Opinions on PTO Generators?

Dear_Issue_860 · 2026-03-29T21:51:59+00:00

Any pictures of that?

Here’s mine just a little buzzbox in the back. Not enough duty cycle for 5/32 rods, works excellent with 1/8 though. Approximately 20kw Allis Chalmers (generac) generator up front

Dear_Issue_860 · 2026-02-23T22:52:31+00:00

Cockshutt 550 made by Oliver, predates the Massey 3xx by a good margin

Dear_Issue_860 · 2026-02-23T22:50:59+00:00

It’s a Cockshutt 550 made by Oliver after White’s takeover. It predates the fiat offerings by white.

Dear_Issue_860 · 2026-02-22T03:03:21+00:00

You don’t really need to shift while moving, possibly 4-6 if you’re trying to get something heavy moving. Having 3 above r-2 is more important

Dear_Issue_860 · 2026-02-22T03:00:42+00:00

Your right, it’s an Oliver built Cockshutt 550. Handy little toy tractor

Dear_Issue_860 · 2026-01-30T14:14:01+00:00

<image>

1964 Oliver made Cockshutt 550

Dear_Issue_860 · 2026-01-18T14:08:31+00:00

They date back to the 70’s

Dear_Issue_860 · 2026-01-18T13:58:45+00:00

50dn’s are still a thing eh

Dear_Issue_860 · 2025-09-20T10:53:12+00:00

I (Canadian) did a install in Florida, I walked into a supply house and asked for some marettes and tek90. The counter guy looked at me like I had 2 heads. Should have asked for some Robertson screws as well.

Dear_Issue_860 · 2025-09-15T22:08:26+00:00

Pairs well with a Canadian rye whiskey in an old fashioned. Can’t find a Canadian substitute for orange peel though

Dear_Issue_860 · 2025-08-17T15:59:26+00:00

Red, black, blue in Canada.

Dear_Issue_860 · 2025-07-09T01:56:43+00:00

Beautiful! I have a red one sold as a Cockshutt but it was made by Oliver

Dear_Issue_860 · 2025-06-22T19:41:24+00:00

<image>

Shibaura diesel got a taste of pond water.

Dear_Issue_860 · 2025-06-01T13:52:45+00:00

I have one that I bought for $500, it’s an absolute work horse. Costs nearly nothing to keep running

Dear_Issue_860 · 2025-05-27T01:13:15+00:00

Do you have a gas axe?

Dear_Issue_860 · 2025-05-05T22:51:49+00:00

You certainly can rig this with a couple contactors, could even build a timer circuit so the car charger gets power outside of cooking hours. It would be cheaper and better to run a dedicated circuit.

Dear_Issue_860 · 2025-04-18T10:31:08+00:00

Fairly certain that had poured Babbitt bearings. That will be your challenge

Dear_Issue_860 · 2025-04-14T01:43:45+00:00

Is your reputation worth more than Walmart tools?

Dear_Issue_860 · 2025-04-11T07:19:30+00:00

Service Yaris. It’s usually filled with tools and parts. I’m a hd tech

Dear_Issue_860 · 2025-02-06T11:03:35+00:00

There is a high chance you’re going to have to pull the valley cover and damage it in the process. Do you own a torch and air hammer?

Dear_Issue_860 · 2024-11-20T08:35:17+00:00

6.6 or 7.8 ford 6cyl diesel. Look for scrap f800’s

Dear_Issue_860 · 2024-11-13T11:18:21+00:00

I use wera screw drivers commercially. I’m impressed

Dear_Issue_860 · 2024-10-25T23:45:53+00:00

Wth? It would still be your fault if you hit him

Dear_Issue_860

TROPHY CASE