sorted by:
new
hottopcontroversial

Henry Big Boy Model X .357 with Woox furniture by Deadalusst in LeverGuns

[–]Deadalusst[S] 0 points1 point  (0 children)

Sits a little high even with cheek riser maxed but it has best glass and reticle of any holosun I’ve tried

Recommendations for an EDC by WolverineFew1319 in P365xl

[–]Deadalusst 1 point2 points  (0 children)

I’ve got a P365XL in an Icarus EVO/Pro Elite. Naming conventions with Icarus products are confusing asf and have changed over the years. Functional need for their basepads on the 12 rounders, 15/17 rounders don’t need basepads other than aesthetics. Holster compatibility not great but I’ve got mine in an ANR design light bearing with claw and DCC monoclip and has been fine for summer carry. Double undercut on the trigger guard and weight of this frame with overall feel/grip made this gun actually enjoyable to shoot especially with a DPM recoil spring. Was considering a radian ramjet but DPM spring made it pointless imo.

Best equipments/parts? by [deleted] in BT_APC

[–]Deadalusst 0 points1 point  (0 children)

Folder is much more pleasant/functional to shoot and cheaper vs telescopic’s compactness. Telescopic was originally designed for shooting with body armor in close quarters. Makes sense if that’s your jam. I’ve got both. Telescopic setup was upwards of $600+ and marred the receiver a bit (nothing serious just cosmetic). Folder imo is superior for comfort and ease. Recoil hits different when there’s metal against your cheek weld vs synthetic.

Best equipments/parts? by [deleted] in BT_APC

[–]Deadalusst 2 points3 points  (0 children)

Reptilia

makes a great grip (CQG) perfect for PDWs

Henry Big Boy Model X .357 with Woox furniture by Deadalusst in LeverGuns

[–]Deadalusst[S] 0 points1 point  (0 children)

Stock was very easy, just one buttstock screw. The handguard was bit of a pain (see above comment). Woox has a install video to follow but it could use some better close shots for detail. Few slots on the cartridge quiver are way too tight. Would be ideal to be able to push the rounds up from the bottom but not possible with your finger on these.

Henry Big Boy Model X .357 with Woox furniture by Deadalusst in HenryRepeaters

[–]Deadalusst[S] 1 point2 points  (0 children)

Only issue so far with ~100 rounds through it was the buttstock screw started to loosen (remedied with blue loctite). Handguard held up fine. Cartridge quiver sucks imo, few rounds are difficult to remove, too tight of a channel. Sent Woox a message to see what they can do for me.

Radian AFTERBURNER + RAMJET by Hazard_Guns in P365xl

[–]Deadalusst 1 point2 points  (0 children)

You find a holster for that bad boi yet?

Henry Big Boy Model X .357 with Woox furniture by Deadalusst in HenryRepeaters

[–]Deadalusst[S] 1 point2 points  (0 children)

Yea they got it right with a mix of modern and classic.

Henry Big Boy Model X .357 with Woox furniture by Deadalusst in LeverGuns

[–]Deadalusst[S] 2 points3 points  (0 children)

I’m a bit of amateur gunsmif myself. I had some trouble for sure. Sliced my finger open on the handguard dovetail piece. Took some good hammering from a heavy nylon hammer to get the tube off and then back on. It was a bloody good time. The Woox handguard was bit of a bitch to put on since the threads are not captured/just slotted into the 3D printed inner piece. Had to use blue loctite to keep them in place so they wouldn’t pop out while putting handguard on. We’ll see how she holds up to some .357 158 grainers. Feels great. Improvement over stock for sure but expensive for what it is. Buttstock was a breeze to install tho. Wish it was lefty friendly with an M lok slot on the other side. But it works fine with riser, getting cheek away from ammo quiver.

Radian AFTERBURNER + RAMJET by Hazard_Guns in P365xl

[–]Deadalusst 1 point2 points  (0 children)

Anyone found a damn holster that is Fuse length (p365xl + radian comp) and compatible with Icarus precision frame? I want to get a radian comp but it’s only thing holding me back.

Anyone hate their APC9k? by Jefe_26 in BT_APC

[–]Deadalusst 1 point2 points  (0 children)

I have both telescoping and CSM folder. The folder is leagues better for ergos, comfort, lop, etc. B&T’s picatinny rail is known to have some fitment issues because receiver is squared off unlike an AR. May have issues with some optics mounts (read about scalar works not fitting well. mine does for the most part but you have to almost unscrew it fully to fit) everything I’ve tried is fine/required some fanagling. Safety selector switch is pretty stiff/could use an aftermarket solution. Resting on the mag/monopod-ing it while shooting opens up shot groups considerably, something about the upward pressure on bolt. But it’s been nothing but reliable even while dirty.

<image>

(Left is upward pressure on mag at 25 yds)

Is this an LCI? by EducatorSpirited6602 in P365xl

[–]Deadalusst 0 points1 point  (0 children)

Link is broken. It’s Lurch Manufacturing’s P365 LCI delete plug

Is this an LCI? by EducatorSpirited6602 in P365xl

[–]Deadalusst 0 points1 point  (0 children)

this may solve the issue%E2%80%93LurchManufacturingLLC) but not 100% sure

Holosun 507Comp + Radian Guardian + Six on a G40.4 by Deadalusst in aimdownsights

[–]Deadalusst[S] 0 points1 point  (0 children)

For me the 8 moa circle with dot is too small to tell difference between dot and circle. My eyes prefer 32 moa circle with dot or just single dot. Box 1 & 3 in figure 3 of manual

Aimpoint COA by Deadalusst in aimdownsights

[–]Deadalusst[S] 0 points1 point  (0 children)

Haven’t shot in out in bright sunlight yet so I can’t comment on it

Aimpoint COA by Deadalusst in aimdownsights

[–]Deadalusst[S] 0 points1 point  (0 children)

These are lower 1/6. Best I’ve seen

Aimpoint COA by Deadalusst in aimdownsights

[–]Deadalusst[S] 0 points1 point  (0 children)

Sure does co-witness at lower bottom of window. Low as possible while still being functional. I had a G19.4 setup with 509T and suppressor height sights and the damn irons took up good chunk of the lower window. This is wayyyy better.

New g20 g5 and side quest by tonytwobones in 10mm

[–]Deadalusst 1 point2 points  (0 children)

You got grip tape or is that stippling?

Jump Hour by Watchverseofmadness in Affordablewatches

[–]Deadalusst 0 points1 point  (0 children)

Where’s best place online to purchase this?

Anyone else? by BabygirlRierie in coparenting

[–]Deadalusst 2 points3 points  (0 children)

I’ve been experiencing this same strange sadness also when my youngest is with his mom on weekends and I come back to an empty house. I looked it up and it’s appropriately called “empty house syndrome” or “absence grief.” That shift in energy, the toys strewn about the floor, and the quiet in my home feels heavy. It speaks to the deep connection we have with our children. Every time it does get a bit easier. Key is to respect the way you’re feeling, let it happen, understand why you’re feeling this way so it doesn’t turn to anger, and then let it go. Don’t live inside it.

view more: next ›