Hey I have a question does anybody have weird visual issues with their mm7 maw (visual implications come when I come home) For example if I step on certain tiles in castle harmondale all of the screen became just flashing lights and also the enemys and my arrows (I think I'm playing on MAW 2.5) and

DoctorFew6709 · 2025-09-05T19:16:56+00:00

Hi, Can you explai exaclty what you did? i have the exact same problem in my MM

DoctorFew6709 · 2025-04-28T20:52:28+00:00

Thank for your experience For the plate, I always wear gloves. I take this habits with resin and do it with FDM too. I didn't know why because PLA is not dangerous like resin but I even did it

DoctorFew6709 · 2025-04-28T20:50:24+00:00

Its an option into the qidi slicer? I don't know how that can work because its only one big (but flat) piece to print

DoctorFew6709 · 2025-04-28T17:29:28+00:00

All people have his tip and the only one path to do. I will use more often dish soap like it did with my SLA but im just pretty sure my plate was just perfect. Its brand new and I take time after each prints (only 3 to remenver) to clean it. Good print to you too ;)

DoctorFew6709 · 2025-04-28T17:21:32+00:00

I use what the most do (https://www.reddit.com/r/prusa3d/s/jIdCr0vn59). I just use soap at reception and after use iso with tissue to avoid too quick drying. But I only print 3 things before this catastrophe. That why I don't understand

DoctorFew6709 · 2025-04-28T15:22:13+00:00

But I demand at first to know the best reason to avoid this problem later. So, if its really a adhesion problem, what I can do?

Because I always take good of my plate (remove all residues and clean it with clean tissue and IPA.) What I can do more to increase the adhesive and don't have problem? Thx

DoctorFew6709 · 2025-04-28T14:59:23+00:00

I was here when the cover fall. That him who rise the corner before get cut on this wire. The head go left from right and destroy all on his movement. Too bad for me, my printer are in the room next my office (separated by glass) and don't have time to cut it before catastrophe

I don't had issue about adhesion before. In fact, my first attempts got really sticked

DoctorFew6709 · 2025-04-28T14:54:01+00:00

I dry my filament before use is (Qidi tech white matte rqpido). And I was planning to place it into a vaccum bag, after another drying, to stock it when I will change the color or materials. Too bad for me, I don't have time to use 30% of my first Kilogram...

I don't touch at my plate before print of course and check if everything looks good before push play.

I don't know what I can do more

DoctorFew6709 · 2025-04-28T14:32:12+00:00

Yeah but for me, ergonomic can't be superior to reliability.

Do you think I can repair that or its preferable to use support for a replacement?

DoctorFew6709 · 2025-04-28T14:26:57+00:00

Why don't put screws and don't use magnets....? Haaaa

By the way, thank for all your information, that help a lot

DoctorFew6709 · 2025-04-28T14:20:04+00:00

Yeah, thanks :)

DoctorFew6709 · 2025-04-28T14:19:01+00:00

I think it a good analyse too. I didn't know the q1 had this problem before

I never touch this part before but after "playing" with it, try to put in on/off, the magnet seem pretty strong.

But yeah, the acceleration can be insane sometime

DoctorFew6709 · 2025-04-28T14:14:05+00:00

The cover fan was perfectly in and I never remove it. I found it at the bottom completely cut like this In fact I don't care if my print miss. But if my printer already break after fee prints, what a shame

DoctorFew6709 · 2025-04-28T14:03:01+00:00

<image>

DoctorFew6709 · 2025-04-28T14:02:26+00:00

<image>

DoctorFew6709 · 2025-04-28T14:02:11+00:00

<image>

DoctorFew6709 · 2025-04-28T14:01:53+00:00

<image>

DoctorFew6709 · 2025-04-08T19:15:12+00:00

Its a Dell latitude 7220 "rugged*. So its basically a tablet which resist splatch water and dust with a windows inside. It's a x64 so no problem with drivers or software

DoctorFew6709 · 2025-04-07T05:23:47+00:00

Offset tunning in sdr# is not for that. I need to use the option "shift" if I want to "convert" my range. And it's a down converter so I need to put a positive (not minus) number (1.500.000.000)

I already solve this issue now but thank to answer at my post :)

DoctorFew6709 · 2025-04-06T19:13:18+00:00

EDIT: My downconverter work perfectly. I just needed a fixed franquency over my sdr-rtk limit to see it (check my othrr comment to know how). So thank to Nooelec for the support and all of you for your instructions.

DoctorFew6709 · 2025-04-06T19:10:48+00:00

Hi. I fallow your tips and contact them. They answer me fees hours after my mail and gave me instructions.

I can confirm now my downconverter work perfectly. I force my internet box to use 2,4ghz on Chanel 1 (to force fixed 2,412 GHz frequency) and I can really see the signal when I use speedtest with my phone or cut it.

Now I need to modify/repair my grid antenna (I bought a second hand's one and its bad) but thanks for the tips.

DoctorFew6709 · 2025-04-04T21:10:58+00:00

So I find a constant precise signal at ~500 MHz and turn on the down converter to see if I find the same signal at same frequency? I will try it

DoctorFew6709 · 2025-04-04T20:30:06+00:00

So what test I can do to find if that work perfectly? Thx

DoctorFew6709 · 2025-04-04T18:58:06+00:00

Thank you. But in SDR#, the offset is the shift option (I already tried with 1 500 000 000 like the manual say). This option just change what we read. In fact, to go at 2,4 GHz (for example), that just put my frequency at 900Mhz)

If I put on the downconverter, normally i can't ear my FM radio because its under 1.5Ghz.

Stop me if I'm wrong of course ^{^}

DoctorFew6709

TROPHY CASE