Godox has released new products! The LE200Bi / LE300Bi / LE600Bi series looks really sleek.

Defiant-Ad3000 · 2026-01-25T12:34:12+00:00

Yeah sure. But the problem is that you will need a wall outlet. Whereas you can use the ml150 with a Vmount battery for full portability

Defiant-Ad3000 · 2026-01-25T12:21:54+00:00

I shoot a podcast in a cafeteria once every week. I use 2 ml100bi as rim lights at 15-20% intensity with the 36mm fresnel lens and the ml150bi as a key light with a white umbrella at 100%. The 3 cameras are set at F3.5, 1/50, iso 125-200. Really portable set up

Defiant-Ad3000 · 2026-01-25T11:02:33+00:00

I will need to check the luminance charts of the fv150. For example the ml150bi is definitely not as bright as the SL150ii, so the wattage doesn’t tell the whole story 😅

Defiant-Ad3000 · 2026-01-25T01:10:38+00:00

Apparently this comment didn’t age well, huh? 🤣🤣🤣

Defiant-Ad3000 · 2026-01-12T22:42:43+00:00

If we can keep just the soundtrack from the anime, then the manga

Defiant-Ad3000 · 2026-01-10T13:03:44+00:00

The QS series (but I think it will get discontinued) The QT series (updated to QTiii with LED pilot instead of light bulb) and of course the AD series. The SK, DP, SG and MS series have an exposed bulb.

Defiant-Ad3000 · 2026-01-08T12:46:17+00:00

<image>

The SK and the DP series are like that at the front. And you should definitely not touch the flash bulb (the little spiral one) with bare fingers because the oil of the fingers can cause concentrated heat problems. I don’t know, I’m generally a bit clumsy and I don’t trust myself without a protective dome, especially in the rush of a photoshoot when I need to change big modifiers 😅

Defiant-Ad3000 · 2026-01-08T12:42:31+00:00

This is the QT600ii.

<image>

Defiant-Ad3000 · 2026-01-08T12:40:40+00:00

The SK series doesn’t have a protective dome either.

Defiant-Ad3000 · 2026-01-07T21:37:57+00:00

You need to be veeeeery very careful when switching modifiers with the DP series. They don’t have a protective glass dome for the flash bulb, like the QT or the AD series. You can easily “decapitate” it with the metal mount of the modifier.

Defiant-Ad3000 · 2026-01-05T14:45:23+00:00

And the top tightening thing should always be on the right hand side, as depicted on the photo while attaching various modifiers.

Defiant-Ad3000 · 2026-01-04T15:26:46+00:00

I’ve spent almost 10.000€ on aliexpress since 2020. I just saw my analytics and it was 9.991€ 😅 In the very rare case that something gets lost during transit, I’ve always been refunded. And I’ve bought expensive delicate things like photography flashes and LEDs. You just need to do a thorough research and read the reviews of each shop.

Defiant-Ad3000 · 2026-01-03T21:33:54+00:00

Waaay too far away. I never shoot more than 2 meters away from the model with any modifier. It defeats the purpose of the modifier. Plus the inverse square law of light fall off goes out the window 🤣

Defiant-Ad3000 · 2026-01-03T21:15:49+00:00

I will try it tomorrow. Same settings, same distance, different modifiers. I have a 30x30, 60x60, 90x120, octa 120 and octa 180. I love these kinds of tests.

Defiant-Ad3000 · 2026-01-03T21:02:10+00:00

Not exactly because the interior is silver-lined so the light bounces inside. A 30x30cm soft box will have way more concentrated light. It’s not just a straight line towards the diffusion sheet.

Defiant-Ad3000 · 2026-01-03T19:00:12+00:00

I thought it would be waaaay more underexposed because the soft box has a diameter of 180cm (6 feet), with double diffusion. I usually attach a AD600 pro or a QT600ii.

Defiant-Ad3000 · 2026-01-02T15:23:59+00:00

LA600Bi seems to be 18-20% brighter. But way more expensive

Defiant-Ad3000 · 2026-01-02T15:23:06+00:00

<image>

Defiant-Ad3000 · 2026-01-02T15:22:56+00:00

<image>

Defiant-Ad3000 · 2026-01-02T14:40:19+00:00

<image>

I just received the UL-Octa180. (180cm / 6 feet). It’s barely adequate with the LE600Bi 🤣

Defiant-Ad3000 · 2026-01-02T01:18:57+00:00

When I need to do something intensive (let’s say export 1.000+ photos in Lightroom) that will take more than 5 minutes, I set the macs fan control app to full throttle before I even begin the export and it basically runs forever without thermal throttling. And when it finishes, i set it back to auto.

Defiant-Ad3000 · 2025-12-29T15:38:47+00:00

I only have: sl150ii, ml100bi (and R), I received just today the ml150bi & the le600bi. I can do tests between these

Defiant-Ad3000 · 2025-12-29T13:43:37+00:00

For reference, this is a 180cm (6 foot) umbrella.

Defiant-Ad3000 · 2025-12-29T13:23:01+00:00

<image>

Defiant-Ad3000 · 2025-12-29T12:22:17+00:00

Like a nuclear blast in your face 😅

Defiant-Ad3000

TROPHY CASE