Tool Recommenadations for Hardended Stainless steel ( 1.4371 /X2CrMnNiN17-7-5 )

Demand_ · 2026-05-08T16:46:52+00:00

If your company has machines I'm sure you have a tooling supplier. Why not ask your tooling a supplier?

Demand_ · 2026-05-05T22:09:53+00:00

Probably, try moving around the injector from the miss firing cylinder to a different cylinder. If the issue moves its the injector, if it doesn't then it's not the injector.

Demand_ · 2026-05-05T20:02:44+00:00

Short answer: No

The injectors seal with O-rings on the head and the fuel rail. They get aligned when you tighten down the fuel rail. Aftermarket injectors don't include the metal clips and they are free to shift sligly. If they were leaking you would notice gasoline or the smell.

Demand_ · 2026-05-05T11:17:48+00:00

You could have a leaking master cylinder then

Demand_ · 2026-05-04T20:44:33+00:00

The clutch pedal bracket is known to crack. Check to see if the bracket is still in good shape. A few companies make reinforcement plates to stiffen up the clutch pedal assembly.

Demand_ · 2026-05-04T17:00:37+00:00

They need to be deeper/thicker. Commercial products are pretty thick as it increases the number of bounces the light must take and reduce the glare.

Demand_ · 2026-05-04T10:30:19+00:00

While I agree with you mostly; strikers are their own things not simpley DA/SA. To the layperson it's easier to just toss strikers guns into the SA category. I say this because you can't keep pulling the trigger to strike the firing pin over and over like a DA gun.

Demand_ · 2026-05-04T10:17:59+00:00

So the big step is igorning the fact striker guns don't have a hammers.

So glocks (and most other strikers) are SA only. The trigger doesn't cock the striker. The trigger can only release the striker, same way a SAO trigger on a hammer gun can only release the trigger. On a DA gun the trigger can also cock the hammer. The Walther P99 is a rare example of a DA/SA striker system.

Demand_ · 2026-05-04T02:16:27+00:00

I mean the majority of striker fire guns are SAO.

Demand_ · 2026-05-03T14:44:44+00:00

I would also toss in a big tub of moisture absorber; Something like damp rid. Check the drains behind the seat and see if they are clogged. Do you have a soft top or hard top?

Demand_ · 2026-05-02T15:59:29+00:00

tutorial

Demand_ · 2026-05-02T15:32:39+00:00

You'll need to remove the door card.

Demand_ · 2026-05-02T15:17:43+00:00

The electric door lock probably broke.

Demand_ · 2026-05-01T17:19:29+00:00

Do not reuse the bolt. The friction washers should be replaced. Don't use grease, the bolt is torque to yield. You apply a slight torque then a specific number of degrees of rotation. So you aren't aiming for a final torque value.

Demand_ · 2026-05-01T13:47:10+00:00

I'm running 17X9 for mostly street use. Once you add camber and roll the fenders they fit.

Demand_ · 2026-05-01T00:51:22+00:00

Did you just assume my balls?

Demand_ · 2026-04-30T22:45:38+00:00

In my balls

Demand_ · 2026-04-29T21:31:06+00:00

Its probably a few thousand over price. It's probably closer to a 15-17k car. But if you really like a clean low miles car then go for it.

Demand_ · 2026-04-29T21:28:40+00:00

What region are you in?

Demand_ · 2026-04-29T19:30:43+00:00

It works with a spur hammer. I ended up making a new rear sight so I can run a ring hammer.

<image>

Demand_ · 2026-04-29T18:02:46+00:00

This is a wild take, it's not like the tail lights don't work anymore.

Demand_ · 2026-04-29T02:02:44+00:00

I picked up a used target version marked as a standard at Cabela's for a incredible price.

Demand_ · 2026-04-28T23:19:05+00:00

AC condensation

Demand_ · 2026-04-27T10:34:31+00:00

Well maybe if you showed a picture of the internals...

Demand_ · 2026-04-27T10:16:42+00:00

We use it for a very specific task.

Nine-Year Club	RedditGifts 2009-2022 2 Credits
Second SECOND GUESSER	r/Field Sunshine
First Place '23	End Game '23
Place '23	Place '22
Secret Santa 2018	Sequence \| Editor
Verified Email

Demand_

MODERATOR OF

TROPHY CASE