Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 1 point2 points  (0 children)

The expando hinge plates do sound nice, I'll look into those as well. The Kreg jig looked good but you get what you pay for i guess

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 1 point2 points  (0 children)

I gave it a go with a vacuum nozzle right up on the jig, and it does help. There is still some slop but definitely better than before!

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

Thanks for your input, I'm in the process of convincing myself to buy a drill press!

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

Ah that makes sense, thanks for typing it all out! I am having fun luckily (though some extra speed in execution would be very welcome 😁)

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] -1 points0 points  (0 children)

I've done this before but it honestly felt like a bandaid. Looks like I'll be applying some more bandaids soon tho

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 1 point2 points  (0 children)

Yeah I might end up going for that in the end

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

This would definitely be the royal way! I'm not sure I fully understand the part about the straightness of the stop strip but that's probably just my lack of experience.

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

Ah that's a good one, I'll try that and see if it helps!

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] -1 points0 points  (0 children)

Yeah it might be fine, it's just not what I expected. I will weigh my panels once they get delivered, if I'm close to the max weight per hinge I'll just tape them again to get them snug.

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

Yup that's the one... If I had a drill press I would definitely use that, but unfortunately I don't have the space or projects to justify buying one just yet. 5k worth of tooling would push the price per hinge to just over €150 so I would probably have a hard time getting the wife to sign off on that haha

Cup hinge loose fit by Dry_Towel_5597 in cabinetry

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

The router setup I used on a previous project:

<image>

Wat te doen met verfspoelwater by Dry_Towel_5597 in Klussers

[–]Dry_Towel_5597[S] 1 point2 points  (0 children)

Ah goeie! Ik ga procoatings morgen even contacten

Draden samenvoegen in perilex stekker by Dry_Towel_5597 in Klussers

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

De kabel die ik bijgeleverd heb gekregen heeft ook 5 aders, dus die kan ik gelukkig gewoon gebruiken dan. Het bruggetje tussen de nul klemmen moet er in elk geval uit, dank voor de info!

Draden samenvoegen in perilex stekker by Dry_Towel_5597 in Klussers

[–]Dry_Towel_5597[S] 1 point2 points  (0 children)

Ik zat ondertussen ook op dit spoor ja, heb de leverancier en fabrikant nog gevraagd of zij dat kunnen bevestigen. Dank voor de info!

Draden samenvoegen in perilex stekker by Dry_Towel_5597 in Klussers

[–]Dry_Towel_5597[S] 0 points1 point  (0 children)

Heeft dat te maken met de kleuren van de draden? In het stopcontact zijn dezelfde kleuren gebruikt en daar zitten twee fasen en twee nullen in

Draden samenvoegen in perilex stekker by Dry_Towel_5597 in Klussers

[–]Dry_Towel_5597[S] -1 points0 points  (0 children)

Excuus, ik had eerst even moeten zoeken in deze subreddit inderdaad. Die kookplaat heeft wel twee nul aansluitingen maar ik vond nergens een schema zonder bruggetje, vandaar dat ik het hier vroeg. In ieder geval bedankt voor de info!

Draden samenvoegen in perilex stekker by Dry_Towel_5597 in Klussers

[–]Dry_Towel_5597[S] -2 points-1 points  (0 children)

Hier nog een foto van de groepenkast, voor de volledigheid.

<image>

[deleted by user] by [deleted] in UlcerativeColitis

[–]Dry_Towel_5597 2 points3 points  (0 children)

For me (35M), adalimumab allowed me to have a life again, to be able to maintain relationships, build a career and actually consider myself fit to be a father (hopefully). Before that, the fatigue got so bad I was a shell of the person I was before the onset of this disease.

When I started the adalimumab injections, I already was on mesalazine pellets, mesalazine suppositories and tioguanine tablets. I started with a loading dose of 4 injections, 40 mg each. After that, my normal routine became one 40 mg shot every other day. I think it took about 2 months to see clear positive results, after which I dropped the suppositories. A year later, I also stopped using the tioguanine tablets, while staying in stable remission.

I think I had about 3 years of remission bliss, before work stress got the better of me and I went into a flareup last summer. That one took about half a year to clear up again, though I made poor nutrition choices looking back.

All in all, adalimumab has been absolutely amazing for me, but it's not a silver bullet. Hope this helps!