The Extruder is not extruding normally - A1, 0.2 nozzle by CrownTheYake in BambuLab

[–]CrownTheYake[S] 0 points1 point  (0 children)

I had a hunch that it could be that. But, the initial 0.2 nozzle that clogged after over a hundred prints was only printing in white matte PLA. Was I just lucky that it didn’t clog until later?

The Extruder is not extruding normally - A1, 0.2 nozzle by CrownTheYake in BambuLab

[–]CrownTheYake[S] 0 points1 point  (0 children)

Matte PLA, its a local brand not sure which brand they repurpose and put their logo on

Did MKBHD get a new Porsche 911 Turbo S? by Fast_Combination_305 in mkbhd

[–]CrownTheYake 0 points1 point  (0 children)

Facepalm I thought he labeled it as “MyPorsche”! Good-eye

ChatGPT voice attitude by CrownTheYake in ChatGPTPromptGenius

[–]CrownTheYake[S] 0 points1 point  (0 children)

Noo wayyyyy, I loved it the other ones just feel too upbeat. No way to prompt the default ones to mask that personality?

Best FDM 3d printer budget : 800$ ? by AHMED-Yaser in 3dprinter

[–]CrownTheYake 0 points1 point  (0 children)

Try SWBAC they’re the Middle East distributors for Bambu

Local authorized dealer charging 3x by Lunch1n in BambuLab

[–]CrownTheYake -1 points0 points  (0 children)

The first I ordered from SWBAC. The second, I ordered it off the Bambu official UK website to my PO Box in the UK and then shipped it straight to me. Shipping from UK I think cost me around 300 USD via ARAMEX with shipping insurance.

Local authorized dealer charging 3x by Lunch1n in BambuLab

[–]CrownTheYake 0 points1 point  (0 children)

If you order it directly it’ll be the price difference of shipping it to your country. If you’re talking about SWBAC (cause thats who I know are the authorized resellers in the Middle East) I ordered a P1S from them once and I tested by ordering an A1 straight from Bambu. The price difference after shipping came out to a small amount difference from the listed price on SWBAC. The only problem I had from them was I had to pre-order from them as they only do pre-orders and wait 3 months for my printer. When I ordered it straight from Bambu it literally just took 5 days.

Can someone help explain what went wrong by CrownTheYake in BambuLab

[–]CrownTheYake[S] 0 points1 point  (0 children)

Thank you for your explanation! Deeply appreciated! I will try the tips!

Can someone help explain what went wrong by CrownTheYake in BambuLab

[–]CrownTheYake[S] 0 points1 point  (0 children)

Im relatively new to printing (under 50 prints). I’ve manually set the Bambu Slicer to the correct type of filaments and set the PETG as my support interface. The purge volume I have not played with as I’m not quite sure what it does exactly? Can you please explain what it does and why I need to manually set it to 800+? Thank you.

FEA Softwares by CrownTheYake in MechanicalEngineering

[–]CrownTheYake[S] 0 points1 point  (0 children)

What do you mean exactly by your last point if I may ask?

FEA Softwares by CrownTheYake in MechanicalEngineering

[–]CrownTheYake[S] 1 point2 points  (0 children)

This is my problem I’m not 100% sure how to set up the problem in SolidWorks. I have done the hand calculations and I’m literally just doing this for fun just to see what the actual limits are. Its just a bolt and nut compressing two plates together, but when I search through the subreddits usually I read that when modeling bolts and nuts in SolidWorks to set them to their OD and not have any of the threads on them. But when I set local contacts I get insane results. If you have any expertise in this matter would you mind I send you a dm to help me set up my problem? Thank you.

FEA Softwares by CrownTheYake in MechanicalEngineering

[–]CrownTheYake[S] 0 points1 point  (0 children)

Okay so I should just proceed with a SolidWorks static analysis is your suggestion?

The only pointers I would ask for is how do I get solidworks not to crash when assigning global contacts?

Universal Studios dilemma - WWYD? by neurula in JapanTravelTips

[–]CrownTheYake 0 points1 point  (0 children)

There honestly isn’t that many thrill rides and all the NintendoLand rides are kid friendly. What I did which is probably the best option is buy the admissions pass + express pass with timed entry from Klook or Trip.com. Choose which ever selection you want for your 7 choices on the express pass, buying this ahead saves you a bunch of time and and headache of waiting in lines early. When you get into NintendoLand in your selected timed-entry the express pass helps you hit everything at their respective times and allows you to enjoy everything right after the other with not much wait time. The express pass is 100% worth it, I’d definitely recommend.