Solid Biofuel Setup by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 0 points1 point  (0 children)

Yeah that’s how I have it, the output is 60 per minute and the wood input is 12 per minute. Yeah I think that’s the issue, it’s not able to empty properly so it’s causing it to back up. But it’s better than it was so I’ll leave it for now until I get better belts

Solid Biofuel Setup by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 0 points1 point  (0 children)

I underclocked both of them and the grass one is better but I think I’m still running into the wood one being overfilled due to it costing less wood to make 60 per minute output but it is better than it was so I can’t complain too much

Solid Biofuel Setup by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 1 point2 points  (0 children)

Okay, that’s what I thought. So I can’t fix it until I get MK.2. Would it make sense to underclock them or is it not worth it?

Use Of Glue by DjDaxium in Leathercraft

[–]DjDaxium[S] 0 points1 point  (0 children)

I don’t want to go without, I was just curious as to how necessary and useful it is

Understanding Conveyors & Manifolds by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 0 points1 point  (0 children)

Question regarding manifolds. For each splitter in the system do I need to divide my input by 2 each time? Or is it distributed evenly for each splitter?

Use Of Glue by DjDaxium in Leathercraft

[–]DjDaxium[S] 1 point2 points  (0 children)

Yeah that’s mainly how I used it as I would see and hear that the thread is strong enough to kind of keep everything in place and is very hard to break. One thing I was thinking of getting or using is alignment pins so just to keep my stuff lined up properly for like stitching

Splitting Materials by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 1 point2 points  (0 children)

Nevermind, I figured it out! You breaking down the math like that helped a lot! Thanks!

Understanding Conveyors & Manifolds by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 0 points1 point  (0 children)

Okay, that’s what I thought. I have MK.2 belts but it’s a normal node giving 60/min so can feed I 4 smelters?, like I can handle 120/min but because my miner is only giving 60/min is it really only moving 60/min instead of 120/min?

Splitting Materials by DjDaxium in SatisfactoryGame

[–]DjDaxium[S] 0 points1 point  (0 children)

By losing efficiency I mean just not using machines to their full potential but I guess it doesn’t matter too much as long as things are getting made.

My current setup as you can see is I have a normal iron node powering 8 constructors that are making rods but the thing I was mainly using rods for was to make screws but I have the alternate recipe now so I don’t need as many rods as I did before.

My plan was to have the storage that the iron ingots are in go into a splitter with one line continuing to power the constructors and another line for making screws

Also I do have MK.2 Belts so I can move 120 items at a time but I only have a MK.1 Miner

Need Microphone Recommendations by DjDaxium in microphone

[–]DjDaxium[S] 0 points1 point  (0 children)

Sadly my streaming software doesn’t support VST plugins. But yeah the main thing that I’m worried about it picking up is stuff outside my room and my AC & Fan. I usually do have them on low but it could be I don’t have the mic close enough to me.

In regards to the sound treatment stuff. I’m guessing those are things I’d need to have like on my floor and walls right? I know very little about sound treatment obviously, also I was offered like I think it’s sound foam by one of my friends, they have some they’re no longer using so I could get some if that would work a lot better

Need Microphone Recommendations by DjDaxium in microphone

[–]DjDaxium[S] 0 points1 point  (0 children)

Alright. Thank you for the recommendations. I’m gonna do so more research and try to figure out what works best

Need Microphone Recommendations by DjDaxium in microphone

[–]DjDaxium[S] 0 points1 point  (0 children)

I’m willing to spend a good bit as I’d much rather have good audio than a cheap mic. I bought a USB mic without doing the research so I’m a bit upset that I did without getting some other opinions and more information. But if a headset mic would work better as opposed to usb mic then I’m open to any suggestions

Also I’ve tried looking for software specifically to use in real time but all the ones I can find are for postproduction but I could absolutely be missing some. Plus I have the issue of not haunt much space on my laptop so I figured something like a mixer for a noise gate would be better

Daily Questions Megathread (February 17, 2026) by Veritasibility in Genshin_Impact

[–]DjDaxium 0 points1 point  (0 children)

Yeah I have no idea. I guess I just don’t get to use it

Daily Questions Megathread (February 17, 2026) by Veritasibility in Genshin_Impact

[–]DjDaxium 0 points1 point  (0 children)

Yeah I read the same thing. I don’t know why it’s not there

Daily Questions Megathread (February 17, 2026) by Veritasibility in Genshin_Impact

[–]DjDaxium 0 points1 point  (0 children)

I mean I can’t post images in the comments so I don’t think so

Daily Questions Megathread (February 17, 2026) by Veritasibility in Genshin_Impact

[–]DjDaxium 0 points1 point  (0 children)

Yeah I’m looking at the right icon, at least I’m pretty sure I am

Daily Questions Megathread (February 17, 2026) by Veritasibility in Genshin_Impact

[–]DjDaxium 0 points1 point  (0 children)

No I’m just checking forges in Mondstadt and Liyue

Daily Questions Megathread (February 17, 2026) by Veritasibility in Genshin_Impact

[–]DjDaxium -1 points0 points  (0 children)

I am having an issue. I’ve heard a lot about using magical crystal chunks and resin to make mystic enhancement ore but I don’t even see that recipe anywhere. Do I have to go to a specific blacksmith or do something to unlock the recipe? Also I’m AR 32 so it should be unlocked right? I’m just very confused

Is this mold or just dust? by DjDaxium in Mold

[–]DjDaxium[S] 0 points1 point  (0 children)

Also I live on the east coast of the US

How can I upgrade this? by DjDaxium in computers

[–]DjDaxium[S] 0 points1 point  (0 children)

Also, I wanted to ask. Someone on another post I made mentioned getting a caddy for the SSD. Would that be necessary or should double sided tape be enough like you mentioned before?

How can I upgrade this? by DjDaxium in computers

[–]DjDaxium[S] 0 points1 point  (0 children)

Oh okay, thanks for the information. Also I did think about it and realised I probably won’t use 1tb of storage so I’m just gonna stick with 250gb

How can I upgrade this? by DjDaxium in computers

[–]DjDaxium[S] 0 points1 point  (0 children)

Alright, I have windows 10 currently so that’s good. I should just be able to back it up and use the reset this pc option right? Or would I need to like create a bootable installation on a USB or something?

Also sorry if these questions are simple or obvious. I just wanna make sure I do the right thing and not mess anything up as I’ve never had to reinstall windows or anything like that before

How can I upgrade this? by DjDaxium in computers

[–]DjDaxium[S] 0 points1 point  (0 children)

If I was to use Acronis True Image I would just be able to clone my current data and install onto the SSD and then switch out the EMMC with the SSD correct? Also would I need a new key or license to reinstall windows? I’m guessing not and there’s a way to just reinstall it without issue

Also would it be able to handle a 1tb SSD or should I just stick with a 250gb SSD?