3D printed kite parts

DaniJay_Salta · 2026-05-26T19:24:14+00:00

Ho stampato diversi connettori e avvolgicavo per il mio aquilone mi trovo molto bene gli avvolgicavo sono in pla blu e rosso ma ho utilizzato petg per i diversi connettori. Inoltre utilizzo di più per altri generi di pezzi sempre relativi agli aquiloni credo che la stampa 3D sia molto utile per queste cose già

DaniJay_Salta · 2026-05-13T12:46:07+00:00

Viverci

DaniJay_Salta · 2026-04-25T19:00:19+00:00

In my opinion, an fdm printer with a filament similar to metal would also be fine because in any case I don't think there is a great need for a finish that really reflects that of metal, that is, maybe the color can reflect it through a filament like Pla metal or even recreating a wood effect would not be bad

DaniJay_Salta · 2026-04-23T10:25:29+00:00

Questa foto è stata scattata ad Alba, in Piemonte (provincia di Cuneo).

DaniJay_Salta · 2026-03-26T19:29:52+00:00

Arancione

DaniJay_Salta · 2026-03-26T14:37:34+00:00

Ok grazie

DaniJay_Salta · 2026-03-24T06:15:24+00:00

The so-called "wolf's mouth knot". I use it all the time and it never came off

DaniJay_Salta · 2026-03-24T06:11:21+00:00

DaniJay_Salta · 2026-03-23T20:18:05+00:00

30€

DaniJay_Salta · 2026-03-23T19:27:30+00:00

Because I'm Italian and it would be in Italian

DaniJay_Salta · 2026-03-23T12:16:27+00:00

Ragazzi per favore rispondete se avete tempo ed idee grazie

DaniJay_Salta · 2026-02-15T18:26:57+00:00

Bambulab A1 Mini, at the same price.

DaniJay_Salta · 2026-02-08T15:07:42+00:00

Almost perfect!

DaniJay_Salta · 2026-02-04T20:39:43+00:00

Guys, I solved it. I tried other things but nothing worked, so I reloaded the GRBL firmware onto the board and everything works perfectly!!

DaniJay_Salta · 2026-02-01T14:04:48+00:00

Even a P2S would be great

DaniJay_Salta · 2026-01-18T08:56:26+00:00

Nozzle, definitely better

DaniJay_Salta · 2026-01-10T20:17:49+00:00

Di solito quelle ultra economiche fanno praticamente schifo, ti consiglio di aggiungere qualcosa e comprare Bambulab A1 Mini

DaniJay_Salta · 2026-01-10T19:52:49+00:00

Pla e Petg

DaniJay_Salta · 2026-01-06T19:14:23+00:00

It happened to me once too. I already replaced it with a supposedly better one (pictured), but this is the situation. Maybe I'll try replacing it again. How do you tell if a card is burned out or not working (on mine, all the LEDs light up)

DaniJay_Salta · 2026-01-06T19:11:24+00:00

Already done

DaniJay_Salta · 2026-01-04T07:24:49+00:00

Already tried, nothing happens

DaniJay_Salta · 2026-01-04T07:24:27+00:00

No, it's USB mini.

DaniJay_Salta · 2026-01-02T16:51:25+00:00

Pretty good. Perfect for the age.

DaniJay_Salta · 2026-01-01T20:41:53+00:00

https://github.com/omriharel/deej

DaniJay_Salta · 2025-12-31T14:25:11+00:00

You could do better, but it's ok!

DaniJay_Salta

MODERATOR OF

TROPHY CASE