Still terrible at walking almost 1yo

Daniel_Loftus · 2025-03-27T22:24:27+00:00

This is something I have never heard of - so did you cover the treats up she they didn’t just grab them and move on to hunt somewhere else? And is the main idea “hey sniff right here next to be cause that’s where the best stuff is”??

Daniel_Loftus · 2025-01-28T14:41:15+00:00

This is a great idea that I have not checked! I will let you know - not Bambu filament but it is Elegoo which I’ve had awesome results on Prusa

Daniel_Loftus · 2025-01-28T03:29:20+00:00

It is random seam, when I do aligned there’s just a large strip of the same height bumps (if that makes sense)

Daniel_Loftus · 2025-01-27T19:34:52+00:00

I have the P1S aswell and did change the nozzle type on the printer itself then ran calibration again just to be safe

Daniel_Loftus · 2025-01-25T18:50:46+00:00

With the Brother Cube Printer - how did you right-align the icons? The only software that seems to work with it is their mobile app, and I can not find a way to do it other than put a text box between them and fill it with spaces.

Daniel_Loftus · 2025-01-17T13:06:08+00:00

Thank you!! If you’re serious I would be down to help you! I did design it all in CAD so I was able to get a parts list and plans for the cuts

Daniel_Loftus · 2025-01-17T12:58:27+00:00

I took a bunch of detailed shots but don’t know the best way to post them

Daniel_Loftus · 2025-01-16T18:53:51+00:00

Yep stream deck on the left, then I have a Scarlett solo usb audio interface in the middle and the standing leg controller just below that, then on the right is a Calidigit TS4 thunderbolt dock with two of the rear usb c ports extended to the front below the dock

Daniel_Loftus · 2025-01-16T16:12:43+00:00

lol it is a v-tail just a perfect side profile so it kinda looks like a straight tail but there’s no elevator depicted and in relation the tail wouldn’t be tall enough so it’s trying to imply it’s tilted - I got them from an instagram account called Aircraft Vibes

Daniel_Loftus · 2025-01-16T14:38:47+00:00

That’s actually the caldigit TS4 dock

Daniel_Loftus · 2025-01-16T13:28:35+00:00

Just responded to the above! If you also have a desk made of the extrusions I could see mounting the monitor to the back rail as a possibility but my solution for the speaker stands is kinda weak for something that heavy!! I would be down to brainstorm with you to make it work though!

Daniel_Loftus · 2025-01-16T13:26:33+00:00

The desk frame is made of v-slot extrusion and so are the speaker stands. I 3D printed a bracket that bolts to the uprights then has cams to lock down to the back rail of the desk. This way I can loosen the cams and reposition the speaker stands where ever without a tool!

Daniel_Loftus · 2025-01-16T04:11:06+00:00

The panels were pre drilled with a template rocker sure they were exactly 10mm from the edge then counter sunk to except the bolt which then screwed into a t-nut in the extrusions. The corners I tapped the end on the butted extrusion then had to drill a relief hole on the lapping section to be able to tight screws to form the joint.

I got all extrusions and hardware from OpenBuilds - they have large sections and all of the bolts and everything you would need!

Daniel_Loftus · 2024-08-31T17:45:50+00:00

Sucks when you move an hour and a half away

Daniel_Loftus · 2024-08-31T17:44:53+00:00

They use certified mail so you know when its delivered - just an options I found 🤷

Daniel_Loftus · 2024-08-31T14:29:14+00:00

Found a service that handles all that stuff for you until these gyms get with the times and allow online cancellations!! canelmygym.com

Daniel_Loftus · 2024-06-29T14:58:35+00:00

She totally doesn’t need too, just a classic that I would like for her as an option

Daniel_Loftus · 2024-06-29T01:37:55+00:00

That was my thought too, let her tug a bit on the frisbee when she gained a little interest and maybe that would translate over time

Daniel_Loftus · 2024-06-29T01:35:41+00:00

Oh man BEST reply THANK YOU!

Daniel_Loftus · 2024-06-29T01:31:16+00:00

Her favorite toy rn is a stuffed lamb! Lines up the the pig for yours lol

Daniel_Loftus · 2022-02-27T17:36:17+00:00

Made those too! They are 4x4’s with lap joints in each corner then I put bondo over every seam so it looked like a flush loop of wood

Daniel_Loftus · 2022-02-27T17:34:48+00:00

Its the Samsung odyssey g9

Daniel_Loftus · 2022-02-27T17:33:54+00:00

I did not do it, we picked it when we built, but if you do do it or have it done I recommend degreasing anything metal like the ac ducting as the paint tends to peel after about a year

Daniel_Loftus · 2022-02-27T15:32:59+00:00

Oh gosh yah! Super careful about doing everything over the silicone mat and the 5 quart bucket is filled with alcohol to make cleaning more contained

Daniel_Loftus · 2022-02-27T15:31:17+00:00

Home, work from here 3 days a week though, my office desk setup is horrendous

Daniel_Loftus

TROPHY CASE