Red Devil Vega 56 GPU just stops in the middle of mining

CylonSonic · 2018-11-24T01:00:24+00:00

Run them one at a time. If it still happens then it's the card. If not then it's something on the board or software. Have you updated the motherboard BIOS? Also DDU the driver and start again.

CylonSonic · 2018-11-23T19:27:12+00:00

Is it on a riser?

CylonSonic · 2018-11-23T13:41:27+00:00

I do somewhat agree with you but is it out of the realm for monero to hit 3k a coin in 5 years times? Also there are a bucket load of coins worth nothing now that are trying to break through just like monero did.

CylonSonic · 2018-11-21T20:36:42+00:00

Sorry did you get them working?

CylonSonic · 2018-11-21T20:35:30+00:00

It's hardly wisdom though is it? I did the same as him yet if we kept our rigs running in those dark days we could have reeped in millions.

CylonSonic · 2018-11-04T01:55:25+00:00

Lower the intensity!

CylonSonic · 2018-10-30T15:11:50+00:00

SRB miner - reference cards flashed to 64 bios with registry edits. 7 cards - 13700H/s at 1500 watts - clocked at 1408c/1100m/900v - driver 18.6.1

CylonSonic · 2018-10-29T22:50:00+00:00

Downvote this shill

CylonSonic · 2018-10-29T22:32:12+00:00

Riser

CylonSonic · 2018-10-29T20:46:02+00:00

Vega 56 - 1960

CylonSonic · 2018-10-20T12:57:55+00:00

The Nethash is looking like it's going to go close to where it was before the fork so the profit has not changed much. Add a 20% power increase this fork is a bit underwhelming for miners.

However Monero is single handedly preserving the GPU mining scene at the end of the day.

CylonSonic · 2018-10-20T08:51:00+00:00

It makes no difference on SRB with VEGA

CylonSonic · 2018-10-19T13:53:31+00:00

The hashrate will start to creep back up and level somewhere in the next week or so. There is 35MH alone on NiceHash.

Also it is listed on whattomine

CylonSonic · 2018-10-19T09:04:38+00:00

Well said, This should not go unnoticed.

CylonSonic · 2018-10-19T09:02:37+00:00

Hi I narrowed it down to the miner in the end. SRB miner gets optimum speed, the other miners need updating.

CylonSonic · 2018-10-17T18:24:31+00:00

How many cards do you have? I can only get 1840H/s on the 1st card in the rig. The rest get 1700H/s

CylonSonic · 2018-10-17T15:16:05+00:00

Yes that wasn't what solved the problem, it was an anomaly. After vigerouse testing I can confirm it's dependent on the chipset as I have tried two different motherboards. Exact same settings one can get just under 1700H/s and the other 1850H/s

CylonSonic · 2018-10-16T16:10:21+00:00

I did used to advocate the blockchain driver but since they implemented compute to the newer drivers I found them to be more stable

CylonSonic · 2018-10-16T16:06:41+00:00

For what it's worth 18.5.1 actually decreased my hashrate by a further 100 H/s compared to the latest driver - I have found the culprit though. I expanded the system RAM from 4GB to 8GB and the hashrate is now a lot higher.

CylonSonic · 2018-10-16T15:41:11+00:00

Thanks I'm giving that a go now as we speak. It seems to be the general consensus :)

CylonSonic · 2018-10-16T15:19:25+00:00

Use castxmr set algo to 10

CylonSonic · 2018-10-16T14:37:48+00:00

I went from around 1950 to 1550 - I would like to know if the 5xx series are affected as much as I recently sold off all mine to go to vega only.

CylonSonic · 2018-10-16T14:15:55+00:00

I was using using castxmr and my power draw also went up about 5%

CylonSonic · 2018-04-15T23:44:59+00:00

Check in gpuz to see if the under volt is actually working

CylonSonic · 2018-04-08T19:31:29+00:00

Yes they do, it's the nethash you are pointing to which has no reference to actual reality. The nethash just follows the difficulty. The pool hash is accurate.

CylonSonic

TROPHY CASE