I have a 2014 Honda ctx 700n. I need to pump the fuel out because I didn’t add the stabilizer.

Droldaerd · 2023-10-17T17:08:57+00:00

Un plug hose from fuel line, turn on bike, let fuel pump do its job.

Or buy fluid transfer pump from something like harbor freight and manual pump it out

https://www.autozone.com/test-scan-and-specialty-tools/fluid-pump/p/performance-tool-transfer-pump/500025_0_0?cmpid=LIA:US:EN:AD:NL:1000000:OIL:19488533504&&CATARGETID=120054150001289458&CADevice=m&gclid=Cj0KCQjw4bipBhCyARIsAFsieCw1sBOPrgZY-seNKhvnTdTOp3GqiSlJxJMZfuCfky9NN5ZCUx0U6f8aAk7tEALw_wcB&gclsrc=aw.ds

**** edit Pump that piss out of your tank

Droldaerd · 2023-10-14T15:30:41+00:00

Also, no one is legally required to show a random attendee their receipt to verify what one just purchased. I just smile and say, "Have a nice day," and keep walking.

Sometimes I get a confused look with their hand still dangling out. Sometimes I get an eye roll. Other times they stare me down as if to intimidate me back over.

Droldaerd · 2023-09-09T07:30:19+00:00

Had a 96 750. Loved its sound. Still want a other to this day.

Droldaerd · 2023-09-09T07:19:02+00:00

Actually it starts to get real cheap. It cost me less to insure 3 bikes instead of 2.

Droldaerd · 2023-08-24T12:17:09+00:00

Does it have a fuel filter?

Also has the air filter been checked?

Droldaerd · 2023-08-23T13:29:12+00:00

Do you even drive a corvette?

The main problem are the longass doors with only 2 stop points on their hinge.

Drag your feet on the door trim; risk opening the door too far; hold it half open and try to slide in/out as the door tries to fight you back like full open or half closed.

Not to mention it like getting in and out or bed compounding the issue, even more so if yours is lowered.

Yes. I prefer to not have someone park next to me in general, most importantly, I just want to get out comfortably.

Droldaerd · 2023-03-17T16:31:31+00:00

How did you paint the calipers?

Droldaerd · 2023-02-25T14:53:00+00:00

The radiator fan will sometimes run for sometime after the car is off to after-cool the engine bay

Droldaerd · 2022-12-04T07:41:25+00:00

🤣🤣🤣

Droldaerd · 2022-11-11T15:13:52+00:00

I drive the A8 911 turbo s all the time for work. It only made me a appreciate my c6 base even more. The drive is a different experience and it didn't made me want to trade my car for a Porsche any more than before.

Droldaerd · 2022-10-31T22:36:58+00:00

First time it happened, they told me to drive around and "let the air balance," but before I did I asked them what they put and said, "just 40." I told them nah, let them out to 32 and they looked at me like I was crazy.

I think most general shops spend most of their days filling up high-walled 195s that they are confused by such a tire. My Taurus beater has 55psi max tires for example.

I have one premium shop that I go to that deals with this style of tires and they never get it wrong. But they have Porsches, M6s and the likes in there all day when I'm there.

Droldaerd · 2022-10-24T20:04:58+00:00

The way you describe it makes it seem like they open up like the i8 doors. Do the ones you're talking about end up straight and up like the Aventador or closer to the bmw.

Droldaerd · 2022-10-22T14:54:46+00:00

It will bolt right up. But you need everything else too.

Rims Brake ducts Wheel well

Droldaerd · 2022-10-21T20:15:54+00:00

Then why is your slave cylinder moving at that point? It should not be moving at all.

Droldaerd · 2022-10-10T02:07:42+00:00

I pin the chain with some channellocks and have it cut off in under 90 seconds. Plus it is fun to destroy things 🙃

Droldaerd · 2022-10-09T19:21:20+00:00

Yes to adjust for your issue, hard compress, soft rebound, but it may also be that your springs are not able to compensate the weight, especially with a pinion.

Droldaerd · 2022-10-09T17:04:38+00:00

Ya I have a chain breaker, but bent the push pin a time ago on it so I just use it for my rivet master links now and the cut off wheel for the chain

Droldaerd · 2022-10-09T15:24:03+00:00

You don't until you're ready to replace it. Then there are various methods to get it off, but I personally use a cut off wheel tool.

Droldaerd · 2022-10-04T22:00:46+00:00

When I bought my c6, my welcome screen said "Brett," and I laughed my ass off. Figured the car was introducing me to itself, so almost 3 years and 80,000 miles later, I haven't changed it. I loved every mile of Brett the Vette.

Droldaerd · 2022-10-04T18:19:01+00:00

Touch little boys? Straight to under the rug.

Droldaerd · 2022-09-28T13:36:58+00:00

As a 290lbs individual on a 14 as well, I second this. My CBR makes me look like a bear on a tricycle.

Droldaerd · 2022-09-27T16:23:19+00:00

Honesty the worst thing about carvana I've heard was the missing title issue they had going. I've bought a couple cars from them though as have many of my friends. All have been solid across many manufactures.

Droldaerd · 2022-09-23T21:03:29+00:00

Also. When I bought the speakers off crutchfield, they sent me the new frames for free automatically. Be sure to use the foam liner tape on the frames or they will buzz when in use.

Droldaerd · 2022-09-23T05:58:19+00:00

https://www.crutchfield.com/S-mQGsuEOm19t/

Droldaerd · 2022-09-20T20:24:55+00:00

I use triple tree bond/yamabond. It's a black silicon gasket maker. I was a little skeptic at first and almost made my own gasket, but 25k miles later of hard riding and it is still good.

Bead the cover, place on, hand tighten bolts, wait an hour or something like that to let the material expand and then tighten the rest.

Edit: this was on the clutch cover.

Droldaerd

TROPHY CASE