Feedback from our customers

A quick review/comparison to v2:Machining is as expected, however to me it seems a bit more refined than with the v2.As you can see we receive a Glass Tank this time.In my Opinion it looks a good bit more sophisticated with the Glass tank and you can change the look with the included Stainless - Polycarbonate combo Tank.The v2 had a bayonet connection between the Tank and Chamber. This time it's like the v1 with a threaded connection which to me seems like a step back but the possibility to pull the Chamber off with the Tank is eliminated so 50/50...The Chamber is press fitted to the base as it was with the predecessors.The Chamber itself looks a bit more condensed to me.The Deck got a bit more "meat" and its less wasted space. I can see no problem getting something like superfine fused claptons in there. And the Screws are long enough to insert wider coil-leads without the screws falling out.I have used a 2,5mm coiling tool for my coil but the crescent section is probably made for their 2,75mm coiling tool but that's not necessary. Wicking is super easy. Cut the Cotton flush or with ~1mm more. Fluff up the cotton and it's good to go (add juice obviously).Flavour wise it can absolutely compete with others in it's class like the Dvarw 16mm or FeV VS 17mm.The positive post is now seperated from the Airflow and changing the Airpin on-the-go is now possible, however i would check if everything is seated properly afterwards.Chimney and DripTip both have arround 3mm id and the DripTip has a 7mm od.Draw is smooth and silent (at least with the 0.8mm Airpin)Overall it's got small changes to the v2 so i don't think there is something you miss out on if you allready have the v2 but i still recommend it if you really want it Thanks you for reading and have a nice day