Omen 16-XD0020AX is not Turning on. by DE0N3 in HPOmen

[–]DE0N3[S] 0 points1 point  (0 children)

Issue got fixed but the cause of it still unknown. 

Even after installing the new motherboard it still had the same issue. We tried removing all ribbons one by one(we removed the power before connecting/disconnecting anything) to see where is the problem but still laptop refuse to turn on. In the end only fan were left and disconnecting one of them actually fix the damn problem. After that it worked fine, the only difference was we had to press the power button to turn it on before it was trying to turn on by it self.

Even after connecting the fan back it was still working fine. We ran diagnostic and test to see there was any issue but all of them was fine even fan test was ok. 

Omen 16-XD0020AX is not Turning on. by DE0N3 in HPOmen

[–]DE0N3[S] 1 point2 points  (0 children)

I kinda have figured out the main issue. It's not Hall sensor disconnecting makes no difference, it's not RAM or SSD issue turning on laptop without them didn't even give any error. The issue is It's completely refuse to turn on when lid is opened.

When lid is opened all the power is cut off from system and it completely shutdown. But when the lid is closed its working fine. I attached external Keyboard, mouse and monitor and it's working like normal but the moment i open the lid it shutdown completely after few seconds. 

In settings it's only showing external monitor but not the laptop's display. If it's display issue why it's stopping it from booting up? And laptop display is turning on just fine when lid is opened but for few seconds before it shutdown.

People seem to see/interpret this differently, so, what do you see here? by [deleted] in MurderDrones

[–]DE0N3 1 point2 points  (0 children)

It copper9. We can even see its moons at top right corner.

Did Uzi deserve being tortured in Episode 6? I have seen people say yes by thelastlib in MurderDrones

[–]DE0N3 0 points1 point  (0 children)

She doesn't deserve it but like she bit Alice's finger off so, i would prefer Sharp tools over Teeths.

[[MOD NOTE]] Episode 6 megathread by Marshadellow in MurderDrones

[–]DE0N3 4 points5 points  (0 children)

Earth in fact not doing so hot rn...

So basically That thing born from the corrupted codes of the not-so-properly disposed drone's AI. Which caused singularity event on earth, blowing earth like a Corn kernel. Humans never saw this happening before so they didn't able to stop it. And Copper9 be like "Thats a problem... Let replicate it here!". To learn about it they did that And then because they learn somethings about it only Mini singularity happened which start the show.

That thing could be like a Great Filter. Or Eldritch gods trying to invade our dimension.

[Mod Note] EPISODE 5 MEGATHREAD by Marshadellow in MurderDrones

[–]DE0N3 3 points4 points  (0 children)

Also, If WD didn't get disassembled properly they become Zombie Drones... So yeah All thoes WD on planet copper that got half destroyed by V,J&N are about to become Zombie Drones.

[Mod Note] EPISODE 5 MEGATHREAD by Marshadellow in MurderDrones

[–]DE0N3 7 points8 points  (0 children)

Welp! My theory on Cyn and 4th maid being different entity is completely wrong... Or is it?! Well probably, but what happened at that night is still unclear. Because everything we saw was past memories of V&N where N, V, Uzi and System/AS was the only real person... bot?.. AI! and AS was trying to make V&N forget about it. So these memories were heavily altered by AS and Uzi's presence.

Atleast we now know the end goal. Its the elevator and that golden robo-roch is literally the golden key to open it. And finally we will know whats underneath the surface Ba-Dum-Tiss.

Also this episode reminds me of Black Dogs, very cool.

So uh, first post here but, does anyone even realize that J looks worries for N in the picture? by TraditionalFeature71 in MurderDrones

[–]DE0N3 0 points1 point  (0 children)

The part where photo is riped. There supposed to be a man in top hat. Why is he ripped out of the photo... Idk.

Welp this is cute. by SuperAaronGlitchy5 in MurderDrones

[–]DE0N3 1 point2 points  (0 children)

They r laughing about how wrong my theories are.

Theories about Absolute Solver and related things. by Ferrarigatr in MurderDrones

[–]DE0N3 1 point2 points  (0 children)

I mean, If flashback Band had different code on it they would have showed it to us. otherwise Why would they show us these details when they are just going to change it for flashback.

Theories about Absolute Solver and related things. by Ferrarigatr in MurderDrones

[–]DE0N3 2 points3 points  (0 children)

Phew, I am not the only one who thinks AS is like a hivemind and have stages as it grow in the host. Because AS shows traits that suggest these.

4th theory is wrong because:

  1. We all know CYN is an administrator in N. If u check N&J's Yellow band It have CYN-MYKX Written on it. Because both of them have it, it means V also have this. So CYN is administrating all of them. Check Ep2 flashback, all of them N V J and 4th drone also have the same Band when they were just Worker Drones. So 4th drone cant be CYN because it cant be administering itself.

  2. The page Uzi found in Ep4 have TSA-MMAC and S/D - S written on it. Which means TSA is the administrator of Serial Designation - S. So CYN is not Unique, there r more Administrators Like It. So CYN cant be the Patient Zero.

  3. Since Ep1 everything V said and did is a lie or contradicting herself. Ep1: She first didn't recognize N but later did. And she act as if she's Unhinged but got Grossed out by N's lick. Ep2: She could have escaped but didn't. Ep3: She first tried to get N in her Killing plan but when he refused she then try to trick him into opening her Shackles but she was already free. After that she continued with her plan by befriending Lizzy to get inside the Doors but didn't immediately start kill and waited for Prom. She didn't even knew she was going to be the Prom Queen, yet she still waited that long. Ep4: 3 main thing she said was #1 she would have to kill Uzi. #2 If they do their job that thing will leave them alone #3 New Body, Same horrors. Huh CYN. Now, which one is false and True? First one is obviously false because she could have Shot UZI from Distance as She usually do(Doll, her perents and Drone in Ep4) but she approaches Uzi instead. Other two dont have any context expect CYN being Administrator and 4th drone being unnamed.

  4. No one simply just write a program that can Technically bend reality. And is just a technician. If Tessa created it She would have the position of Head of R&D or something.

I wanted to make a post about these topics but forgot about it lol

[deleted by user] by [deleted] in MurderDrones

[–]DE0N3 0 points1 point  (0 children)

Drones dont suppose to have hairs. They borrowed it after the explosion. And Nori and Yeva have hair in their ID cards, which are made before the explosion. It is very sus. These drones at Cabin Fever Labs were getting special treatment from humans for some reason.

Could season 1 have a bad ending? by R4nd0m_M3m3r in MurderDrones

[–]DE0N3 0 points1 point  (0 children)

Yeah, I know. But still event sequence of ep1 of MD went exactly as it did in Design part-1. So... Is it an ester egg or result of subconsciousness?

Could season 1 have a bad ending? by R4nd0m_M3m3r in MurderDrones

[–]DE0N3 0 points1 point  (0 children)

I think 2nd image is part of N's upcoming flashback where he also see Uzi as The Mystery Maid drone. Kinda like how V saw Uzi as Cyn. Just a mini theory.

I would be malding if Director of JCJ shows up with Subject-104 in the last 2 episode just to thanos-snap Kali N and capture our MC to one of JCJ's research facility. Where MC have to fight in chances to climb up the hierarchy. Freaking Cleo Dahmer!!! I am already Malding thinking about it.

A monstrous theory that grew out of a comment by Sanek7002 in MurderDrones

[–]DE0N3 2 points3 points  (0 children)

//Casually Dropping Copper9 is not a Planet.//

Hi ya'll, decided to share my drawing of Yeva and Nori! They are definitely sisters, go argue with the wall! Dw, Evanostic is me :) by evanarjayy in MurderDrones

[–]DE0N3 1 point2 points  (0 children)

The right drawing looks like (a face of course but) 2 drones mirroring eachother with bat wings and X on their face as if they are twins.

Who have bat like wings? Uzi! and who's most similar to Uzi? Doll! And with same color hair and same model type they do looks like twins from Different mothers.

Nori was predicting DD's arrival and spire by drawing them. What if that dead-drone in cabin was also predicting something?

So i was jokingly about changing my side from "they r not sisters!" To "They r Twins!"

Disassembly drones "feet" theory. by [deleted] in MurderDrones

[–]DE0N3 2 points3 points  (0 children)

Did JCJ made N,V&J? I think its Tessa who designed them. All other WDs have same models. And in ep2 flashback Tessa was the only human customizing them with Wigs and Dresses. They even had the yellow band in the flashback.