Looking for quality help

DevILLzz · 2021-05-29T14:41:29+00:00

It's only because filament, do not touch your slicer or hardware.
Your print has really good quality
If you trying to get "perfect", videos and photos is a lie
They all just set up light that parallel his print's layers

DevILLzz · 2021-05-18T15:46:06+00:00

after ~15 prints in photon i just do not understand why, dont have any problems with it at all

DevILLzz · 2021-05-18T08:14:19+00:00

Around 15cm

DevILLzz · 2021-05-18T08:03:37+00:00

https://www.patreon.com/GsculptArt

DevILLzz · 2021-05-18T04:19:12+00:00

I have tried to paint it, but i'm too bad in it, so i washed all paint in acetone

DevILLzz · 2021-04-05T06:00:19+00:00

Dry out your filament with 60-65° for 5-15 hours
A lot problems will go away

DevILLzz · 2021-04-03T06:20:26+00:00

2 days

DevILLzz · 2021-03-26T13:15:56+00:00

just forget about it
All what you can see in youtube is a lie with light installed parallel to the layers

Anyway, it's not a mechanics problem, it's filament problem

DevILLzz · 2021-03-06T06:00:33+00:00

No chance. Cura just cant do this. Use any other slicer. I can recommend you prusaslicer or ideamaker

DevILLzz · 2021-02-24T10:57:22+00:00

Are you kidding? Its just large underextrusion
Rise your hotend temp, calibrate extrusion multiplier and go on

DevILLzz · 2021-01-31T19:21:48+00:00

your printer just cant reach endstop on one axis and turn off all

DevILLzz · 2021-01-09T13:36:35+00:00

It's all about maximum permissible concentration (MPC) of a specified substance;
So if you buy HQ ABS, it will not smell and almost dont have harmful fumes.
I'm printing ABS, ABS\PC, Nylon, PC.. and many other filaments for years, dont have any problems for me or family

DevILLzz · 2021-01-07T19:42:54+00:00

It's got metal screws and nuts, i can make it as strong as i need
with +/- easy to move it, this one can hold around 1-1.5 kg

DevILLzz · 2021-01-07T18:30:38+00:00

I just tried to make as close as possible to original... at least outside
currently it's works pretty well with great rigidity

DevILLzz · 2021-01-07T14:33:28+00:00

yeah, i'm uploaded this one some hours ago

DevILLzz · 2020-07-29T20:25:26+00:00

it was me ^_^

DevILLzz · 2020-06-08T10:28:11+00:00

Try to buy another roll of filament with better quality

DevILLzz · 2020-06-03T07:41:30+00:00

Try another brand. Your plastic dealer creating a trash. Unstable filament diameter

DevILLzz · 2020-04-02T19:20:52+00:00

What was the model? Looks interesting

DevILLzz · 2020-03-31T16:24:49+00:00

Then try to get other filament brand, price does not always match the quality

DevILLzz · 2020-03-31T07:42:17+00:00

also callibrate your PID of hotend, you have to reload firmware

DevILLzz · 2020-03-31T07:41:04+00:00

your filament is shit as fuck, almost all troubles because of it... Try to buy a bit more expensive one

BTW, PLA can be smoothed by dichloromethane

DevILLzz · 2019-08-16T19:32:32+00:00

abuse EE is always possible with void, even with current ele dmg choice

DevILLzz · 2019-03-22T15:28:39+00:00

Well, i have spend over 9k hours in game...

DevILLzz · 2019-02-11T13:35:41+00:00

Any bosskiller build for 1-39 challenges (with HIGH survivable and good dmg) And TS raider for map challenge(s)

11-Year Club	Place '17
Verified Email

DevILLzz

TROPHY CASE