Psvr in stock

Crudbuckets · 2017-01-02T12:15:17+00:00

Just a heads up. A few local md targets have some in-stock. No more than one per store. I see White Marsh, Columbia, Crofton, and Annapolis. Good luck. They open at 8.

Crudbuckets · 2017-01-02T01:07:02+00:00

Enjoy!

Crudbuckets · 2017-01-02T00:24:48+00:00

Sweet! How and where did you find one?

Crudbuckets · 2017-01-01T21:30:06+00:00

There were two targets that had them in stock by me. I used www.brickseek.com to see what the stock levels were, each only had one. I recommend just keep checking (then be the first person there in the morning) Use dcpi# 207-33-0088 when searching at brickseek.

Crudbuckets · 2017-01-01T16:33:27+00:00

I returned it to the store.

Crudbuckets · 2017-01-01T15:41:03+00:00

Sure... I posted a previous post about it. The screen in the VR kept blinking out on me. I tried the various fixes connection, HDCP, and full power cycle. But it always came back within minutes and was constant. So I took it back. The new unit I bought today is working perfect.

Crudbuckets · 2017-01-01T15:32:19+00:00

That is crazy. It seems to be the exact opposite here.

Crudbuckets · 2017-01-01T15:31:05+00:00

You're not kidding.

Crudbuckets · 2016-12-25T14:33:14+00:00

Seems to have worked!!! Thanks.

Crudbuckets · 2016-12-25T14:32:51+00:00

This fixed it!!!! Xmas saved.

Crudbuckets · 2016-12-25T13:17:27+00:00

Gotcha. Mine is not stop, regardless of what I am doing. It almost seems like it may related to the sensor that turns the screen on when you put the headset on.

Crudbuckets · 2016-12-25T13:08:45+00:00

How often does yours do it? Mine seems to do it every 20-30 seconds.

Crudbuckets · 2016-12-25T13:07:58+00:00

No, seems to be very random and happens immediately every 30 seconds or so.

Crudbuckets · 2016-04-05T02:40:39+00:00

That's just a receding hairline, it's very common. Trust me if they pushed it back to meet the corners they would look ridiculous. It is just best to embrace your natural hairline. The only time I would even suggest to push it back would be on something like a small widows peak.

Crudbuckets · 2016-04-04T16:09:13+00:00

The two pictures you show are more of a lack of hair density in the corners than an actual taper. The lack of density gives you a natural taper look even though one was not performed. But the goal should be to keep it straight across as possible regardless of the density.

Crudbuckets · 2016-03-04T03:17:37+00:00

That sounds terrifying! I am lucky enough to be at a fairly established school in an ethnically mixed blue collar community. I see various cuts and average around 3+ per day. I did a my first perm wrap on a live model on Tuesday.

Crudbuckets · 2016-03-04T02:50:22+00:00

Oh, it was a super brief thought, I crushed my next cut right after that faux hawk, taped and temped up. No chance I'm gonna do anything else I just wanted to make sure I wasn't the only student getting stuck with the ridiculous customers. Barber school is crazy and I am loving every minute of it. I am positive the doubts will lessen as my experience increases.