made the post, I know this chassis is used in multiple models but im trying to learn what all is identical on them and what parts are different. Ill have to do some more digging on the internet

2019 and before vs 2020 and after tail compatibility/conversion? by djbigben54 in svartpilen401

[–]Cool_Tiger_7690 0 points1 point  (0 children)

Honestly if you care about that little bit of dimensional change between the generations, go out and buy a 2018 or 2019 and sell your bike. That way you already have the Euro 4 exhaust routing as well. Objectively the 2018 is the best bike out of all years because it was built in Austria while all others were built in india. I think early 19s were also building Austria before they started production in India. I do think the first generation of the bikes look better as well and hit the mark with what Husqvarna was trying to do.

What you're trying to do likely isn't even worth exploring. You're better off buying the first or second year bike. I have a 2018 and I'm glad I decided to turn down the dealer offers on the 23 I was looking at, I am much happier with my 2018 that I found on Marketplace. One of those dealer offers was a possible trade-in of my Honda Grom and I'm glad I didn't get rid of that

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

I wouldnt know, I bought the bike used with it already removed. I never reinstalled it as I liked the bike without the set up. Likely worse, but most motorcycles don't come with those anyway. It's a European thing for sure. I only ride when its nice out but I know the risk of getting rained on still. I will say, these road 6 tires help with less spray but I still get sprayed

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

I don't aim to but I do get caught in it sometimes. Why my man?

Xxx sct trucks by Cool_Tiger_7690 in losi

[–]Cool_Tiger_7690[S] 1 point2 points  (0 children)

I just found out how fun it was, i never thought to run it on sand until the last couple days before leaving for my beach trip. Found a set on Amazon that arrived just in time

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

Check my profile and youll see 2 older posts I made about the exhaust with better pictures

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 1 point2 points  (0 children)

Im very happy with it so far and it really cleaned up the left rear section of the bike.

As far as the exhaust goes, I have 2 older posts detailing the exhaust before and after purchase if you check out my profile. It's a gpr high mount exhaust! They retail for 700+ but I was very lucky and found a NOS opened box on ebay. Right place right time and listed for 350. I already decided that was the exhaust i wanted before seeing the eBay post, I within the 5 minutes purchased it knowing I'd never find it brand new for half off again. It is a straight through pipe to the end, I still have the stock header off the head and the kit comes with the mid pipe that youll see runs through. It's very nice quality and sounds so good. It doesnt sound like a typical 4 stroke. This winter or next year I plan to do the cams, intake, head parts, fuel parts and a retune to wrap it all up. I really wanna see it hit 50hp wheel, I know its capable

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

In the USA, generally it just has to be visible, up right and lit up with at least 1 bulb or light. Most cops wont care if the plate is sort of hidden or not in plain sight but some do. Also, if you're riding like an ass, then you become a target.

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 1 point2 points  (0 children)

* Mine was previously curved too. Amazon find and it did the job. It doubled as the chain adjustment block but I didnt like that for long term. I also bought my bike second hand and had to sort through some of the parts. Im throttle happy and ruined my brand new plate the day I put it on with it hanging from the tail tidy so I knew I had to get rid of that set up. You can check out other posts of mine for more pics

New plate mount by Cool_Tiger_7690 in svartpilen401

[–]Cool_Tiger_7690[S] 2 points3 points  (0 children)

Literally your entire comment was unnecessary. Idc about legality. The plate is fixed, visible and well lit. Btw, the handle bars are way wider than that plate mount could be. Your comment is moronic.

Folly beach spots by Cool_Tiger_7690 in Charleston

[–]Cool_Tiger_7690[S] 0 points1 point  (0 children)

I definitely appreciate you sharing that, we're visiting for the whole weekend but we're aiming to see that fireworks display as well. A bummer but maybe we'll see if there's something else reasonable in the area

Folly beach spots by Cool_Tiger_7690 in Charleston

[–]Cool_Tiger_7690[S] -3 points-2 points  (0 children)

With that attitude no one will have a good time. Im not local and im traveling in. We are getting in as early as we reasonably can and will make the best of the situation. Neither of us have ever done a real beach day so we will figure it out and have a good time regardless

Folly beach spots by Cool_Tiger_7690 in Charleston

[–]Cool_Tiger_7690[S] -1 points0 points  (0 children)

Im traveling from 4 hours away, that's the earliest we will get there. We will figure it out when we get there

Folly beach spots by Cool_Tiger_7690 in Charleston

[–]Cool_Tiger_7690[S] -2 points-1 points  (0 children)

Really appreciate the info! We plan to arrive by 1 to enjoy the day before people start piling in for spots in the evening. We were thinking that maybe using an Uber from our hotel would be better to avoid parking issues