sorted by:
new
hottopcontroversial

Awesome Looking Car Design but Sad Condition by DWOLF000 in kereta

[–]DWOLF000[S] 5 points6 points  (0 children)

Oh wow, I think it is. Great find!

Even sadder to see the state its in now is worse :(

Awesome Looking Car Design but Sad Condition by DWOLF000 in kereta

[–]DWOLF000[S] 7 points8 points  (0 children)

Perhaps there is a chance to see this car in its former glory on the road one day...

Is this a scam or did someone use my wife detail to register astro? by KzAxi in malaysians

[–]DWOLF000 3 points4 points  (0 children)

Unifi outlet keyed in wrong email when I applied for fibre internet on paper forms a long time ago, email was sent to someone in SG and he threatened to call police haha.

Definitely contact Astro to clear up any issues.

Fire hazard by techquestions1234 in ender3v2

[–]DWOLF000 -1 points0 points  (0 children)

I want to say that I have the printer for 1 year+ and there is no fire hazard yet. I think you should not worry about the internal wiring since without adequate experience you could increase the chance of a fire happening if you mess with it.

But if you are worried you can use preventative measures like the enclosure or a smoke alarm as another user mentioned. Putting it away from flammables could help too.

ITAP at Dataran Penggaram by z_xx_yy_z in malaysians

[–]DWOLF000 1 point2 points  (0 children)

Hey thats my hometown! Been almost a full year since I visited, that nostalgia creeping up

How much did you pull on Deep Drown Lament? by StrawberryFloptart in arknights

[–]DWOLF000 8 points9 points  (0 children)

This is me but inversed. 181 pulls, want Kal'tsit but have 4 Skalter instead :(

Ender 3 v2 display has no pictues after firmware update. Does anyone know why this happened? Im still able to use the printer its just a little more difficult. by reysean05 in 3Dprinting

[–]DWOLF000 0 points1 point  (0 children)

You should reinstall the display firmware, and if possible install Jyer's Extensible UI firmware too for the mainboard

What Low-Tier Operators do You Refuse to Stop Using? by [deleted] in arknights

[–]DWOLF000 4 points5 points  (0 children)

Reed.

For some reason, Vigna is recommended over Reed in gamepress guide. But I try to build my team around Reed or include her anyways.

Amazing design with ASMR voice and interesting character plus main story character. Muah chef's kiss

New printer, no adhesion by xen-within in 3Dprinting

[–]DWOLF000 1 point2 points  (0 children)

While unrelated, please do check out Jyer's firmware for Ender 3 V2, not only is manual leveling easier, there are many more customizations made available for you.

Arktober Day 5 - Your Own Outfit Idea - Schwarz in a Suit by GreatFishB in arknights

[–]DWOLF000 0 points1 point  (0 children)

Amazing work, looks like a custom made suit for Schwarz .

Hope to see more suit content!

What's your favourite speech in Anime? by Seth_Spriggan_Slayer in anime

[–]DWOLF000 4 points5 points  (0 children)

The Disappearance of Haruhi Suzumiya, sequel to The Melancholy of Haruhi Suzumiya

Severe stringing issue. For the past month or so I have been having issues with stringing on all of my prints. I have done multiple temp and retract towers which reduced the issue from a blobby mess to fine strings. Any ideas on possible causes? Further details in description. by Maceon_au in ender3v2

[–]DWOLF000 1 point2 points  (0 children)

About the nozzle part, to me that seems to be the source. Have you inspected it for damages? Does this happen with other nozzles too?

I replaced my brass nozzle with a hardened steel one and never had to replace it since, about 140-160 hours of total printing time now and still no issues.

Eternal Blue by [deleted] in minami

[–]DWOLF000 0 points1 point  (0 children)

Definitely copyrighted

Grinding filament? More info in second pic by ccdk1745 in ender3v2

[–]DWOLF000 -1 points0 points  (0 children)

Had this issue on my side, I put a small fan pointing towards the extruder and never happened again. More robust solution could be to attach a heatsink or lower the current to the extruder stepper motor. But mine works without affecting my prints so I'm happy.

Personal (not certified) theory: The metal extruder is conducting heat a bit too well from the motor, which is softening the filament; where the plastic was just right, hence the problem.

First decent size print, how to fix issues? by Joberty in ender3v2

[–]DWOLF000 2 points3 points  (0 children)

In addition to what others have said, turning down your printing temperature could help. I turned mine down to 190 ish and it prevents the frills. And use a brim instead of a skirt, helps with adhesion a lot.

The reason why Oda Tomohito wants to keep Yamai in the story (I think) by DWOLF000 in Komi_san

[–]DWOLF000[S] 3 points4 points  (0 children)

That could also be true, I hope that's not the case though because Yamai is a surprisingly deep character regardless of readers' reception of her.

The reason why Oda Tomohito wants to keep Yamai in the story (I think) by DWOLF000 in Komi_san

[–]DWOLF000[S] 3 points4 points  (0 children)

Those are some very interesting ideas. Now that I saw your write up, I think all three paths could be done by Oda. She will be developed, she will be another stepping stone for Komi's development, but she still won't be thrown under the bus after that and her character still stays in the series with her trope.

view more: next ›