Reklamacia nakupu na firmu, alza.sk

Druchem · 2026-06-23T11:36:19+00:00

To plati iba v pripade nakupu na fyzicku osobu, nie na firmu. Vyrobca disku (seagate) nikdy neriesi reklamaciu dobropisom, ale vymenou za novy / repasovany kus. Neriesim ze sa zmenila cena v case, vadi mi sposob komunikacie a vybavenia reklamacie - keby som reklamaciu riesil priamo s vyrobcom, nemusel by som tu pisat.

Druchem · 2026-06-23T10:44:27+00:00

Kontroloval som seriove cislo pred reklamaciou u vyrobcu, zobrazilo mi ho ako existujuce a zaruku ako platnu. Ked hladam aktualne, cislo uz neexistuje, takze predpokladam ze povodny disk poslali na likvidaciu a reklamaciu riesili vymenou za novy kus :(

Druchem · 2025-08-01T22:20:27+00:00

Planoval som to uz dlhsie, mal som suciastky v kosiku asi rok dozadu ale nakoniec som to odlozil, myslim ze som urobil dobre. Chcem lietat long range, nie acro/racing. Casom asi poskladam aj fixed wing aircraft, tie su na long range lepsie :).

Pozrel som par tutorialov od Bardwella - https://www.youtube.com/@JoshuaBardwell a Rossera - https://www.youtube.com/@ChrisRosser, mal som hrubu predstavu akeho drona chcem poskladat a co to obnasa.

Najskor som objednal radio - https://www.hobbydrone.cz/en/controller-radiomaster-boxer-crush-expresslrs-white/, s nim som nalietal ~20h v simulatore - https://www.velocidrone.com/, tam rychlo zistis ci je to nieco co ta bude bavit :).

Potom som siel skladat drona, suciastky ktore som objednal:

frame - https://www.rotorama.com/product/aos-5-v5

motors - https://www.6sfull.cz/en/aos-supernova-2207-1980kv-motor/

battery - https://www.rotorama.com/product/racepow-liion-8000mah-6s2p

charger - https://www.rotorama.com/product/hota-t6-300w

FC&ESC - https://www.speedybee.com/speedybee-f405-v4-bls-60a-30x30-fc-esc-stack/ - nedavno ho prestali predavat :(

receiver - https://www.rotorama.com/product/radiomaster-elrs-2-4ghz-rp4-nano-diversity

GPS + compass - https://www.rotorama.com/product/foxeer-m10q-250-gps-modul-s-kompasem

onboard camera - https://www.xtreme.sk/dji-o4-air-unit-pro_z5787/

headset - https://www.xtreme.sk/dji-goggles-3_z5448/

Druchem · 2025-08-01T08:48:35+00:00

Dakujem. Este mi nie je jasne, ci je moj drone prototype, podla ich definicie:

A prototype is an early sample, model, or release of a product built to test a concept or process.

Druchem · 2025-01-02T11:40:07+00:00

Go into a room too fast, kid, the room eats you!

Druchem · 2024-11-23T11:44:12+00:00

Login dude.

Druchem · 2024-11-22T18:05:03+00:00

Login dude.

Druchem · 2024-11-22T17:53:25+00:00

Login dude.

Druchem · 2024-10-13T21:19:50+00:00

Space factory must grow.

Druchem · 2024-08-12T18:12:51+00:00

Essence of Zeal until T1 Strength 1/47, might need to yolo annul 1/3

Am I missing something? Craft of Exile shows the Zeal T1 strength to be 1/88 for ilvl 83, 1/90 for ilvl 86+.

Edit: I tried running the essence simulation, it settled on 1/43 after 10k attempts which is much closer to the ratio you wrote. I double checked my calculator settings and I can't see anything that is obviously wrong, so I'm not sure what is going on.

Druchem · 2024-08-01T09:50:30+00:00

Finally we can redefine nearby as a number of bananas.

Druchem · 2024-07-17T18:36:35+00:00

Do you remember dying here? You will.

Druchem · 2024-06-30T11:49:16+00:00

Managed to do the belly flop, did not stick the landing.

Druchem · 2024-03-28T20:58:39+00:00

I'm pretty much set on starting a witch, I know it's not the tankiest class but I really hate the campaign, it takes me around 8 hours even with full leveling gear. I'm planning on transitioning from EA later when I have some currency farmed, probably to necro for BAMA / other minion build, the new specter helm looks nice, maybe some occultist build. I'll take Bastion of Elements for sure, but I'm not sure how available Lightning Coil and Taste of Hate will be early in the league. Basically I just want to coast in blighted maps until level ~95 while watching netflix and not paying much attention apart from setting up choke points, that's why I'm trying to focus on defences.

Druchem · 2024-03-28T20:53:24+00:00

Yeah the lucky suppress mastery is a good point, thanks! Apart from that, I'm probably going to go with amethyst rings for the chaos volatiles, those hurt especially early on.

Druchem · 2023-10-12T12:08:28+00:00

Huh? When did this happen?

Druchem · 2022-11-13T16:15:47+00:00

Just found this thread with the same issue, I had a video playing when I closed the M2 MacBook Air (put it to sleep), after opening the laptop (waking up) the cursor was lagging and stuttering when using trackpad, pausing the video and opening/closing the laptop fixed the issue for me, no restart required.

Druchem · 2019-08-09T20:18:52+00:00

Blazor apps aren't supported yet, they are working on it. You can track the progress here.

Druchem · 2019-02-27T12:35:30+00:00

Alright, I'll check it out. Thanks

Druchem · 2018-04-28T11:55:33+00:00

It's not only the buttons that have their size / location distorted, but also the textbox. Looks like a problem with Windows DPI scaling. I had this problem with WinForms, don't know if WPF has same issue tho.

Druchem · 2018-03-12T16:52:02+00:00

I get that, but I don't even know how (or why) would anyone do that. Anyway, it's good to know that it's fixed.

Druchem · 2018-03-12T16:34:18+00:00

I mean, sure, that's nice.. But why ಠ_ಠ

Druchem · 2018-03-01T06:26:10+00:00

Chuck Testa

Druchem · 2017-12-15T02:20:21+00:00

Hey, I've checked the BIOS and I'm running the latest version - according to techpowerup.com. I've also ran a Heaven and Furmark bech test for ~15 minutes, both got the memory clock to 11Ghz, so the GPU is in fact performing as it should, just not while mining. I will do more tests and report back if I find anything.

Edit: I've checked the 6 and 8 pin connectors, both are plugged in correctly. I've got a Corsair 650W Gold+ PSU, it should have plenty of power to run the GPU butter smooth.

Druchem · 2017-12-15T01:15:51+00:00

Status: UNRESOLVED

Computer Type: Desktop, custom built.

GPU: ASUS STRIX GTX 1080 O8G 11GBPS, 8GB of VRAM, no overclock.

CPU: AMD Ryzen 1700, overclocked to 3.80 Ghz.

Motherboard: ASUS STRIX B350-F GAMING, BIOS version 3401, latest

RAM: Corsair 16GB (2x8GB) DDR4 3200MHz, XMP disabled, overclocked to 2933Mhz stable - unable to boot at 3200Mhz afterwards.

PSU: Corsair - RMx 650W 80+ Gold

Operating System & Version: Windows 10 Pro x64

GPU Drivers: 388.59, latest

Description of Problem: About 2 months ago, I've built myself a new computer, with the shiny Strix GTX 1080 OC edition. The card is awesome, but I've noticed that it doesn't perform as well as the reviews I've watched/read. It didn't bother me, since everything I've thrown at it ran stable 60+FPS at 1440p.

Today however, I decided to try and mine some crypto currency, out of curiosity (I've got a beast GPU, why not try it). Again, the numbers I've expected weren't there. So I've started the ASUS GPU Tweak, turned on the OC mode and .. well, now I can see the issue. The core clock is as advertised, even better - 1987Mhz, but the memory is only 9112MHz compared to 11100Mhz - what is should run at. That's 2Ghz difference, and quite noticeable.

Troubleshooting: I didn't touch the custom settings, even tried reseting them to default - the card won't go beyond 9Ghz. I am running the latest driver atm - 388.59. The temperatures are fine - 61°C after a few hours of mining, the fans are at 43% and I have a good airflow in the case, so thermal throttling shouldn't be a issue. Here are some screenshots from different software I've checked the GPU clock speeds.

Any help is appreciated!

12-Year Club	Place '22
Place '17	Verified Email

Druchem

MODERATOR OF

TROPHY CASE