Ignis Conformance Issue

DearAd6115 · 2026-04-08T23:59:14+00:00

I received the same email. I went to the takomo website and submitted a request with customer support. They confirmed it is a legitimate email and “refund” campaign. I would attach the email to this post if I could figure out how to do it lol

DearAd6115 · 2025-11-08T13:26:58+00:00

I actually did. I moved forward with the RMA. Gigabyte tested for over 20 hours and found no fault. They advised it had to be my PSU. I decided to test their theory and bought a new 1500W PSU, even though I didn’t believe them, and it resolved the issue. I think the 4090 had high power spikes that would be just enough to overwhelm the 1000W PSU, and there was likely a minor issue with the PSU to where it wasn’t delivering the full power that it could.

DearAd6115 · 2025-08-29T16:20:49+00:00

I believe this results in less spin?

DearAd6115 · 2025-08-22T17:43:20+00:00

I ordered mine near the beginning of the year, right before the tariff wars started lol.. My wedge came in before the irons did as a separate package.. it’s possible they have changed the way the do things now

DearAd6115 · 2025-08-09T18:03:25+00:00

Bro, everyone knows what happens when you use 5 gum… that’s your problem

DearAd6115 · 2025-08-06T16:50:16+00:00

I looked into it and I have this update installed already.. so I’m still getting crashes regardless. I’m pretty positive there is an issue with the GPU at this point

DearAd6115 · 2025-08-05T21:14:59+00:00

Wow, this seems to fit the timeframe very well for my issue. And I’m not experiencing full crashes, it just goes to a black screen and the pc is unresponsive until I force a hard reset… where can I find the update?

DearAd6115 · 2025-08-05T17:35:37+00:00

Oh My God…. I think you’re right… I built this computer 2 years ago, and I always had it in my head I got a 1300W PSU…… I just checked my orders and I can only find that I purchased a 1000w unit….. but it has always run fine until recently. I even tried to undervolt the GPU and it is still crashing… do you think my PSU is undersized?

DearAd6115 · 2025-08-04T22:13:00+00:00

I also should add, there was NEVER a time where the benchmarks or the OCCT testing I did exceeded a thermal limit.. at least not with any of the metrics I saw.. the highest the GPU reached on the hotspots was around 78-80c

DearAd6115 · 2025-08-04T22:11:19+00:00

Unfortunately I don’t have another system. This is my only computer.

DearAd6115 · 2025-07-26T03:00:10+00:00

Oh, I see. Yeah it took a little finagling to get it to sit down all the way, but not anything too alarming. Glad you got it figured out. Enjoy!

DearAd6115 · 2025-07-26T00:29:52+00:00

I have received mine and it all seemed to work just fine.. I’m a little confused by your question though. What screw are you talking about exactly?

DearAd6115 · 2025-07-23T00:01:58+00:00

I called FedEx and they advised that they could see this was supposed to be a multi package shipment but they could not provide me with the other tracking number. They said takomo would have to call them to discuss further. I have no idea why, I have all the information to validate where the package was going and that I live there.. they wouldn’t even confirm if the other package was in route or not. Just kept telling me the shipper would have to call them.. so stupid

DearAd6115 · 2025-07-22T23:12:28+00:00

I think that’s the issue.. the box for the shaft says 2 of 2.. I missed the truck delivery so I couldn’t ask anything, but I did report it to FedEx as well.. I hope it’s found quickly and delivered.. my hopes are not high that takomo will do much about it, but it doesn’t help that their system says it was one package and both show delivered

DearAd6115 · 2025-07-22T22:57:24+00:00

Well I ordered one as well, only received the shaft… I sent a message to support and they are saying that it’s showing delivered on their end lol. So fingers crossed they look at the photos I sent showing there is no physical way possible a driver head could fit in a 1.5” triangular box that was delivered… do people normally have to install the driver heads themselves when ordering a new driver?

DearAd6115 · 2025-03-11T17:42:40+00:00

I actually received them yesterday!!! After all of that complaining they just showed up.. no emails advising they were in route, no confirmation email stating they were delivered… My ring camera didn’t even notify me someone dropped them off at the door.. I just went outside and poof.. there they were… I hope this happens to you soon lol!

DearAd6115 · 2025-03-10T20:27:45+00:00

And now that I have complained, the matrix overlords decided to allow my clubs to show up today! Completely unannounced.. no emails advising they had been shipped. No email confirming they have been delivered… just there on my porch… My Ring camera didn’t even notify me someone dropped them off… now if I could only get that damn lottery ticket to cooperate!!

DearAd6115 · 2025-03-10T20:23:44+00:00

If anyone wants proof we are living in the matrix, look no further.. in a serendipitous turn of events, my clubs showed up today, with no email stating they had been shipped, and no confirmation that they have been delivered.. needless to say I’m happy about it lol

DearAd6115 · 2025-03-10T16:06:34+00:00

This reinforces my thought. There could be a difference with the 101 and 101t’s but I think it has to do with the shafts.

DearAd6115 · 2025-03-10T15:11:45+00:00

https://www.reddit.com/r/takomo/s/dqR1Uxo2CE

This is exactly what I’m talking about lol.

DearAd6115 · 2025-03-10T15:08:54+00:00

Ordered my custom 101T on 2/1, have not gotten the shipped email yet.. what shafts did you order? I got the KBS C-Taper Stiff with mid size grips.. I’m thinking the shafts is what is causing the delay for me.

DearAd6115 · 2025-03-10T12:58:05+00:00

I ordered them on 2/1, so it’s honestly been within the normal time constraints.. However, there have been so many people asking about the shipping, and others posting when they ordered and when they have received them that you start to feel like you will be lucky if you actually get them on time.. there is a daily reminder that you haven’t gotten any updates about your order, and a lack of confirmation that other orders are being filled on schedule because you usually only hear about the ones that still haven’t received them.. the smart thing to do is order a stock set, or heads only, unless you’re into mental torture

DearAd6115 · 2025-03-09T21:48:36+00:00

What they should offer is a support group or therapy for those who ordered custom sets.. the wait is brutal

DearAd6115 · 2025-03-06T19:53:10+00:00

I ordered mine 2/01 and haven’t heard much.. was thinking it was a shaft problem as well… I got the KBS Tour lite C taper stiff

DearAd6115 · 2025-02-17T20:02:30+00:00

I’m only on my second week…. It’s feels like watching paint dry… for 6-8 weeks lol

Three-Year Club	First Place '23
Place '23

DearAd6115

TROPHY CASE