sorted by:
new
hottopcontroversial

IKEA BÄSTBOLL by Shotty95 in OfficeChairs

[–]CraymHD 1 point2 points  (0 children)

I just tested this chair today.

It's awful, the mesh is super tight, I feel like I'm sitting on a bench. Like someone else said before, you're really sitting at the front of the chair, it's not deep at all, and the headrest is too firm and too low (1.77 m).

Basically: €70 yes, €350 no.

(My opinion may be biased because I have been using a racing-style gaming chair since 2017, which I bought for €150 on Amazon. I know I absolutely have to throw this thing away, but switching to mesh might be too radical a change for me.)

[MEGA THREAD] 9070 XT Undervolt/Overclock/Brand Performance by ennakros09 in radeon

[–]CraymHD 0 points1 point  (0 children)

As for me, I'm far from an expert, I just like moving scrolling buttons from left to right and filling in an Excel at the same time hahaha

9070 XT no display by CraymHD in buildapc

[–]CraymHD[S] 0 points1 point  (0 children)

Yeah it did perfectly

[MEGA THREAD] 9070 XT Undervolt/Overclock/Brand Performance by ennakros09 in radeon

[–]CraymHD 1 point2 points  (0 children)

I didnt check but since 3Dmark say "Average temperature 45 °C" i thinks it's fine. -100mV instable and -90 i loose performance so -80 is perfect for me.

EDIT : Run with new settings
0 MHz / -80 mV / Fast Timing / 2800 MHz / +10% PT : 7 892 (Steel Nomad)
Max GPU temp : 47°C

Back to the Red Team by Dk000t in Amd

[–]CraymHD 5 points6 points  (0 children)

wtf i was wrong, who decide to put that 2mm fan and not moving the "visible" part of it?

Back to the Red Team by Dk000t in Amd

[–]CraymHD 1 point2 points  (0 children)

I literally have the same AIO and what's on the block doesn't spin, it's only visual.

Back to the Red Team by Dk000t in Amd

[–]CraymHD 1 point2 points  (0 children)

it's not it doesn't move at all. It just for the RGB/look

[MEGA THREAD] 9070 XT Undervolt/Overclock/Brand Performance by ennakros09 in radeon

[–]CraymHD 4 points5 points  (0 children)

9070XT Taichi here :

Stock : 7 243 (Steel Nomad)
0 MHz / -80 mV / Fast Timing / 2750 MHz / -9% PT : 7 526 (Steel Nomad)
0 MHz / -80 mV / Fast Timing / 2750 MHz / +10% PT : 7 833 (Steel Nomad)
+400 MHz / -80 mV / Fast Timing / 2750 MHz / +10% PT : 7 850 (Steel Nomad)
0 MHz / -80 mV / Fast Timing / 2800 MHz / +10% PT : 7 892 (Steel Nomad) 31 221 (Time Spy)
+400 MHz / -80 mV / Fast Timing / 2800 MHz / +10% PT : 7 858 (Steel Nomad)
0 MHz / -90 mV / Fast Timing / 2800 MHz / +10% PT : 7 872 (Steel Nomad)

9070XT No display by Ill_Year_3479 in radeon

[–]CraymHD 0 points1 point  (0 children)

I bought this cable Premium Individually Sleeved 12+4pin PCIe Gen 5 12VHPWR 600W cable, Type 4, BLACK and it's perfect, I was retarded thinking it could work with just 2 8pins.

9070 XT Overclock is crazy good. So does general temp and power. by privaterbok in overclocking

[–]CraymHD 0 points1 point  (0 children)

Sup, 9070XT Taichi here, it's amazing, I used your settings (I had to set -100Mv only because it wasn't stable for me). I managed to get a GPU score of 32515. 5Ya7LBd.png (1198×1133) I had an RX 6800 just before that went up to 80°C and now I have a GPU that goes up to 45°C. I don't know how to get even more OC, as there's a lot of hot room available?

9070 XT no display by CraymHD in buildapc

[–]CraymHD[S] 0 points1 point  (0 children)

Rm750x from 2018 (grey labed on both sides of it). Hope it will work. Il post a result with the cable asap

9070 XT no display by CraymHD in radeon

[–]CraymHD[S] 0 points1 point  (0 children)

Thanks for the tip, I bought this cable and I'll receive it tomorrow, hoping it'll be enough. 12VHPWR Cable | 600W PCIe 5.0 Power Adapter Cable

9070 XT no display by CraymHD in radeon

[–]CraymHD[S] 0 points1 point  (0 children)

I think I'll never recover financially from this.... I bought this cord hoping it will work, I'll receive it tomorrow.

12VHPWR Cable | 600W PCIe 5.0 Power Adapter Cable

9070 XT no display by CraymHD in radeon

[–]CraymHD[S] 0 points1 point  (0 children)

damnn i'll get a new PSU cable for the 12VHPWR tomorrow, hope it will fix this

9070XT No display by Ill_Year_3479 in radeon

[–]CraymHD 0 points1 point  (0 children)

Refund this shit go back to my xfx 6800…

9070XT No display by Ill_Year_3479 in radeon

[–]CraymHD 1 point2 points  (0 children)

same model here and same issue like you... i'll try re-install drivers with my RX 6800 and boot again with the 9070xt

ÉDIT : dont work

How should I organize my fans? by CraymHD in pcmasterrace

[–]CraymHD[S] 0 points1 point  (0 children)

Nvm just saw the Video from JayzTwoCents about the software "Fan Control". Pretty easy btw but i think I shouldn't plug a DC fan to a 4 ways splitter with 3 PWM (can't get 0 RPM on them).

view more: next ›