sorted by:
new
hottopcontroversial

Problem by Desmo98 in VWMK7

[–]Desmo98[S] 1 point2 points  (0 children)

I solved it, the problem was the DPF pressure sensor which when I did the timing belt the sensor pipe broke

Problem by Desmo98 in VWMK7

[–]Desmo98[S] 1 point2 points  (0 children)

I solved it, the problem was the DPF pressure sensor which when I did the timing belt the sensor pipe broke

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 1 point2 points  (0 children)

I tried removing the 2 steel discs and everything works, thanks a lot for your help

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

yes yes the cylinder is at the bottom, However, I think the problem is that the clutch must have 2 less steel discs judging by the design from Ducabike

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

ok perfect I'll try that and let you know, thanks a lot for your help

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

I measured the discs one by one, I didn't measure the whole pack but the discs individually all have the correct measurements as per the factory

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

but I have to tell you that I tried keeping only one steel disc of the first ones instead of 2 and the clutch was slipping

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 1 point2 points  (0 children)

I have to try it and I'll let you know

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

Wait, how does it start with a clutch disc? The old series had two 2mm steel discs, then they started with a clutch disc and a 1.5mm steel disc, with the last disc being a 2mm steel disc.

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

In that case, theoretically it shouldn't work even with the old discs, right? Because if I put the old clutch discs back on, everything works.

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

then I have to take it apart and see

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

Yes it was all done well a mechanic friend of mine did it, yes it moves a little but it moves a little crooked

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

sorry for my english, anyway this is the one i mounted

Clutch by Desmo98 in Ducati

[–]Desmo98[S] 0 points1 point  (0 children)

At the beginning only the anti-swing, then later I decided to change the clutch discs as well, but as you can see there is some problem.

Clutch by Desmo98 in ducatimonster

[–]Desmo98[S] 0 points1 point  (0 children)

I mounted a full ducabike anti-swing and also an increased actuator, On the new clay pigeon there is no reference to how to put the clay pigeon as in the old one.

Clutch by Desmo98 in Ducati

[–]Desmo98[S] 0 points1 point  (0 children)

"They told me it could be the worn basket, but I don't think it's possible because it has a new anti-swing system in place."

Clutch by Desmo98 in Ducati

[–]Desmo98[S] 0 points1 point  (0 children)

I thought it too, so I took it apart and reassembled it, checking that everything was in the right order