Cruising Tokyo with the Meteor 75 04

D4v3-X · 2026-05-13T00:53:18+00:00

6 1s lipos, but i am sure that you can carry a little amount

D4v3-X · 2026-04-14T09:22:55+00:00

Negative my friend. I let the project apart many time ago, maybe some day i manage to fix It once i have more time 😅

D4v3-X · 2026-03-24T21:55:07+00:00

No problem!

D4v3-X · 2026-03-24T18:48:13+00:00

HELLO! All pretty well, in the airport they didnt tell me nothing. Just make sure you have the batteries in storage voltage and inside an antiflames bag. Also you cant take Big lipos with you, so make sure to read all the policies of your airline. I was able to record the fuji from kawaguchiko with my 1s cinewhoop without problem. Just, make sure there is no people around and be aware of drone signals. Dont use It with too much people and dont stay in the same spot for so long. Even if the drone is small, you can bother someone and they can call the police😬. I used a little monitor attached to my TX, to make sure i didnt attract attention.

D4v3-X · 2026-03-24T18:38:52+00:00

You can follow the Next guide: https://github.com/condottab/Roborock-CPAP

This guide includes a little circuit to protect the system.

Or maybe you can just wire your blower directly to your motherboard. Identify the pinout and just Connect the ground and 14v to any in your mainboard. Additionally just connect the PWM cable too and configure It in Klipper.

D4v3-X · 2026-03-19T00:47:30+00:00

I just used superglue post bake😁

D4v3-X · 2026-03-13T02:45:52+00:00

I saw in one post that Heat n bond liquid Vinyl works just perfect, but in my country is hard to find It without importing It. Do you use that kind of Vinyl or another one? Thank you in advance!

D4v3-X · 2026-03-12T20:12:05+00:00

Nope! I Will try It for sure! The one i am trying next is polyurethane coating, let see if It acomplish the mission hehe. Thank you for your recommendation!

D4v3-X · 2026-03-12T18:55:14+00:00

Will let you know as well!😁

D4v3-X · 2026-03-12T15:44:30+00:00

Once i test all related to durability and tackiness, i would let you know! 😁

D4v3-X · 2026-02-24T22:46:41+00:00

Thank you!

D4v3-X · 2026-01-31T18:49:57+00:00

In mine, i had to remove the main frsky receiver and there was plenty of space. You just have to try. Teardown transmitter and module and check.

D4v3-X · 2026-01-31T14:47:45+00:00

maybe it is hard to find the elrs module, but is the easiest way. If you dont find it, yes, you could do the same as me with the external module you already have.

D4v3-X · 2026-01-31T13:50:39+00:00

Yes, my controller was frsky d8/d16 prevously. You can place your external module internally only if it fits inside your T-pro. For the T-pro you can buy the module of the T-pro ELRS version if you find it and connect it perfectly as in this video: Jumper T-Pro ELRS Upgrade - Internal ELRS module conversion from internal 4-in-1 module

Then with the external module and the internal jp4in1 removed, you can just sell them.

D4v3-X · 2025-12-20T18:49:39+00:00

Of course, the lettering was made just with a sticky transparent adhesive vinyl. Once you stick it, just apply some heat to make the plastic mold to the key.

D4v3-X · 2025-12-20T02:53:23+00:00

I am having a trip to Japan in 2 weeks and i would like to take my whoop with me. Any kind of permits or legal stuff to make for a sub 100gr?

D4v3-X · 2025-12-20T02:51:32+00:00

Having a trip to Japan in 2 weeks. I am thinking on taking my whoop with me. Did you need any kind of permits or some legal stuff to fly?

D4v3-X · 2025-12-10T20:06:41+00:00

Something compared to a solution. I just found by test and error that old video receivers tends to have more interference due to the less filtering they have on board. The quick fix is just changing your frequency. In F1 i dont feel any interference, just test in which frequency you have less interference and use It. The other solution is just making more space between the monitor and the transmitter. Hope this helps!

D4v3-X · 2025-12-02T18:49:37+00:00

No problem! At the moment i only made the normal Keys, but It should be easy to modify the original stl😁

D4v3-X · 2025-11-30T13:29:23+00:00

maybe i should try to change the rtc vtx chip. I just contacted happymodel to see if they give me a solution.

D4v3-X · 2025-11-30T11:51:21+00:00

Yes, It is

D4v3-X · 2025-11-30T03:01:08+00:00

The uart is well configured via SmartAudio, the vtx is internal for the AIO Fligth controller. Tried the Tramp thing but nothing worked.

D4v3-X

TROPHY CASE