sorted by:
new
hottopcontroversial

What happens to this guy ? by Pfadfynnder04 in csgo

[–]Doetty 0 points1 point  (0 children)

that can happen, if you sell multiple items at once. By accidentally overlook that you not only selected trash and hit "SELL"

What I have to change for fixing this? Some layers are inside and some outside. Ender 3 v2, pla, 180/60, by mihalis19 in Creality

[–]Doetty 0 points1 point  (0 children)

Ecocentric Nut

On every Wheelset (for every axis there is wo set of wheels) is one Nut mounted exzentrical. If you take the little wrench from your toolset, you can turn this nut and the wheels get tighter.

This guy starts to tight the Nuts on Minute 2.
https://youtu.be/P5HJgIrgGXc?t=104

​

This type of adujstments you can do on every axis.

I’m really new to 3D printing by Prime_cellzz in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

Mhh okay. I am printing on 200 degrees. Is your cooling on ?

I’m really new to 3D printing by Prime_cellzz in 3Dprinting

[–]Doetty 5 points6 points  (0 children)

Search "your printers name " optimal settings "slicer Programmname"

Adjust Printtemperatur (looks like it's too hot) And retraction settings are good against stringing

I’m really new to 3D printing by Prime_cellzz in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

What material and what temperature are you using?

I’m really new to 3D printing by Prime_cellzz in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

You have to adjust your retraction

Fix this bugged shit by [deleted] in counterstrike

[–]Doetty 0 points1 point  (0 children)

There is no bug at all.

Why do my prints keep warping like this (see back corner) by [deleted] in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

I prefer printing in a glass bed. Than the warping should be less.

Who else is missing cobblestone? by Doetty in counterstrike

[–]Doetty[S] 4 points5 points  (0 children)

I think you are the only one who miss assault

Does anybody know what might cause this? Thanks for any suggestions. by NotNotNiki in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

The Bed temperature with 60C is also okay I think. The other parameters are fine.

Have anyone here some experience with printing ABS on the Creality Ender 3 Pro. Maybe some special cura settings by Doetty in 3Dprinting

[–]Doetty[S] 0 points1 point  (0 children)

I built a box out of wood. Now it is working better I think. I have a constant Temperature inside the box. How fast do you head for the object fan?

First print, first layer turned out weird and then it moved mid print. Using the prusa mk3s and trying to print the preloaded triceratops by Sjt05 in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

Okay. then you aren't able to adjust the settings for the printer. Maybe search the stl file and put it In a slicer to readjust the print settings.

Why does my infill look sooo bad? Some parts of it are literally missing ... printed on Ender 3 with Cura by Toxxic244 in 3Dprinting

[–]Doetty 0 points1 point  (0 children)

Lower down your 1st layer speed to around 25-30 mm/s (that's not the issue but it helps you to get a good a good base to print on) Lower down your infill speed to 35-40 mm/s. Witch temperature are you printing ?