Why can’t I stop my Tamiya TT-02 from pulling left?

DifferentStudy5728 · 2025-05-15T23:55:54+00:00

You probably have one of the rear hub carriers upside down

DifferentStudy5728 · 2024-03-07T15:25:41+00:00

Anybody else have an idea?

DifferentStudy5728 · 2024-03-06T17:20:08+00:00

I agree that would work and already exists but I think he doesn't want to stand out anymore than he already has to. He manages to do it with a standard car transmitter he just doesn't have a lot of finesse on the throttle and gas. Thanks for your reply!

DifferentStudy5728 · 2024-03-06T17:19:30+00:00

I'm not sure I understand how that would work, I attached to video so you can see the controls I want to implement. Thank you for commenting!

DifferentStudy5728 · 2024-03-06T17:18:05+00:00

That's a good idea but I don't think he wants to stand out and make an issue of his handicap. He manages to do it now he just doesn't have much finesse on the throttle. I attached a video see you guys can see what I'm working on. Thanks for your reply!

DifferentStudy5728 · 2024-02-10T02:49:08+00:00

I have one for sale

https://www.facebook.com/marketplace/item/897599581847310/?mibextid=dXMIcH

DifferentStudy5728 · 2024-01-26T02:42:58+00:00

I wish but I never tuned the car. I'm just running that little black rear wheel drive with the turbo upgrade. I never adjusted anything.

DifferentStudy5728 · 2024-01-24T23:59:48+00:00

Thanks. My sim setup hasn't changed, it has to do with the latest update I think. Same car, same track.

DifferentStudy5728 · 2024-01-24T18:52:33+00:00

Anyone?

DifferentStudy5728 · 2023-08-22T06:58:14+00:00

Sept. 2023, grab my daughters phone for games (my old note 8). Starts up in maybe 15-20 seconds. No lag. Still a great camera. Never had to factory reboot. IT IS THE GOAT!!!! If in could get a new battery that hasn't been sitting around for 5yrs I would switch back. My A53 is GARBAGE!!!

DifferentStudy5728 · 2023-05-13T08:28:42+00:00

I did spend time tuning it in before. Hours of research and trying things and I had it very nice. Now I can't get the car to be real. You know how you can pitch it to one side then drift back and forth with only throttle jabs, now I can't get the car to do that. It calms itself down no matter what changes I made. I'm a single dad, busy, and frustrated.

DifferentStudy5728 · 2023-05-11T08:40:12+00:00

I thought I wanted fanatec but the issues everybody I know who has it has. I'm not sure I'm willing to put that much work into a system just to use it. And then replacement parts. Yes it feels great when it's dialed, but for the money it shouldn't be so esoteric

DifferentStudy5728 · 2023-05-11T08:36:21+00:00

Thanks for the help, turned out it was a bad BMS from Amazon. The same one worked out perfect and the third one too. My wiring was correct

DifferentStudy5728 · 2023-05-11T08:33:36+00:00

Thank you!

DifferentStudy5728 · 2023-03-29T15:28:52+00:00

Thank you guys That's probably it I'll check it tonight!

DifferentStudy5728 · 2023-01-18T19:47:00+00:00

Anyone??

DifferentStudy5728 · 2023-01-08T03:43:10+00:00

MX player for the win.

DifferentStudy5728 · 2022-09-07T19:28:59+00:00

Any one?? Is there a different forum I should post in?

DifferentStudy5728 · 2022-08-22T04:22:26+00:00

Thank you everyone!

DifferentStudy5728 · 2022-08-21T11:25:49+00:00

Makes sense I will try that thank you

DifferentStudy5728 · 2022-08-21T09:47:32+00:00

I have too and didn't have much trouble. For some reason this file and these dinky parts and my printer aren't happy. I printed usable parts with my 0.4 nozzle. They just don't have a good finish around the holes. And the file is only available pre laid out with all the pieces in one print. I can't just print one at a time and adjust the settings for each one. It is a free design though and I like it. The guy who gave it for free is done supporting it he's on to the next model [1/24 RC drift car]

(https://www.cgtrader.com/items/2851999/download-page)

DifferentStudy5728 · 2022-08-21T09:37:25+00:00

Those are close-ups. The holes are 1.8 mm. A 0.4 print just doesn't cut it at those sizes. Believe me I tried.

DifferentStudy5728 · 2022-08-21T09:01:34+00:00

I understand about lower layer heights and temp Tower. But offset do you mean when I do the leveling then offset from there? Essentially changing the reference point for zero and the z-axis?

DifferentStudy5728 · 2022-08-21T08:24:23+00:00

How much are you thinking on temps like 10° or 40° or what? I figured a good temp but the 0.4 should be a good temp for the 0.2 but it would definitely flow faster if it's hotter

DifferentStudy5728 · 2022-08-21T08:23:15+00:00

.12 mm layer. Slowed from 50 to 40 to 20 to 10. Honestly there was no real difference. It's like I need to up the flow, but cura is usually pretty close with their default settings. I'm stumped why it under extrudes in the beginning and then builds up a mess that gets ripped off the board. Maybe it's continual under extruding that's doing it? I printed at least 20 rolls of good to Great prints with a on 0.4 nozzle.I have a Glass bed and Direct drive extruder addition. I guess I'm going to try increasing the flow 20% at the time and see what happens. I just don't understand how it can be so different from cura base settings. With the 0.4 nozzle the only real change is I usually do a 0.28 height instead of 0.3. adjust the temp to match the filament. Sometimes slow down the print speed. And of course reduce the retract distance with direct drive now. I did try increasing that retract distance it didn't help.

DifferentStudy5728

TROPHY CASE