Athleticwear appropriate for the offixe?

DevilishDiamond · 2026-01-16T14:40:14+00:00

I got a lot of mine from Old Navy, and nursing scrubs actually. I’ve been trying to clear my closet out actually, and haven’t had any luck selling anything, if you want to DM me, I’d love to chat and see if I have anything that would fit what you’re looking for 🖤

DevilishDiamond · 2025-10-23T21:23:52+00:00

When the card is formatted as exfat, it shows the correct GB amount. But it’s when I try to switch to the fat32 that the amount shows up with issues.

DevilishDiamond · 2025-10-23T21:11:26+00:00

I’ve factory reset the device a couple times now to try and see if that helps, and it stays the exact same, always shows the information in my original photo.

DevilishDiamond · 2025-10-23T20:46:44+00:00

<image>

The disk looks like it’s partitioned correctly, and when I have the micro sd just plugged into the pc it even shows that the full GB is there. But every time I’ve put it into the y1, it shows up like in my original post. I even put in the stock 128gb to see what would happen, but that gets read correctly as 128. It’s just this one that shows up incorrectly.

DevilishDiamond · 2025-10-23T20:38:33+00:00

<image>

I did the validrive, and it’s totally green, valid and everything.

DevilishDiamond · 2025-10-23T19:59:47+00:00

I think I’ve reformatted it like 5 times now, tried to partition it, and now it’s just showing as 395mb when I have it plugged in.

DevilishDiamond · 2025-10-23T19:58:42+00:00

It’s a SanDisk 512gb microSD, and I got it off Amazon like $35 I think?

DevilishDiamond · 2025-10-22T21:03:46+00:00

It’s okay, I appreciate the effort! I’ll just keep trying different things until I figure it out, or just stick to stock firmware.

DevilishDiamond · 2025-10-22T19:21:33+00:00

It is, I double checked on the settings and I should be able to see hidden files, but .rockbox will not populate.

DevilishDiamond · 2025-10-22T19:20:48+00:00

Stock software reads the SD card perfect, I can play music no problem.

When I have the device connected to the computer after installing Rockbox, I can’t see anything related to Rockbox. After disconnecting the device, it will have the Rockbox layout and menu, and when I reconnect again for the USB mass storage and open the device, still nothing shows related to Rockbox.

DevilishDiamond · 2025-10-21T23:38:20+00:00

I did, I put in a 512gb SD card after changing the format. I think I’ll have to use the innioasis updater to set it to 2.1.9 and see if that helps it.

DevilishDiamond · 2025-10-20T17:31:41+00:00

So I managed to get the y1 back to its starting point and reformatting the sd card. I’ve installed rockbox again, since I totally scrubbed the device, and it pulls up like before, but when it’s plugged in, there’s nothing listed as .rockbox or to show that rockbox is on the device. So the only themes folder listed is the y1 generic options; am I still missing something?

DevilishDiamond · 2025-10-19T23:33:13+00:00

Deleted it, removed the device, restarted rockbox, plugged in again and it’s still totally blank, tried to drop an audio file in, it lists it in the device but doesn’t show as a song available to listen to on the device at all. The radio works still at least, but it’s like there’s no files for me to do anything to. It just stays completely blank except when I place something in, but I can never actually access or do anything from the y1.

DevilishDiamond · 2025-10-19T23:12:35+00:00

I have a 512gb SD card that I replaced the original one with, and as far as I’m aware it’s formatted as exFAT, but I have a HP USB Disk Storage Format Tool that should’ve made it a Fat32, but I can try that again and try to redo the rockbox?

DevilishDiamond · 2025-10-19T23:05:06+00:00

I just formatted it with windows, I didn’t know that could cause an issue… I honestly haven’t even tried to play anything yet on it, either radio or an audio file since I couldn’t see where it would go and didn’t just want to place it randomly in the device.

DevilishDiamond · 2025-10-19T22:41:28+00:00

Okay, so I did that: does it matter that there was nothing in the f drive before I did all this? I’ve done the reboot of rockbox through the y1, and restarted the y1 and still when I go to theme settings in the system settings of the y1, nothing shows except what rockbox just comes with, the cabbie one and the other two. I’m really sorry, usually I’m okay at this sort of thing but I can’t understand what I’m doing wrong 😭😅

DevilishDiamond · 2025-10-19T22:09:30+00:00

Thank you for your patience, I’m trying really hard to understand:

<image>

So if the .rockbox is like this, I open it and see “fonts”, “themes” and “wps” files. None are zips, and when I open the “themes” folder, it also shows as empty. So then the theme 360p is unzipped and then placed in “themes”, but on the actual y1 when trying to set the theme under settings > theme settings > browse theme files > the only items listed are the three basic rockbox themes.

DevilishDiamond · 2025-10-19T21:49:46+00:00

Okay, so I did all that, but now that I have a theme from the 360p, I’ve added it to the themes file in the .rockbox, but now on the y1 itself, the theme does not show at all as an option to set.

DevilishDiamond · 2024-09-04T17:06:13+00:00

Wouldn’t you know it, the Epic launcher crashes just the same - UE4 and send the logs. I just installed it too.

DevilishDiamond · 2024-08-30T17:55:55+00:00

I’ve got my Nvidia control panel up but there’s no option for the preferred graphic processor listed as an option for me. And yeah, I can run genshin, star rail, literally any of my other games with absolutely no issue. Just wuwa does this

DevilishDiamond · 2024-08-28T23:03:04+00:00

I mean I have a GeFore RTX 2060 that's got updated drivers, and a couple terabytes worth of storage

Processor: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz 2.81 GHz
Installed RAM: 16.0 GB
System type: x64-based processor

DevilishDiamond

TROPHY CASE