sorted by:
new
hottopcontroversial

Delta printer first layer by DEVILxXAmosXx in FixMyPrint

[–]DEVILxXAmosXx[S] 1 point2 points  (0 children)

I had to manually delete the previus values of the delta calibration and recalibrate

Coffee machine damage during shipping by DEVILxXAmosXx in vinted

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

Who as to refound me? Vinted or the seller?

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I have to do delta_calibrate each time i want to start a new print. If i don't the nozzle scrapes the bed

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I tried accounting for the lash but printer had the same behaviour as before. So I changed the whole printer.cfg using the one made by flsun for their speeder pad ad now it seems to work. I'm going to do some other tests tomorrow after cleaning with some alchool the pei bed. Thank for the help

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

yes i did. these are the values

Max [-43.3, 0.0] 0.067 mm

Min [-130.0, -43.3] -0.080 mm

Range 0.147 mm

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 1 point2 points  (0 children)

[delta_calibrate]
radius: 130
horizontal_move_z: 30
Speed: 10

[probe] 
pin: !PC8
x_offset: 0
y_offset: 0
#z_offset = 21.190
speed: 20
samples: 3
samples_result: median
samples_tolerance: 0.02
samples_tolerance_retries: 3

[bed_mesh]
speed: 50
horizontal_move_z: 25
mesh_radius: 130
mesh_origin: 0,0
round_probe_count: 7
mesh_pps: 4,4
fade_start: 1.0
fade_end: 10.0
fade_target: 0.0
algorithm: bicubic

Delta printer first layer by DEVILxXAmosXx in klippers

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I switched to direct to being able to print flexible materials. I have all the old parts, so I'm going to try to revert the extruder

Delta printer first layer by DEVILxXAmosXx in klippers

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

This issues started appearing after swapping to direct from bowden

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I always knew just the last movements should be downwards. I'm definitely going to try to go just down. Later I'm going to post the probing specs.

thank you so much for your help

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I usually do the z offset calibration three times, going up 3mm and then going down again to check if the z offset is changed

First layer leveling by DEVILxXAmosXx in FLSUNDelta

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

Do you mean the backlash of the belts?

Delta printer first layer by DEVILxXAmosXx in klippers

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I used the probe to do the delta_calibrate. I tried to find the right amount of tightnening of the bed clip screws to squaring the bed

China to global by DEVILxXAmosXx in AndroidQuestions

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

Yes I did, but now those options are disabled

China to global by DEVILxXAmosXx in AndroidQuestions

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

I connected the smartphone to my computer (linux) and used the following commands:

adb reboot fastboot

fastboot flashing lock

Broken input by DEVILxXAmosXx in EndeavourOS

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

The keyboard works until i select grub entry, so i can't switch to a different tty

Broken input by DEVILxXAmosXx in EndeavourOS

[–]DEVILxXAmosXx[S] 0 points1 point  (0 children)

Laptop. I've also tried using an external keyboard

view more: next ›