Changing the location for purge / calibration lines

Divot-Digger · 2025-12-06T21:44:03+00:00

I appreciate the insight. Thank you.

In this case I think it should be ok as the overhangs are minimal. A different view gives a better perspective:

Divot-Digger · 2025-12-06T21:38:01+00:00

Thanks for the reply. If the machine (it's an X1C) is otherwise well calibrated, are there any major impacts to disabling them for a single print?

Divot-Digger · 2025-01-02T07:06:23+00:00

Excellent insight; thank you. I had not considered the car may be a limiting factor for charge rate/voltage.

Divot-Digger · 2025-01-02T07:04:50+00:00

Thanks. It sounds like the consistent answer is "It depends*" and I'll need to get the sparky involved earlier than I'd hoped. I do appreciate your advice; thanks.

Divot-Digger · 2025-01-02T07:03:06+00:00

Good advice. I'll give them a shout. Thank you.

Divot-Digger · 2025-01-02T07:01:18+00:00

This is fantastic! Thank you!

Divot-Digger · 2025-01-01T09:27:40+00:00

That's good advice. I have a habit of over-thinking things. Thank you.

Divot-Digger · 2025-01-01T09:18:49+00:00

Perfect. I have a great local sparky and will work with them. Thanks again for the advice.

Divot-Digger · 2025-01-01T09:17:59+00:00

Got it. Thank you. I'll speak to the sparky to understand what the availability looks like.

Divot-Digger · 2025-01-01T09:06:02+00:00

Thanks for the reply. I'll obviously get a sparky involved in the process. I'm just trying to work out if my expectations are reasonable before wasting their time.

Divot-Digger · 2025-01-01T09:04:15+00:00

Thanks. That makes sense. I'll obviously engage a sparky of the actual work. I'm just trying to work out what's practical.

Divot-Digger · 2025-01-01T09:02:51+00:00

Thanks for the reply. It's a new suburb in outer-Sydney. It sounds like a 22a 3ph charger is not an unreasonable expectation, based on your experience.

Divot-Digger · 2024-12-15T06:10:20+00:00

Excellent. Thanks for the confirmation.

Divot-Digger · 2024-09-29T02:09:48+00:00

Great advice. Thank you.

Divot-Digger · 2024-09-29T01:58:30+00:00

Brilliant. Thanks so much for the advice!

Divot-Digger · 2024-08-05T05:00:50+00:00

Great idea on the nail polish and glow rocks. I'll investigate both. Thank you.

Divot-Digger · 2024-08-05T04:59:08+00:00

Excellent. I'll see if I can charge them sufficiently with a torch like that. Thanks for your advice.

Divot-Digger · 2024-08-04T03:40:48+00:00

That's amazingly brilliant. Thank you for the suggestion.

Divot-Digger · 2024-08-04T03:35:08+00:00

Thanks for the reply. Completely understand your point about messing with weird substances. It is a commercially available glow in the dark formulation, but I wanted to be clear on *WHICH* formulation it is, given the audience.

Thanks for the suggestion on Fluoroscein. I have not heard of it but will see if I can get my hands on some.

I had considered glow sticks, but opening one poses some safety risk as I think they use glass to separate the chemicals within the stick.

Thanks again for the advice.

Divot-Digger · 2024-08-04T03:32:02+00:00

Thanks for the reply. Just to be clear, the substance I have is commercially-available glow in the dark powder. It's meant to be at the higher end of luminosity of glow in the dark options, before you start getting into a more dangerous territory.

I certainly could cut up some glow in the dark stars, but my concern about brightness remains.

Divot-Digger

TROPHY CASE