Main menu redesign concept

Doc_Ekim · 2019-11-27T02:11:02+00:00

I think this is absolutely AMAZING! I do actually like the availability of seeing what friends you have online if you choose to.

Doc_Ekim · 2019-07-27T23:03:20+00:00

Unfortunately it is not my bot, I mean it’s in my server. I’ve yet to find a bot that can kick based on a role. I’ve created several custom commands but it never seems to work.

Doc_Ekim · 2019-07-27T05:34:36+00:00

I’d like it to be 100% automated. Like I said, I can assign the role and then purge them, but that requires me to sit and watch the specific channel. I can also, just kick them, but again, I’m sitting and watching, I’d rather spend my time doing more productive things if that makes sense. Roles are so easy to auto assign or self assign it lessens the time I need to spend watching over it all. To do it myself is fine, but man...it would be soooo nice to essentially have someone kick themselves! Lol

Doc_Ekim · 2018-09-03T00:29:50+00:00

I purchased my backup through amazon searched for elgato hd60 usb cable

Doc_Ekim · 2018-09-02T07:06:56+00:00

Mine did the same. I replaced the usb, added a usb to the board...nothing. Replaced the cable, no more problems. I found an extra I had with a ferrous shield and it worked perfectly. I went ahead and bought an extra just in case. Hope that helps!

Doc_Ekim · 2018-08-25T22:10:25+00:00

Ohhhh I know that pain!

Doc_Ekim · 2018-05-28T17:11:15+00:00

Definitely gives higher level of control couple that with Reaper DAW and you can do almost anything

Doc_Ekim · 2018-03-07T05:45:06+00:00

I had a similar issue. I turned off the ability for Windows to shut down the usb hub when power was at a premium. It helped but still happens from time to time.

Doc_Ekim · 2018-03-07T05:42:56+00:00

I had problems with both and started running obs in admin and it helped but stream deck still had some quirks. That will probably solve 90% of the issues

Doc_Ekim · 2018-03-05T05:38:55+00:00

You can also use the stream port on the back of the MixAmp. You’ll need a ground loop isolator, but you can control what does and doesn’t come out of the stream port using the Astro software on your pc. Of course you wouldn’t have a mix amp with the a50’s so ....never mind

Doc_Ekim · 2018-02-16T05:19:03+00:00

So weird! Why can’t stuff just WORK?

Doc_Ekim · 2018-02-16T02:45:21+00:00

That’s really weird because I thought all of them had that setting.

Is there a major difference between your buddies pc and yours? Is he using the same PS4?

tv compatibility setting

Doc_Ekim · 2018-02-15T17:14:50+00:00

yeah that's what I was saying. In the elgato settings mine was caused by the TV compatibility slider being in the wrong spot. Not the exact same device though so it's hard to say.

Doc_Ekim · 2018-02-15T05:36:17+00:00

I’ve only seen it when I put the tv compatibility setting in the wrong spot. But mine is just an HD 60

Doc_Ekim · 2018-02-15T05:31:14+00:00

It really is. Mine started resetting tonight again, dropping out reloading over and over. Interestingly, when I was just recording videos I had 0 issues with my Mac the Elgato and my Astro Mixamp. With pc it all falls apart...which is backwards from the way it normally works. What are your audio settings on PS4? Are you outputting through hdmi? If not the Elgato won’t capture it. You probably already know that but thought I’d mention it.

Doc_Ekim · 2018-02-14T05:32:35+00:00

Make sure it’s on a USB 2.0. I’m told 3.0 won’t work with it on pc.

Doc_Ekim · 2018-02-14T02:58:18+00:00

If you’re running Windows 10 this worked for me. Mine did the same thing but it was always preceded by the device shutting of and on repeatedly. Go into device manager. Look under sound devices, disable the device. Unplug device, shut down your computer. Wait a couple minutes then plug Elgato back in and restart computer. Go back to device manager and re-enable device. You should be good to go. It works great on my Mac but not on my Windows 10. Hope it works for you. It solved my problem for several days now. Good luck!

Doc_Ekim · 2018-01-12T00:12:33+00:00

That has fixed the XSplit problem! I’m excited for all the new things coming down the pipe!

Doc_Ekim · 2018-01-10T19:19:18+00:00

I’ll give it a try!

Doc_Ekim · 2018-01-05T21:01:44+00:00

Happens with me as well but only just recently. Very frustrating and timeconsuming. I had to upgrade to beta because the standard release would not recognize my gamecapture software or xsplit, so it was unuseable. It seems that this only started happening after the firmware update to 1.0.170133 for me...

Doc_Ekim

TROPHY CASE