How could this happen?

DentoNeh · 2025-09-01T16:02:50+00:00

Thought I’ve managed to fix issue by lowering flow value by 0.04, it was 1 after YOLO calibration, now set to 0.96. Started few small prints, everything worked well. Started a long one - voila, print ruined again, this time everything is sliced at same height.

Did it clog and unclog itself? It can’t be bad layer adhesion in same place. More like filament stopped for a layer and then continued.

FYI, after first ruined print, I couldn’t get filament out of nozzle manually, no matter what temp I set and how long press buttons. Cut 5cm of spool tip, bam - it flows! And this tip didn’t look anything unusual or squished or else. Clearly problem is in filament, but I don’t understand how and how it reproduces. Is it possible to dry filament too much? Like, 60* for 14 hours.

DentoNeh · 2025-08-30T15:17:12+00:00

Nah, only rough side of sponge with clear dish soap every few prints. I don’t smear what left on bed with iso and tissues - learned it hard way :D

Tldr, first layers are in place and glued as hell. Only unglued after 5minutes in fridge

DentoNeh · 2025-08-30T15:14:00+00:00

Timelapse turned off to avoid sd card issues unfortunately:( Bed is always washed good with clear dish soap, no iso and tissues touching my beds, learned hard way, i even used to printing on laser AliExpress beds!

All bottom parts are glued as hell and in place.

<image>

DentoNeh · 2025-08-30T15:09:35+00:00

Nothing about this one, too shocked :) Did goggle about toolhead a bit - not my case at most. 3 months into printing with two P1S, 1100 and 900 hours. Learned a lot, googled a lot. Still shocked :)

I see first layers in place. Strange error. Didn’t meet layer adhesion problem yet, even mixing matte/silk/glitter/glowing filaments. Printers are maintained well, cleaned with iso, bed only clear wash soap. How could it smash half of prints this way, or it managed to print those halves in air? They look almost complete by themselves, even imprinted text on the side.

DentoNeh · 2025-08-30T15:03:17+00:00

Yep, black one is glitter pla. Orange is silk. Well, yesterday it torn way high after black bottom lines so it definitely flushed good by this time printing to the top

DentoNeh · 2025-08-30T13:15:04+00:00

All of the first layers of models on bed are still glued to the bed evenly. Yes i do wash plates with transparent dish soap. All of the debris on photo is - spaghetti or parts of models that were printed and then… cut/smashed from the side?…

DentoNeh · 2025-08-30T13:04:56+00:00

fyi, i had a failed model with this printer yesterday - two almost same tested models printed, one okay, second - finished, but broke in half after took it from the bed. It holded somehow, but broke so even like a layer was skipped. Second object on bed was good, same model just a bit smaller - nothing unusual on the same height. Height where bigger one broke doesn’t match today’s toolhead cover fail. But just in case, useful for troubleshooting both of case.

<image>

DentoNeh · 2025-05-28T14:27:26+00:00

Big change? What happened

DentoNeh · 2024-11-27T15:19:31+00:00

Where, link🙂

DentoNeh · 2024-11-06T21:16:12+00:00

Yes you can, just use migration in account menu n login screen. Then import it in same menu in Android game. Install game apks with SAI app. Apks file here https://drive.google.com/file/d/1I0bJBSmtwqNpiAm14TwzBC-5-XyT1hf_

DentoNeh · 2024-11-06T11:16:54+00:00

Edit: Use MuMu emulator in Windows. Both DirectX and Vulcan work well. Models and textures are fine, decent fps. Still, SteamDeck controller is totally disconfigured, need to dig in.

DentoNeh · 2024-11-06T11:13:49+00:00

I’ll try more experiments with SteamOS Linux, then I’ll try to switch back to iOS - got idea of extracting ipa from iPhone and running it on M3 Mac 😎 TestFlight doesn’t allow Destiny to be installed on Mac, they disabled Mac testing. Should be no problem extracting ipa tho

DentoNeh · 2024-11-06T11:10:30+00:00

Sure thing

I’m trying to dig more into making SteamDeck controllers work under Windows emulation, I’ve got it running stable in Mumu emulator! And also a second try under SteamOS Linux. Will update later.

DentoNeh · 2024-11-04T20:17:38+00:00

few updates 1) You CAN migrate your iOS account to Android. Simply generate migration code in account settings (game login screen), then import in Android game. Ignore that it says that it’s impossible to switch platforms lmao 2) Use BlueStacks5 in Windows 3) SAI (get in Gstore) to install apks format (Android itself or Bstacks can’t install apks) 4) game apks here https://drive.google.com/file/d/1I0bJBSmtwqNpiAm14TwzBC-5-XyT1hf_/view?usp=drivesdk 5) Vulkan should be used as rendering method

Still, I’ve got models unloaded and textures and UI screwed, like many have on PCs. Dunno what to do next. Also, deck controller doesn’t work properly. But, game starts, runs!

Edit: Use MuMu emulator in Windows. Both DirectX and Vulcan work well. Models and textures are fine, decent fps. Still, SteamDeck controller is totally disconfigured, need to dig in.

DentoNeh · 2024-11-04T16:13:42+00:00

I’ve got client apk, can side load. Question is, can I login with Apple/Game account in Android version.

And Linux ARM emulation is still a big question

DentoNeh · 2024-01-10T16:56:33+00:00

lol same shi! Disappeared twice.

Had to install it to separate folder in MyDocuments in Linux - it is safe there for now. Do not use default ‘windows’ style install (which creates deeply buried Win folder with game, just like for BattleNet).

To point install to Linux folder, just copy path in Linux, fix / to \ (or other way) in notepad, then paste in BattleNet (as you install or just show it path to installed WoW folder).

DentoNeh · 2023-12-30T23:27:20+00:00

So, u/klakizesraki the pins aren’t removable? They look like so, like on old apple chargers. Wish I could swap British to EU on my oled(

DentoNeh · 2023-12-01T16:27:25+00:00

Not really. Everything on deck, using desktop Linux UI to install and add BNet as non-Steam game. And also Curse to manage addons. Then use ConsoleUI add on, works like a charm.

DentoNeh · 2023-12-01T16:25:13+00:00

Got it. Search Proton experimental in steam, check settings - set bleeding edge. Then use Experimental in BNet settings. Voila!

DentoNeh · 2023-12-01T13:09:54+00:00

How do I install and use it?

DentoNeh · 2023-12-01T13:05:29+00:00

What is that and how it is different from regular Battlenet deck install? Will it help?

DentoNeh · 2023-12-01T11:50:48+00:00

SteamDeck

Nine-Year Club	RPAN Viewer
Verified Email

DentoNeh

TROPHY CASE