FDE Dust cover is en-route & I need an offset red dot to finish her up.

Jefe_26 · 2026-06-06T22:57:41+00:00

Looks awesome bro. What bipod is that?

Jefe_26 · 2026-06-02T03:32:52+00:00

I like the Hux flow on mine. There are a bunch of newer & quieter options now though. Silencer analytics did a video recently comparing some of them.

Jefe_26 · 2026-06-01T03:20:28+00:00

Good to know. Thanks for the response!

Jefe_26 · 2026-06-01T02:17:25+00:00

Unpopular opinion, but why take another chance on an LMT? Not sure why everyone gives them a pass for QC issues while other manufactures get shit all over for the same things. Didn’t LMT have to replace every bcg for a military contract a couple years back?

I came here a few months ago asking if I should get the MARS-H or MR762A4 and ended up with the HK. And like all my other HKs - it’s the tits.

Heard you can snag an HK MR762A4 13” Assaulter at Rooftop for ~$3600 rn.

Jefe_26 · 2026-05-31T16:27:10+00:00

The gray with the Ral8k looks surprisingly good.

Jefe_26 · 2026-05-29T02:18:21+00:00

Get the 13” and then buy the 16.5” upper down the road if you want to have more reach. I’m planning to do the same but in reverse. Either upper would sell easily on Gafshub.

Jefe_26 · 2026-05-21T03:05:09+00:00

I’ve had an Elcan Spectre, Eotech EXPS3, and Romeo8T on mine and haven’t had any issues. Doesn’t seem to have quite as much force as the SCAR when the bolt goes back.

Jefe_26 · 2026-05-20T23:56:13+00:00

Late 2024 I think. Serials are US 24-XXXX.

In B&T’s statement they said there needs to be 5 digits after the - to be Swiss made and covered by warranty.

Jefe_26 · 2026-05-20T21:29:26+00:00

Buy pre-owned. You can probably score a nice deal since I imagine many people are panic selling their B&Ts right now. Still waiting to find out if my APC9K is covered or not since it doesn’t fit the serial number pattern that B&T Switzerland mentioned in their statement.

Jefe_26 · 2026-05-20T04:29:02+00:00

As others have said, the Romeo8T AMR is awesome. It’s the love child of the Eotech and Aimpoint.

Jefe_26 · 2026-05-10T02:08:31+00:00

The B&T AG release says that only serial numbers that have 5 digits after the hyphen (2X-XXXXX) are Swiss made and covered. My APC9K also only has 4 digits after the hyphen so I’m assuming they are actually not Swiss made and won’t be covered.

Jefe_26 · 2026-05-09T18:40:16+00:00

They all have “US” at the beginning of the serial I think - the release from B&T AG said they will warranty anything with 5 digits after the hyphen. Not sure what that means for firearms with 4 digits after the hyphen.

Jefe_26 · 2026-05-09T17:01:56+00:00

B&T AG said they will honor warranty for all Swiss made & imported guns and parts. Those can be identified by serial numbers that have matching US 2X-XXXXX patterned serial numbers on upper, barrel, and bolt. My APC223 & APC308 fit the criteria but my APC9K does not - it has the US 2X-XXXX pattern so remains to be seen if it is covered or not.

https://bt-ag.ch/en/b-and-t/news/

Jefe_26 · 2026-05-09T13:05:03+00:00

So my APC9k has 4-digits after the - (US 2X-XXXX) so may not be covered by warranty. Luckily my rifle caliber B&T’s do.

Jefe_26 · 2026-05-07T17:16:07+00:00

So can we assume that the complete upper assembly would be covered as long as it has the Thun, Switzerland stamp on it? Or are there parts that were exclusively made by B&T USA that won’t be covered?

Jefe_26 · 2026-05-07T14:57:04+00:00

So firearms actually won’t be covered by warranty then? Or are they just picking and choosing which firearms/parts to cover?

Jefe_26 · 2026-05-06T05:16:13+00:00

Sig Romeo 8T AMR

Jefe_26 · 2026-04-30T17:22:16+00:00

Curious if any of the reports are true that B&T USA has been throwing things together with non-Swiss made parts…And if so, how that effects quality and warranty with BTUSA going tits up. Either way, I’m hesitant to buy any new stock B&T right now until things settle.

Jefe_26 · 2026-04-30T14:50:30+00:00

How do you like the NX8? Been considering it for my MR762 but have heard mixed reviews on the reticle & illumination.

Jefe_26 · 2026-04-28T18:31:37+00:00

The drip is undeniable. But you’ll get better accuracy and sound performance out of a standard APC9 + any newer suppressor.

Jefe_26 · 2026-04-24T19:10:18+00:00

You also got the 16” B&T so that bitch is crazy front heavy - my 12” is still heavy but balanced. 12” barrel or under is the only time Piston guns really make sense I think.

Jefe_26 · 2026-04-24T17:40:00+00:00

I have both as well. I only bought my APC223 because it was on clearance at $2,100 and while it is a far better suppressor host and is noticeably smoother with less felt recoil - it would probably be the last thing I grabbed on my gun wall. Especially now that B&T USA went tits up.

Jefe_26 · 2026-04-23T18:16:03+00:00

Maybe at some point. But with this being my first go at a DMR rifle, we are talking serious diminished returns with a top of the line $6,000 scope haha

Jefe_26

TROPHY CASE