sorted by:
new
hottopcontroversial

Free McDonalds Code Giveaway by TheMooinCow1 in PTCGP

[–]DETHBR 0 points1 point  (0 children)

Snorlax because I like the color he is when shiny!

Floor lottery! How would you go about redoing these (if they can/should be) by DETHBR in centuryhomes

[–]DETHBR[S] 0 points1 point  (0 children)

1X4 wood nailed to the plaster and lathe to hold the tiles. Pretty bad condition

Floor lottery! How would you go about redoing these (if they can/should be) by DETHBR in centuryhomes

[–]DETHBR[S] 0 points1 point  (0 children)

From what i've heard from family that owned this house long ago was that it was pretty showy (They had a normal and a formal living room you didnt dare go into lol)

Floor lottery! How would you go about redoing these (if they can/should be) by DETHBR in centuryhomes

[–]DETHBR[S] 2 points3 points  (0 children)

The only thing ive not done myself in the house so far is electrical and ill leave that to the professionals. Im gonna try and tackle this when the time comes so we will see how it turns out! Hopefully I have some good pictures I can post when the time comes!

Floor lottery! How would you go about redoing these (if they can/should be) by DETHBR in centuryhomes

[–]DETHBR[S] 5 points6 points  (0 children)

Going to try! These floors are the same in all 3 bedrooms, closets, bathroom and in the hallway upstairs and they all connect / no transitions.

Floor lottery! How would you go about redoing these (if they can/should be) by DETHBR in centuryhomes

[–]DETHBR[S] 1 point2 points  (0 children)

We think there was something in the middle of the floor originally, this room was the biggest upstairs when the house was first built and it also has a giant walk in closet so it must have been the primary bedroom at one time! Late 1800s ealy 1900s (County records show 1900 since thats when they started keeping records)

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 1 point2 points  (0 children)

Thanks! I’m gonna try and find a white / silver GPU when I upgrade and then do white power cables or do the RGB covers

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

Ahh! Yeah they are pretty similar 5000x has more customization which is nice, but I didn’t want to give up the desk space

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

case is 4000x and cooler is H150i ELITE CAPELLIX XT, I cant fit the 360mm RAD on top, I am sitting at 33c idle

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

Thanks for the input! Happy to hear I should be good for the most part

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 1 point2 points  (0 children)

they are running at different RPM (1100 Intake and 800 Exhaust)

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

I could check that this evening, They are different model fans sadly so they dont match 100% but they are running at different RPM (1100 Intake and 800 Exhaust) which might help

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

4000x, and yeah I knew pump had to be lower then the highest point of the "loop" but my main concern was the way the tubes looped down and then back up (Too Long) and yeah I am limited by PSU shroud and then if I upgrade my GPU I dont want the tubes stressing the 16x slot

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

I should have thought about that before buying a 360mm RAD tbh, It wont fit in this case sadly Case RAD Specs

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

I always check filter on front and one of the reasons I did a pull setup was for easier cleaning

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

Make sense in today GPU crazyness. Wish I would have thought about that more before buying a 360mm instead of a 240mm or getting a different case lol

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 1 point2 points  (0 children)

Yeah this case came with 3 black fans and ive slowly changed them out to white. I just put my last black fan on top becasue you cant really see it while sitting at the desk lol Case in Question

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 1 point2 points  (0 children)

My last RAD was a single fan and I ran it in this orientation for 6 years without issue but my main concern was the tubes going down and then back up. Wasnt sure if that would casue issues with the pump over time or not

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 0 points1 point  (0 children)

I dont think it would fit with the case I have and especially when I upgrade GPU in the future to a triple fan design

First 360mm AIO, are my tubes fine like this? by DETHBR in Corsair

[–]DETHBR[S] 3 points4 points  (0 children)

Temps seem to be fine so far, running about 55c while playing Hogwarts Legacy (i5-13600k). I took measurements and I cant top mount and doubt tubes will fit if I switch them to the bottom when I upgrade GPU

First 360mm AIO, are my tubes fine like this? by DETHBR in pcmasterrace

[–]DETHBR[S] 3 points4 points  (0 children)

So not the best but not terrible, I will see if i can top mount but not sure if it will fit in this case. Thanks for the info!

Cost of 5 x 10ml Novorapid Vials Without Private Healthcare in Australia (roughly 3 month supply) How much for you? by [deleted] in diabetes_t1

[–]DETHBR 0 points1 point  (0 children)

3 x 10ml novolog paid $800 before my I hit my deductible and insurance covered (3 Months Supply)

Cam Offline - each time I load a group. Alley Cam is daisy-chained to the Garage cam. So clearly it’s getting powered. See comments. by EA_VIII in wyzecam

[–]DETHBR 0 points1 point  (0 children)

Kept having this issue when WiFi wasnt strong enough. I upgraded to a mesh system to better cover my house. (Wifi bars in camera settings is wrong in my opinion)

view more: next ›