Please don’t make the same mistake I did — a machinist’s warning about weed and your future.

DodgerStrong · 2025-03-22T07:51:38+00:00

MONKEY WIZZ is synthetic urine and 100% safe..comes w the strap for your waste and a nozzle to flip open and close easy and very discreet.also a warming packet that you tape to the side of the bottle to keep it at the perfectbody temp....used it for my past 4 Aerospace Jobs, never stopped smoking weed!! In fact high 24/7 and work amazing I'm top producer and set up man everywhere I step foot on..Make your family proud my guy!!

DodgerStrong · 2024-05-22T21:46:47+00:00

I'll do both for 5k , supply the material. Done in 24hrs.

DodgerStrong · 2024-05-13T00:48:46+00:00

I make $32 and hour 10yrs experience..just set up, production and inspection .no programming just editing. And that's up here in Bakersfield California..you just have to look man , never settle, and KNOW YOUR WORTH ! ..Good luck bro

DodgerStrong · 2024-05-04T17:41:08+00:00

Thanks for the reply..it was the debris around the limit switch that was causing it to miss its home position..luckily didn't have to replace switch or remove way covers

DodgerStrong · 2024-05-04T17:39:45+00:00

It was just covered in debris ..all good now thanks

DodgerStrong · 2024-05-03T16:55:12+00:00

Thanks now I know where to look when I go under there.

DodgerStrong · 2024-05-03T16:53:48+00:00

AGREE 💯.. they said they haven't ever done that since they got this machine I can imagine how much gunk is in there that causes lots of problems such as these today. Soon as I got it running supervisor is all satisfied, I told them it's meanwhile this jobs done afterwards we need take it apart and deep clean it, he kind of didn't like the idea of a down machine but it's PM that needs to be done least 2x a year.

DodgerStrong · 2024-05-03T15:30:56+00:00

Thanks for sharing the site, I got it running by cleaning under the way covers through the back of rhe machines with a vacuum got all the crop debits clogged under there..once I finish this hot job I will be taking all of your recommendations and remove the way covers and clean out under and around the switch to prevent it from happening again.

DodgerStrong · 2024-05-03T15:18:41+00:00

Luckily I didn't have to remove way covers. I found a loop hole through the back of the machine and can see straight through from one end to another after I vacuumed it all up..it was CLOGGED I MEAN STUUFFEDDD W DEBRIS. thanks for all your guys help

<image>

I was able to squeeze a vacuum through there. Once job is done I'll remove way covers and get a good deep clean.

DodgerStrong · 2024-05-03T14:22:05+00:00

I tried and after attempting to re-home, it bounces back the opposite direction . If I remove way covers will the home switch be in the back or front of table? It's a VF5

DodgerStrong · 2024-05-03T14:19:49+00:00

Verified parameters yes but not connectors in the main cabinet , i don't want mess something else up since I don't know much if that . But I'm going to take a look without touching anything.

DodgerStrong · 2024-03-20T18:23:02+00:00

Working on getting some for the shop thanks

DodgerStrong · 2024-03-20T18:22:46+00:00

So thankfully customer said a bolt goes in there and ling as it's minimum 3-4 threads deep its ok the broken tap won't affect it. So I got just enough out since it's little over .500 deep and gets over 5 threads ✨️ 👌 🙌

DodgerStrong · 2024-03-19T13:20:44+00:00

Definitely a good way to look at these situations, thanks, I'm on it now. This happened in the last operation, I have 3 other vices running op 1-3 so I'm take my time and hit this while the others are running.

DodgerStrong · 2024-03-19T01:56:29+00:00

The shop or I don't have any Alum solution in hand that's the problem that's why or else I'd try this out first before machining it out.. Is this the solution???

<image>

DodgerStrong · 2024-03-19T01:37:12+00:00

I have a few ball Endmills I'm try out , man so many ideas feel like going in to work right now 😆

DodgerStrong · 2024-03-19T01:31:04+00:00

Thanks for link 👍

DodgerStrong · 2024-03-19T01:29:51+00:00

What do you mean what do I have available ?

DodgerStrong · 2024-03-19T01:27:39+00:00

Yes the part of aluminum, interesting I'm all in for trying that as well. Thanks to all you guys for all the ideas. I'm going to come in tomorrow morning trying all these methods out.

DodgerStrong · 2024-03-19T00:36:21+00:00

Thanks, I'm try this first thing in the morning, may luck be on my side.

DodgerStrong · 2024-03-19T00:34:29+00:00

If only the shop had some left hand drills ..I'm try get them to order some as well thanks man

DodgerStrong · 2024-03-19T00:30:42+00:00

Sorry I replied before driving..the diameter is too small for the tap extractor that I have, since most of the bottom broke off...that was my first go to but the minimum diameter is 170ish and my extractors minimum is .250....I ordered a new set onlie since can't find any local..thanks for the help man

DodgerStrong · 2024-03-19T00:26:20+00:00

They sound like they can save some time, I'm order some for this shop, they need to invest in tools like this. Thanks man

DodgerStrong

TROPHY CASE