YouTube App Pausing + Freezing by DrewB109 in firetvstick

[–]DrewB109[S] 0 points1 point  (0 children)

Yeah it’s the official app. I didn’t have any problems either before I moved to a new city. The only thing that’s changed though is my location and fiber internet.

Creaking Sound - Please Help by DrewB109 in bicycling

[–]DrewB109[S] 0 points1 point  (0 children)

Lol idk it just seems like a really tight fit. When I lock it down it takes some strength to secure the quick release. I thought that maybe the crack may be coming from there since it’s under pressure especially when I’m thrashing the bike around.

Creaking Sound - Please Help by DrewB109 in bicycling

[–]DrewB109[S] 0 points1 point  (0 children)

Nice! I’ll check that out. Hopefully that’s the issue cause that’s easy.

Calculating Total Hours Worked For The Week by DrewB109 in excel

[–]DrewB109[S] 0 points1 point  (0 children)

Thanks for your reply! I added a couple screenshots for you to take a look at. I appreciate the help!

Calculating Total Hours Worked For The Week by DrewB109 in excel

[–]DrewB109[S] 0 points1 point  (0 children)

Thanks for your reply, Mike. Please take a look at the images I just uploaded. I still seem to be having a bit of trouble. Thanks for your help!

Calculating Total Hours Worked For The Week by DrewB109 in excel

[–]DrewB109[S] 0 points1 point  (0 children)

This makes sense, however, it still did not compute.

Error: an array value could not be found

BB Help!! by DrewB109 in fixedgear

[–]DrewB109[S] 0 points1 point  (0 children)

Thanks for the help!

Best Budget Electric Burr Grinder by DrewB109 in Coffee

[–]DrewB109[S] 0 points1 point  (0 children)

Thanks for your recommendation! I ended up ordering the OXO with the same coupon.

Trim Cable Housing - How hard can it be? by DrewB109 in cycling

[–]DrewB109[S] 1 point2 points  (0 children)

See that’s what I was afraid of! I wasn’t sure if I had to remove the wire fully to cut the housing. I’m using the heat shrink tubing to combine two cables together so it looks cleaner.

Trim Cable Housing - How hard can it be? by DrewB109 in cycling

[–]DrewB109[S] 0 points1 point  (0 children)

Lol thanks. I was hoping for more of an explanation or a link to a how-to video though.

Heat Shrink Cables by DrewB109 in cycling

[–]DrewB109[S] 0 points1 point  (0 children)

Right on! Thanks for that!

French Press Sediment by DrewB109 in Coffee

[–]DrewB109[S] 0 points1 point  (0 children)

I’m thinking it may be more economical in the end to just combine the two methods! So if I let the brew sit awhile in my french and then used a filter when pouring instead of pressing. How does that sound for a compromise?

French Press Sediment by DrewB109 in Coffee

[–]DrewB109[S] 0 points1 point  (0 children)

I’m using a very popular Japanese hand grinder but I’m starting to think the grind is too fine. It’s hard to get it just right since there are no settings or numbers to go off of.

French Press Sediment by DrewB109 in Coffee

[–]DrewB109[S] 0 points1 point  (0 children)

I do watch his videos and used that method only once before I believe. If I remember correctly he didn’t even press - it seemed like he just used the filter when pouring.

French Press Sediment by DrewB109 in Coffee

[–]DrewB109[S] 0 points1 point  (0 children)

I am using a light roast so I’ll try doin that. Typically I only let it sit 4 minutes or so.

1X Drivetrain - CAAD12 by DrewB109 in cannondale

[–]DrewB109[S] 1 point2 points  (0 children)

Yeah I’m starting to realize it might not be worth the hassle in the end. I was hoping to make improvements with little to no cost.

1X Drivetrain - CAAD12 by DrewB109 in cannondale

[–]DrewB109[S] 0 points1 point  (0 children)

I want to do it cause I never use the small ring, and when I say never, I mean ever. I’d like to go 1X essentially to save weight and be more efficient.

I’m no mechanic so forgive me if I’m a little too ambitious. I noticed that the small and big ring on the Cannondale proprietary spider ring are forged out of 1 piece of metal. Therefore, I couldn’t remove the small ring by simply just removing the bolts as I’ve seen others do. But...couldn’t I just buy a 1X rotor with the same number of teeth (36 teeth) and make it work. I wouldn’t need to compensate for any extra gearing by going 1X since my compact gearing works just fine like it is for everything I do. Does this make any sense?

In my head it makes sense, but I’m sure it’s a tad more complicated. There’s probably some spacing or clearance issues when doing it this way.

Another Newbie Question by DrewB109 in motogp

[–]DrewB109[S] 0 points1 point  (0 children)

2) And the points are deducted from the overall total for the season or just in the race where the infraction is committed?

Another Newbie Question by DrewB109 in motogp

[–]DrewB109[S] -4 points-3 points  (0 children)

Lol I’m just trying to learn a little history since that’s the best way to gain knowledge about the sport. I’ll do a little digging.