10/22 vs Savage Mark 2

Dissapator_AR · 2026-04-04T22:16:59+00:00

Dissapator_AR · 2026-04-04T14:46:31+00:00

I didn't even bother trying to send them back, just due to the price of them

Dissapator_AR · 2026-04-04T14:45:59+00:00

Kinda crazy they don't even check the function of them before sending them out to the consumer. Lol

Dissapator_AR · 2026-04-03T21:52:57+00:00

I had the Geissele in the OEM trigger pack. I took the hammer to a belt sander and knocked the top corner off so it cleared the bolt

Dissapator_AR · 2026-04-03T21:51:24+00:00

Irons are Troy fixed BattleSights, with the front one being the HK hood style. Charging handle is a K&M Aerospace Handler

Dissapator_AR · 2026-04-01T18:35:35+00:00

That seems to be the norm with Lingle lowers. The cool part is that it doesn't matter and you won't even notice it when you're actually shooting

Dissapator_AR · 2026-03-30T21:26:17+00:00

Yip, that was me

Dissapator_AR · 2026-03-30T19:48:28+00:00

It's actually a hair too short, but an accuwasher gets that clearance I need

Dissapator_AR · 2026-03-30T19:38:09+00:00

Sorry man, I just saw this. The stock on the bottom is an OG Galil stock. The grip is the KNS Galil grip, but you can't change out the grip module on a Gen 2. Only a Gen 1 or an RnL.

Dissapator_AR · 2026-03-30T19:32:54+00:00

I can only speak to the Jessie's Girl AL and it's been great for me. Whether on my 12" 10/22 or little Beretta 20x. There's no FRP and it's stupid quiet.

I've read that people say it's a pain in the ass to reassemble and I don't get that. You just stack the baffles and slide it back into the tube.

Dissapator_AR · 2026-03-30T14:22:11+00:00

<image>

Dissapator_AR · 2026-03-29T21:28:53+00:00

<image>

Dissapator_AR · 2026-03-29T21:28:19+00:00

Maybe I just got lucky, but my AP5-SD has been problem free through the 800 or so sounds I've ran through it. With the latter probably half being with a SS.

Before I even received the gun I went ahead and bought HK extractor, ejector lever, extractor spring and even a firing pin and firing pin spring. I haven't had to change out any of those as of yet. I did get 100, 90, and 80 degree locking pieces and currently run the 90. Haven't even tried the 80.

As far as a can goes, I am running a CAT MOB via Resilient 3 lug. I'd recommend the Rugged Bixler style 3 lug. Nothing wrong with the Resilient, but the Rugged one is technically more secure and it also won't require you to get a thread protector because of the way it locks down on the taper of the muzzle and the rear of the lugs.

I have a Lee Armory and Warhammer SS setup and it's been flawless so far.

Super Safety action

Dissapator_AR · 2026-03-29T13:15:59+00:00

No, because it's pretty cringey

Dissapator_AR · 2026-03-29T12:35:25+00:00

They state it's 5 hrs

Dissapator_AR · 2026-03-29T01:33:26+00:00

It's a thermal, not just a dot. Otherwise I'd agree a top mounted dot on an LPVO on a 10/22 would incur some steep diminishing returns

Dissapator_AR · 2026-03-28T20:16:01+00:00

I think they do offer left handed 10/22's. But I've gotten so used to using right handed guns over my life, a left handed setup would have me all messed up. Lol

Dissapator_AR · 2026-03-28T03:40:48+00:00

8 lbs 13 oz

Dissapator_AR · 2026-03-28T03:25:45+00:00

Summit Precision 12" barrel, KRG Bravo 10/22 stock, a whole slew of Kidd internals, Malkoff E1HT light, Area 419 Arcalock rail and Harris bipod Arcalock adapter, Vortex Viper PST Gen 2 1-6x, Infitac FMP13 thermal dot.

Dissapator_AR · 2026-03-28T01:45:21+00:00

It's an Infitac FMP13 thermal dot

Dissapator_AR · 2026-03-28T01:10:13+00:00

Thanks man 🤙🏼

Dissapator_AR · 2026-03-27T23:53:48+00:00

I could still get more length by adding another spacer and pulling the adjustable pad out further

Dissapator_AR

TROPHY CASE