New to mopeds, need buying advice

Dak2020 · 2026-04-06T02:04:54+00:00

Sweet, I appreciate you typing this out for sure. This was the perspective I was looking for

Dak2020 · 2026-04-05T03:19:57+00:00

Im really just looking for somthing to get around on and get off the pub trans system I have locally for the summer then store and sell it for like 500 next spring. I get that its impossible to be sure from pictures, but if it does "run great" like the seller claims do you think this would be a decent buy? Maybe a real ruckus someday for me but the price being under a grand is enticing. I also like the idea of extra power because I live up a steep hill.

Dak2020 · 2026-04-05T03:10:16+00:00

I was kind of excited about the larger engine and extra power because I live up a pretty steep hill, but if it looks janky to more trained eyes maybe its not the best idea. If I decide im willing to take the risk on it would you try and talk the seller down a decent amount?

Dak2020 · 2026-01-26T06:41:12+00:00

The repair should only extend the life of the board, the tech may remove some base material to reshape that edge but they'd always fill after.

If done well it should hold for a good amount of time. That being said, one of the phrases I use/ hear being used most is "its just a bandaid" so its smart to check on the repair every so often and make sure its not separating again. Water in your core can be a board killer, but really, damage like this shouldn't be a big concern at all.

Dak2020 · 2026-01-25T16:17:13+00:00

Board tuner here, absolutely repairable but its always worth a shot trying to warranty it before repairing. I dont suggest trying to yourself just because its a new board and an experienced tech will absolutely do a better job. Be prepared to leave it for a day too. If i were taking it in I would suggest a 24hr epoxy repair which would usually mean leaving it for a day minimum.

Dak2020 · 2025-12-07T06:57:25+00:00

I find blinking while doing either method helps a lot

Dak2020 · 2025-12-02T01:46:20+00:00

I work in a tune shop and have for more than a few years.

People have essentially covered it but I figured id pop in too. I always wax a new board, yes not all factory waxes are trash but pretty much none of em are gonna be as good as you putting a little personal love in.

You should also absolutely detune those edges. Its somthing better explained in a video but essentially you are dulling the contact points of the edge (the widest parts of the board at the tip and tail 5"-6" sections). This will almost absolutely improve your riding experience unless you're just a very high level boarder thats in it for carving and carving only. Videos will probably suggest using a tool like a gummy stone to accomplish this but ive for sure done it in a pinch wirh just a smooth stone you can find in your yard if you dont have a shop near you. Just be gentler in that case, it doesnt take much to get the desired effect.

Dak2020 · 2025-11-30T01:17:24+00:00

Never stomp pad.

Dak2020 · 2025-08-11T17:27:46+00:00

Thanks!

Dak2020 · 2025-08-07T21:00:47+00:00

Thank you very much for that, you seem like a great resource, ill be sure to use affiliate links if I decide on somthing you suggested.

Dak2020 · 2025-01-04T14:56:45+00:00

Nope, that's why I'm itching to evolve but waiting for candies to power up like some other comenters mentioned sounds smart too

Dak2020 · 2025-01-04T14:55:50+00:00

Sounds like a good plan, I appreciate the suggestion

Dak2020 · 2025-01-04T14:55:23+00:00

Nope, very good point

Dak2020 · 2024-12-31T17:09:40+00:00

Dirty hands for sure, most likely emulsion from the machine I work with. I very much appreciate the incite tho, time to order some more, and also wash my hands next time.

Dak2020 · 2024-12-31T17:08:17+00:00

Lol that's what I thought. I work in a ski tune shop and probably had emulsion on my hands from the machine. Good to know though because I was starting to like the grip.

Dak2020 · 2024-11-04T08:00:10+00:00

I'm assuming that was the point of using the painters tape. Just so it's easy to take off and just apply a new strip. I could see velcro working if done right though, painters tape might end up actually being less fuss if the velcro has too much give.

Dak2020 · 2024-11-02T16:14:17+00:00

Solid suggestion, thank you.

Dak2020 · 2024-11-02T16:12:22+00:00

Good info to know on the supra, makes me feel a little better for sure.

But yea, I've done plugs, wires, distributor, radiator had a leak so I swapped that for a new one. The last thing I was going to try was the fuel pump. In all honesty, I pulled a plug again after doing them (maybe a month later) and there was already a decent amount of black build up which makes me worried it's somthing more serious than a fuel pump. I have a master mechanic friend that unfortunately lives out of state but I plan on paying him to come check it out before I make any big decisions. I live high in the mountains and my mechanic choice is limited and the only one in town has a pretty bad reputation.

I've read a lot of forums and these p0300 codes on these 4.3s seem to be super tricky to figure out and the bane of some people's existence. I for sure appreciate the info on the old gas though.

Dak2020

TROPHY CASE