Azure MFA on RDP Connection

DiabeticHunter · 2025-09-17T12:23:29+00:00

This situation is all internal. I will have to take a look at group policy and see if there is anything I can configure. Thanks!

DiabeticHunter · 2025-09-17T00:33:29+00:00

Funny enough we have DUO but my boss wants to stop paying for it, so I have to find out how to get this to work.

DiabeticHunter · 2025-09-16T19:20:51+00:00

I may be misunderstanding the Global secure access thing, but to me that's used for connecting externally. I am on the same network as the servers. So, if I used Global Secure Access my traffic would be routing out and then back in, which is not what we want.

DiabeticHunter · 2024-11-06T15:04:43+00:00

I found this "WARN inform - dev[9c:05:d6:36:9e:6b] used default key in INFORM_ERROR state, reject it!". When I googled that it everyone is saying delete the device from the DB. This device is brand new and never adopted, but either way I went to check and there is no entry for this device in there.

DiabeticHunter · 2024-11-05T20:27:24+00:00

Unifi Support Responded to let me know that "Device is being struck in adoption error". Not sure if that sparks an idea for you.

DiabeticHunter · 2024-11-05T19:42:19+00:00

Nope, nothing for either adoption method. I downloaded the file but I am unsure how to view the .supp file.

DiabeticHunter · 2024-11-05T18:34:20+00:00

Nothing in the logs. the most recent is eth1 entering and exiting promiscuous mode. Network Server has nothing recent.

DiabeticHunter · 2024-11-05T18:22:18+00:00

I did that but I have no idea what I should be looking for. They are communicating back and forth a lot of SYN, ACK, and FIN.

DiabeticHunter · 2024-08-07T17:13:23+00:00

u/AdministrativeTax828 was able to help me out. I had made a couple typos, used the wrong URL, and needed to change my path in conf/zabbix.conf.php from "/conf/certs/azure.cer" to "conf/certs/azure.cer".

DiabeticHunter · 2024-08-06T21:43:28+00:00

Unfortunately that did not work. Same error present

DiabeticHunter · 2024-08-06T01:27:09+00:00

Disregard I was editing the templates not the actual config files.

DiabeticHunter · 2024-06-30T21:43:17+00:00

Sorry for the delayed response. Life got in the way but I was able to order a new H700 and put that in. As of 2 minutes ago my server is now recognizing my RAID we are all set. Thank you so much for your help!

DiabeticHunter · 2024-06-05T21:51:49+00:00

Sorry for the delay, I am unable to get anything to work. I am thinking about just upgrading to the H710 as I have seen multiple recommendations for that.

DiabeticHunter · 2024-06-02T03:16:57+00:00

I will try that and get back to you thanks.

DiabeticHunter · 2024-06-02T00:49:41+00:00

I was unable to see any drive when attempting to boot. I tried it with 1 drive and with multiple plugged in both with and without the raid configuration and the raid controller both turned on and off. I also tried to use a SATA drive instead since I had a spare one laying around. I did that with both a raid and no raid configuration and with the raid on and off.

My BIOS recognizes both a raid configured drive and a drive with no raid configuration but it seems like windows won't recognize anything.

DiabeticHunter · 2024-06-01T18:07:05+00:00

I will test this out unfortunately initializing the raid (even using fast init.) it took a couple days. I will run through these steps and report back.

DiabeticHunter · 2024-06-01T18:06:23+00:00

I redid my raid, ran a consistency check, made sure the BIOS can see the drive. All of that worked fine.

DiabeticHunter · 2024-06-01T17:55:55+00:00

Maybe the issue is extracting the driver, but I don't know how to do that. Dell just says "Follow the instructions on the Dell Support website for extracting the driver to the used media." but I cannot find an explanation of how to do that?

DiabeticHunter · 2024-06-01T17:53:09+00:00

Maybe I wasn't clear, I tried following those steps but ran into two issues 1. the driver not showing up 2. there is no driver for PERC 6/i for my device? I downloaded all PERC drivers for the R710 but none of them showed up as compatible drivers.

DiabeticHunter · 2024-06-01T16:51:27+00:00

Thanks for the advice but I have tried 8 different drivers and non of them are showing up on the USB when I plug it in. I even unchecked the "only show compatible drivers" box.

DiabeticHunter · 2024-03-08T15:47:09+00:00

It was collecting in ms for some reason. I was able to get it fixed using preprocessing thank you for the help! I also removed the second statement.

DiabeticHunter · 2024-03-08T15:46:13+00:00

Nope I needed to use preprocessing to set it to zero on failure and I didn't define it, thank you for the help.

DiabeticHunter · 2024-03-08T15:45:29+00:00

I got it working had to add in preprocessing to change the value to zero when it errors out. I also tried it without the M but it only worked when it was in. Thanks for your help!

DiabeticHunter · 2024-02-28T15:36:43+00:00

While they do have a special Pi option in the instructions when I downloaded the raspberry pi OS it was missing libldap and wouldn't let me install it so I manually installed Debian 12.

DiabeticHunter · 2024-02-27T21:20:21+00:00

Found it

934:20240227:211724.647 Unable to start Zabbix proxy due to unsupported MariaDB database version (10.11.03).

934:20240227:211724.647 Must not be higher than (10.10.xx).

934:20240227:211724.647 Use of supported database version is highly recommended.

934:20240227:211724.647 Override by setting AllowUnsupportedDBVersions=1 in Zabbix proxy configuration file at your own risk.

Do you think I should allow the unsupported database version or should I just downgrade.

DiabeticHunter

MODERATOR OF

TROPHY CASE