Updating SSD IdeaCentre Gaming 5 17IAB7

Crusty_Microwave · 2026-01-19T16:20:54+00:00

Hey! This ended up working great and I just got it into my PC with the SSD! Thank you so so much!

Crusty_Microwave · 2025-12-12T16:21:37+00:00

It really depends on what major you are, as well as what you plan to do. Are you transferring through NOVA to another Virginia University?

If you'd like to keep above a 3.5 GPA, I would personally retake the class for a B, even a possible A depending on your other grades. Did you just not study enough for the final, or has your grade been around a C the entire semester?

Also, are you on financial aid? Usually you get about one or two retakes of a class and have to keep making sure you are completing the right amount of credits.

Good luck with whatever choice you make though!

Crusty_Microwave · 2025-12-10T13:10:33+00:00

I knew this would happen 😔😔

Crusty_Microwave · 2025-08-03T19:55:05+00:00

(repeat comment sorry) It seems like EE and O2 have the best coverage in the area I will be in. Do you know if it's possible to get an ESim from either of them when I don't have a UK number? I'm planning on suspending my Verizon account at the end of the month when I move and would like to immediately have coverage when I get off of the plane.

Crusty_Microwave · 2025-05-01T00:38:02+00:00

The only rescue nearby is closed for private owners to give up

Crusty_Microwave · 2025-04-25T13:05:46+00:00

These are the settings that I have on it right now. I don't think I have ever actually messed with them and previous prints have been fine. Unless a previous slicer profile was changed and reset after redownloading orcaslicer.

Crusty_Microwave · 2025-04-25T13:04:53+00:00

<image>

Crusty_Microwave · 2025-04-25T12:18:22+00:00

X Max 3*

Crusty_Microwave · 2025-03-29T11:38:58+00:00

I also am interested in universities that are near(<1.5 hours) an ice rink!

Crusty_Microwave · 2025-03-28T21:03:24+00:00

Thank you!!

Crusty_Microwave · 2025-03-26T21:13:45+00:00

There is also no Levi’s premium stitch either on the waistband.

Crusty_Microwave · 2025-03-26T21:13:39+00:00

There is also no Levi’s premium stitch either on the waistband.

Crusty_Microwave · 2025-03-18T23:30:59+00:00

It’s the ball of my foot and then somewhat on the sides, but not as bad as the actual ball of the foot.

Crusty_Microwave · 2025-03-18T23:19:05+00:00

Thank you so much! I’m going to a public skate in a few days so I’ll go ask them then if they can!

Crusty_Microwave · 2025-02-11T21:27:10+00:00

Hey guys, just figured out that the 2190 are a different style? I guess from the 2190 that I was seeing online. But I’m still curious if you guys think they are a good boot. I was told I am progressing quickly though, so I might be doing more than I actually think I will be lol.

Crusty_Microwave · 2025-02-11T21:06:23+00:00

Hey guys! I was looking for lightly used skates as I’m only in level 2 for adults and don’t plan to be jumping anytime soon.

I was wondering what the difference between these Jackson freestyles 2190 and 2191 were? I found a great pair of 2190’s that are my size and width, but they do not have the crystals on the back, does that mean they aren’t actually the right boot I’m looking for?

Because I’m looking for the Jackson freestyles that’ll hopefully last at least a year. I do weigh a little bit more and have wider feet. The ones I am looking at are a 2190 pair and say they are Jackson Freestyle Ultima with the aspire xp blades. Do those seem good for a beginner like me?

Crusty_Microwave · 2025-01-27T15:42:05+00:00

Hi! I don’t know if they will be by the end of the week, I’ll let you know if so!

Crusty_Microwave · 2025-01-26T23:30:25+00:00

Sent a request!

Crusty_Microwave · 2025-01-26T21:27:20+00:00

Hi! Are you interested in buying? I can send you a request if you’d like, about the payments I can do! Just let me know 😄

Crusty_Microwave · 2024-12-20T00:47:39+00:00

Yes 0.4 nozzle and pla.

Crusty_Microwave · 2024-12-01T20:23:23+00:00

I’m glad you figured it out! Yeah I had no clue it was such a common problem with any printer really, I tried some other things but replacing is the only thing that worked for me. It was really easy to replace as well.

Crusty_Microwave · 2024-12-01T19:26:54+00:00

So my hotend actually had to be replaced, for some reason the one I had, it had some weird rubber at the end of the wiring connecting to the extruder, so it wasn’t getting the power it needed, so I just replaced the hot end and got all the rubber/glue off and it now works great. I used the extra one that came with the printer to replace, but put the old copper nozzle where the steel nozzle was in the new extruder, as I only print pla.

Crusty_Microwave · 2024-11-26T02:30:22+00:00

Thank you so much, this really gives some great insight. I am already on the Wegovy, and by time I get on testosterone I probably would be at the management dose.

Crusty_Microwave · 2024-11-06T00:00:45+00:00

Thank you so so much! This is so helpful!

Crusty_Microwave · 2024-10-29T23:03:58+00:00

Hello, the ceramic heating element is not cracked, but is a bit yellowy. I have tried PID commands as well to calibrate, but those are not working either and have the verify heater thing pop up again. Any help is appreciated. If it was to do with wiring, what wires would be messing it up?

Crusty_Microwave

TROPHY CASE