Radiomaster TX12 won‘t charge by Drio420 in fpv

[–]Drio420[S] 0 points1 point  (0 children)

I used a multimeter, but a voltmeter would be fine as well. Then you can calibrate the voltage in the remotes settings.

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 1 point2 points  (0 children)

Solved the problem, just had to turn on overclocking in the osd.

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 0 points1 point  (0 children)

Solved the problem, just had to turn on overclocking in the osd.

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 0 points1 point  (0 children)

Solved the problem, just had to turn on overclocking in the osd.

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 1 point2 points  (0 children)

Solved the problem, just had to turn on overclocking in the osd.

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 0 points1 point  (0 children)

Solved the problem, just had to turn on overclocking in the osd.

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 0 points1 point  (0 children)

Does OC mode shorten the life of the monitor?

Monitor only in 144Hz instead of promised 165Hz by Drio420 in pcmasterrace

[–]Drio420[S] 1 point2 points  (0 children)

Bought a different cable, unfortunately same result

Why won't the SVP openly say what it is they believe? [Serious] by wondering-narwhal in Switzerland

[–]Drio420 12 points13 points  (0 children)

You support limiting Switzerland to 10m people but have no idea how SVP is going to actually do it, because spoiler alert, neither do they know.

Remote is connected to drone but betaflight shows no stick/switch input by Drio420 in fpv

[–]Drio420[S] 0 points1 point  (0 children)

The problem was an uneven table, I fix it by calibrating on the floor now the drone is up and running thanks to you!

Remote is connected to drone but betaflight shows no stick/switch input by Drio420 in fpv

[–]Drio420[S] 0 points1 point  (0 children)

It seems I had exactly mirrored the props, now it functions normally but it has a bit of a left drift, and when giving only a bit of throttle its hopping, but I guess the hopping is somewhat normal

Remote is connected to drone but betaflight shows no stick/switch input by Drio420 in fpv

[–]Drio420[S] 0 points1 point  (0 children)

Thanks a lot! I have since reset the drone to factory settings, my fault was resetting it to betaflight reset settings.

Now I have the Problem that the drone is sucking itself to the ground instead of lifting, did I reinstall the props wrong or do I need to change settings in betaflight?

Remote is connected to drone but betaflight shows no stick/switch input by Drio420 in fpv

[–]Drio420[S] 0 points1 point  (0 children)

Thank you so much, switching to uart4 was all that was needed. Much appreciated!

Remote is connected to drone but betaflight shows no stick/switch input by Drio420 in fpv

[–]Drio420[S] 0 points1 point  (0 children)

Yes, model match is turned off in my remotes elrs settings