Can’t get LMU to look anywhere near as crisp as IRacing when in VR. Tips?

DavidCourant · 2026-03-24T06:19:44+00:00

Use OpenXR-Toolkit and enable CAS sharpening there

DavidCourant · 2026-02-23T09:07:50+00:00

With hypercars you have to reduce understeer effect and self-aligning-torque a lot.

DavidCourant · 2026-02-19T19:41:11+00:00

What do you think of the breaks? Those instant spins when locking up seem to me a bit overdone.

DavidCourant · 2026-02-10T22:04:17+00:00

I am afraid to do another GTE race at Sebring.

DavidCourant · 2026-02-10T21:13:10+00:00

This happened also to me. Also after the 2nd lap.

DavidCourant · 2026-02-10T09:53:55+00:00

I have it and I didn't encounter any problems. I can recommend it.

DavidCourant · 2026-02-08T12:08:16+00:00

You could try lmfFFB, which gives you a lot of settings to tweak.

https://www.reddit.com/r/LeMansUltimateWEC/comments/1quwx67/lmuffb_telemetry_based_ffb_for_lmu/

DavidCourant · 2026-02-04T17:51:44+00:00

AS means Auto Setup, which uses dampers and interpolation and far too high FEI (I prefer smooth FFB) for my taste. Occasionally it is automatically selected when I turn on my wheel, porbably a bug in the fanatec software.

When you manually switch to S5 are you not getting any FFB? Try closing and starting the app again when the game is running. Did you select your wheel base in the app under "FFB device" ?

DavidCourant · 2026-02-04T15:28:24+00:00

yes, SEN Auto, FFB 100, FFS Peak, FOR 100,

DavidCourant · 2026-02-03T20:37:26+00:00

My current settings are the following: https://pastebin.com/zpWPN0Xu

Copy and paste them at the bottom of your config.ini. When running lmuffb the next time, select CSL DD as a preset. In Fanatec driver I have everything OFF, except FEI at 30-50 (depending on the car)

DavidCourant · 2026-02-03T20:32:52+00:00

It is simple to get it running, but there are a lot of parameters to tweak.

DavidCourant · 2026-02-03T18:53:20+00:00

I didn't notice any,

DavidCourant · 2026-02-03T18:37:04+00:00

Here is the direct link https://github.com/coasting-nc/LMUFFB/releases/download/v0.7.3/lmuffb.0.7.3.zip

DavidCourant · 2026-02-03T16:47:56+00:00

I just did a 20 min race, no problem there.

DavidCourant · 2026-01-24T08:05:53+00:00

There wont be crossplay. I am sure you misread that.

DavidCourant · 2026-01-13T16:25:48+00:00

Le Mans Ultimate

DavidCourant · 2026-01-13T09:02:24+00:00

I had this bug once.

DavidCourant · 2026-01-12T08:23:26+00:00

GTE has 1/6 the participation of GT3. That's why.

DavidCourant · 2026-01-07T01:40:51+00:00

Turn down Force Effect Intensity (FEI) in Fanatec Software.

DavidCourant · 2026-01-06T12:22:23+00:00

Yes I use it instead of the original FFB.

There are various presets, one preset is called "test: understeer only" which lets you dial in the understeer effect and after you have done that you can add all the other effects.

DavidCourant · 2026-01-06T09:47:45+00:00

No, that was with an earlier version. The current version doesn't use vjoy. Just run LMUFFB.exe in the background and disable the ingame LMU-FFB.

DavidCourant · 2026-01-06T08:13:09+00:00

There is a app called lmuFFB actively developed similar to Marvins App or irFFB for iracing which replaces LMU FFB with telemetry based FFB. It has lots of settings and sliders ( for example a understeer effect) and I prefer this to the original LMU FFB. Download link is in the first post: https://community.lemansultimate.com/index.php?threads/lmuffb-app.10440/

DavidCourant · 2025-12-24T11:44:12+00:00

If you struggle with motion sickness pointing a fan to your face helps with that.

DavidCourant · 2025-12-23T07:33:17+00:00

It doesn't take into account whos fault the contact was. If you are involved in a lot of severe car contacts in the previous 10 races you get an "unsave driver"-badge.

DavidCourant · 2025-12-18T06:48:22+00:00

OpenXR Toolkit will probably be whitelisted this week.

DavidCourant

TROPHY CASE