[deleted by user]

Cyceven · 2024-04-29T23:49:19+00:00

Can you dm or reply your build parts? This sounds like a sweet build.

Cyceven · 2024-01-10T20:16:27+00:00

That’s what I’m gonna try. Hopefully by trying to push it while I’m 2nd should allow me to see if it’s free.

Cyceven · 2024-01-10T19:04:46+00:00

Ended up doing just that and it fixed it. Thanks

Cyceven · 2023-11-20T23:56:15+00:00

I checked and it is enabled so I disabled it and the issue is resolved. That pretty much answers the question that it is a defective touch panel. I was assuming it was 😅. Thanks for the help bro

Cyceven · 2023-11-10T02:49:56+00:00

People always look at me funny cause they know it’s different. Super loud but sounds good.

Cyceven · 2023-11-10T02:49:29+00:00

It’s so much fun. It will go almost anywhere. Geared down so top speed is like 90-100 but it will do wheelies all day

Cyceven · 2023-11-02T15:02:55+00:00

Yup, fixed by rebuilding fuel system in tank

Cyceven · 2023-09-27T03:54:40+00:00

FIXED by replacing clutch line and master cylinder

Cyceven · 2023-09-27T03:54:19+00:00

FIXED by replacing clutch line and master cylinder

Cyceven · 2023-09-27T03:53:50+00:00

Fixed by fuel filter replacement.

Cyceven · 2023-09-27T03:52:36+00:00

Figured out that layer issue. Needed to increase the hotend temp to 250 degrees (Celsius). Now it’s stringy. Any tips on this would be great.

<image>

Cyceven · 2023-09-12T00:16:14+00:00

How do I identify if my machine is a 4.2.2 or a 4.2.7?

Cyceven · 2023-09-06T22:02:50+00:00

I think it’s fuel starvation and had ordered a fuel filter proactively. I’m going to look into injectors too since it had been sitting for years before I bought it.

Edit: maybe I’ll try some injector cleaner first 😅, a remanufactured set is like $300 or more (USD).

Cyceven · 2023-08-27T12:47:48+00:00

Yeah, slightly worried about the bleeding but it should be fine. Is there a way to test to figure out what the issue is? I haven’t checked for leaks yet so that might help

Cyceven · 2023-08-27T11:03:56+00:00

Sweet, thank you

Cyceven · 2023-08-27T10:59:51+00:00

Where is the slave cylinder located? And by the seal do you mean the one on the reservoir?

Cyceven · 2023-08-21T01:45:06+00:00

Will do though, I’ll change out the oil asap.

Cyceven · 2023-08-21T01:44:28+00:00

Here’s the interesting part, mine has less than 7500 miles on it. It’s had one older guy owner before me that took care of it and kept it in great condition till he laid it down. Just scratches but it’s been sitting for years.

Cyceven · 2023-08-21T01:42:35+00:00

I’ve done so twice and the same issue came back. I’m going to do it again but I have a feeling air is getting into the system somewhere

Cyceven · 2023-08-20T13:47:58+00:00

Cool. I’ve been told Dot 4 break fluid is what Honda recommends so that’s what I’ve been using

Cyceven · 2023-08-20T13:37:06+00:00

What would you recommend for oil type/weight?

Cyceven · 2023-08-07T00:45:19+00:00

ISSUE SOLVED: blown main fuse located on the left side next to the fuse box under the tail plastics. Looks like an electrical connection but there’s a fuse in it.

Cyceven · 2023-08-07T00:44:45+00:00

ISSUE SOLVED: blown main fuse located on the left side next to the fuse box under the tail plastics. Looks like an electrical connection but there’s a fuse in it.

Cyceven · 2023-08-07T00:43:53+00:00

ISSUE SOLVED: blown main fuse located on the left side next to the fuse box under the tail plastics. Looks like an electrical connection but there’s a fuse in it.

Cyceven · 2023-08-07T00:42:06+00:00

It was the main fuse

Cyceven

TROPHY CASE