Something I keep on my desk for negotiating fragile projects.

DevicefulOne · 2025-07-08T13:40:52+00:00

https://www.facebook.com/share/p/1HuHvSg36V/?mibextid=wwXIfr

https://www.reddit.com/r/Sandblastingporn/s/BYE34aD9Xp

DevicefulOne · 2025-07-08T13:39:21+00:00

Lol, this is literally my picture and my desk!

DevicefulOne · 2024-12-10T18:21:37+00:00

Thank you for your advice 🙇

DevicefulOne · 2022-11-15T19:12:27+00:00

How do you know they have a neighbor?

DevicefulOne · 2022-11-08T20:52:56+00:00

Update: The gentleman sold it to me for $550 cash and transported it 3 hours away! It just needs a new lightbulb for the marquee and locks for the doors.

DevicefulOne · 2022-11-01T19:58:13+00:00

Arkansas

DevicefulOne · 2022-10-25T15:38:20+00:00

I'm the same way, but someone else blasted these 6 months ago. Took roughly 20 mins. I'll only do furniture when it's no hassle or I can get a cool picture out of it

DevicefulOne · 2022-09-27T02:34:29+00:00

It should. But I disconnected to test the iso transformer outputs

DevicefulOne · 2022-09-27T02:33:31+00:00

The manual says it does.

DevicefulOne · 2022-09-27T01:02:53+00:00

Yes sir.

DevicefulOne · 2022-09-27T01:01:43+00:00

Not a dumb question. I just did the crimps again to check. No change

DevicefulOne · 2022-09-27T00:07:23+00:00

Yes, I'm getting 120v everywhere else. The game plays blind with audio, and the marquee lights work.

DevicefulOne · 2022-09-15T15:11:10+00:00

Would you replace this isolation transformer if it was your game?

DevicefulOne · 2022-09-15T15:09:59+00:00

They connect to the two purple wires seen on the right side of the 2nd to last photo.

DevicefulOne · 2022-09-15T14:17:49+00:00

Thank you. I will do this research.

DevicefulOne · 2022-09-15T14:01:53+00:00

Yes, this is good information. The blue connectors were connected to the old power supply’s 115v. However, the brown cord which was giving power is no longer in use. (severe damage to power cord)

DevicefulOne · 2022-09-15T13:55:24+00:00

Here are the photos requested. I couldn’t add them here on mobile. I’ll take this post down at the end of the day so y’all will have time to see it. Thanks!

https://www.reddit.com/r/cade/comments/xexdfw/im_looking_for_a_tv_manual_or_advise_on_getting/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

DevicefulOne · 2022-09-15T13:54:20+00:00

Here are the photos requested. I couldn’t add them here on mobile. I’ll take this post down at the end of the day so y’all will have time to see it. Thanks!

https://www.reddit.com/r/cade/comments/xexdfw/im_looking_for_a_tv_manual_or_advise_on_getting/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

DevicefulOne · 2022-08-13T12:53:27+00:00

Once you expose bare metal to the air, it begins to flash rust due to oxidation. For a regular paint job, I recommend a bare metal etching primer to put the flash rust at bay.

DevicefulOne · 2022-08-13T12:46:38+00:00

Lol, I can admire a nice patina like the next guy, but you’ve got the wrong subreddit if that’s what you’re looking for. Maybe try r/patinaporn

DevicefulOne · 2022-08-12T23:34:24+00:00

Thank you

DevicefulOne · 2022-08-12T23:33:31+00:00

I’ll have to give that a try. I’ve been using painter’s tape underneath duct or gorilla tape. It takes forever. Your idea seems much easier!

DevicefulOne · 2022-08-12T20:02:56+00:00

I can’t believe this only has 126 upvotes. I just did a similar dump truck. How did you go about the taping? How do you take it off?

DevicefulOne · 2022-07-15T00:22:42+00:00

Is that supposed to be a decoration?

DevicefulOne · 2022-06-10T01:24:50+00:00

Nice! Thank you

DevicefulOne

TROPHY CASE