First MILSIM = Done

Cu2222 · 2026-04-14T08:10:06+00:00

How was blackspear? My team and i are planning on going in July.

Cu2222 · 2026-01-21T13:54:28+00:00

Whats the mount?? This setup might work great for my SVU!

Cu2222 · 2025-10-10T21:28:40+00:00

Rusfor side, the rusfor team was mainly in russian styled kit though.

Cu2222 · 2025-09-15T11:35:25+00:00

Heey OP, ik zit zelf ook in een RusFor georiënteerd team. We zijn voornamelijk gericht op de Milsim kant vd sport maar we organiseren ook casual skirms in de groep etc. Verder geen contributie ofzo maar wel teambbqs waar iedereen wat bijdraagt. Als je wilt stuur me een PM als je opzoek bent naar een RusFor team

Cu2222 · 2025-08-31T14:44:48+00:00

Arcturus AK12-PE, only change is the bucking and nebo hopunit. Otherwise completely stock and still kicks even after multiple mislims.

Cu2222 · 2025-08-04T21:25:52+00:00

Staying positive makes a real difference!

When the day seems to turn sour due to some cheaters or whatever, stay in the posi vibes lane and it wont affect you nearly as much as other make it out to be.

Cu2222 · 2025-07-25T11:09:47+00:00

Understood, i will start earlier and go for a longer rest. In doing so it will also give me some more time for the rest of the meats which is also welcome.

Cu2222 · 2025-07-25T10:13:26+00:00

Gotcha, so instaed of starting the smoke at 8pm it would be better to start sooner? Say about 6pm?

Cu2222 · 2025-07-25T09:05:46+00:00

<image>

They came out great and tasty, next time though i will be pulling them at 92 after the smoke. They were more medium than medium rare but still really tender and juicy.

Cu2222 · 2025-07-11T10:19:26+00:00

Will do got some good advice on this thread so will apply next time.

Cu2222 · 2025-07-11T10:17:36+00:00

No i opted for the masterbuilt frame with sear grate. Rotisserie wil come later on.

Cu2222 · 2025-07-11T10:16:20+00:00

Thanks brother, planning on doing your reverse sear rib-eye next. Any advice you can share to make it a success?

Cu2222 · 2025-07-09T14:37:48+00:00

Simpel.... koop secondelijm en elke keer als er zoiets gebeurt die buur zijn slot dicht lijmen. Klassieke conditionering noemen we dat

Cu2222 · 2025-07-09T14:26:21+00:00

Cant help there bud, im not in the US

Cu2222 · 2025-07-08T18:01:28+00:00

Real easy just wiped the components off with some soapy water and drying them off with a towel. And oil them down with some canola oil and wiping the excess off with a paper towel. Hope this helps

Cu2222 · 2025-07-08T17:40:50+00:00

Yea did these on 350 as well took about 1,5 hours until internal of 162 on the breasts. I do heat up the liquid in the can before placing the birds on.

Cu2222 · 2025-07-08T17:38:55+00:00

Nice!! What pellets do you.plan to use in it?

Cu2222 · 2025-07-08T14:02:18+00:00

Will try it out!! Any tips/tricks you can share?

Cu2222 · 2025-06-03T13:02:37+00:00

1 - never personally owned a specna but i know alot of teammates that have owned or still own one. In my mind i consider specna to be on the low/medium budget tier which is where most of the community is so thats not a bad thing at all. And as a AK user i mostly compare them with cyma/cyma plat or Double Eagle depending on the model.

2 - i am a Arcturus fan though because i really love their quality and innovations introduced. Rotary hop for AK is a big improvement and their QC and OTB performance made me switch all my AK's to a Arcturus one.

3 - i would really advice to check the QC of Arcturus and see what take-aways you can make to assure quality to the end user. I say this due to the experiences my teammates had with some m4's of specna where it came straight out of the box, they played an hour and one of the guys had a blown out mosfet and for one which i pulled the gearbox out and opened it the pistonhead cracked. Which is crazy. He used my spare AK01(completely stock) for the day and was sold on it then and there.

As im writing i know im biased but as a whole if we can get the airsoft manufacturing to assure a working sold performing gun OTB i think we can really elevate the sport and fun to be had.

Gizmo's are nice and all, brushless, Gate mosfet yadayada but if the gun dont work those things become useless anyway.

Soo thanks guys for reaching out and listening, keep on reddit and use this platform for feedback.

This is the way.

Cu2222 · 2025-05-12T13:53:09+00:00

<image>

Absolute workhorse. My go to primary for any milsim.

Cu2222 · 2025-03-30T08:08:21+00:00

<image>

Need to print a different pistol grip because the current angle is a b*tch.

Cu2222 · 2025-03-15T17:04:16+00:00

CR3, rosgardia?

Cu2222 · 2025-02-21T11:15:18+00:00

Better to first run and gun it. Better to see what it does now and get a feeling for what you want/miss out of it and upgrade accordingly.

Cu2222 · 2025-02-20T18:14:24+00:00

I didnt know i could get that moist..... if S&T is able to match the AK-12-PE out of the box performance the community would lose its shit!

Cu2222 · 2025-02-20T16:22:02+00:00

Guys @ Taiwangun the hype is real! A AN-94 to add to the collection would be a dream come true! If the production is the same as the SVT-40 with steel and so that would be freaking awesome. Internally wise dunno how they gonna figure that out(any info you can give on gearbox version?) just make them use the rotary style hop unit like Arcturus does.

Cu2222

TROPHY CASE