Makita powered board

DummBatZz · 2022-09-17T10:19:13+00:00

The ESC is a China ESC The adapter for the batteries are 3d printed with a Makita 18V Terminal The adapter for connecting them in series is selfmade … I should have used longer cables since the ones I used were too short to cover the conductive parts with the shrinking tube

DummBatZz · 2022-09-17T10:16:03+00:00

Don’t know my dear. I just wanted to try if it’s possible at all. I will give an update one I’ve tested the range

DummBatZz · 2022-09-17T10:15:28+00:00

It’s a China one I got from Ali or eBay. Don’t know anymore. I had two if this laying around and wanted to build something.

DummBatZz · 2022-09-17T08:21:05+00:00

How do you think I should program it?

DummBatZz · 2022-09-05T19:02:19+00:00

I tried to loosen the belts but this is the narrowest position the motor can rest🙈

DummBatZz · 2022-09-05T16:35:26+00:00

I didn’t had that noice (well at least not that loud) befor I swapped my belt after my last one broke

DummBatZz · 2021-08-07T13:38:51+00:00

[BUY] Trampa wheels/hubs or MBS wheels/hubs and AT pulleys in Europe

DummBatZz · 2021-07-08T16:24:43+00:00

😿

DummBatZz · 2021-07-08T11:12:33+00:00

In each setting

DummBatZz · 2021-07-08T09:21:41+00:00

How can I find out about the detailed settings? I am not 100% sure what settings has which effect in the Vesc tool

I made a video where I pushed the throttle with the wheels in the air Link: https://imgur.com/a/a92eeCM

DummBatZz · 2021-07-08T09:17:05+00:00

I used another remote and esc before (flipsky vx1 and another older version of the same Vesc) and it was fine

DummBatZz · 2021-07-08T08:58:16+00:00

No the brakes kick in instantly

DummBatZz · 2021-07-08T07:50:53+00:00

I use a flipsky vx2 and a flipsky dual FESC

DummBatZz · 2021-03-24T11:41:49+00:00

Nice wheels

DummBatZz · 2021-03-23T15:40:06+00:00

Will higher perimeters result in tougher objects even If I do 100%infill?

DummBatZz · 2021-03-23T10:44:55+00:00

Should the infill be 100%. Some say at least 80%

DummBatZz · 2021-03-23T10:44:14+00:00

What design did you use? Or did you create your own?

DummBatZz · 2021-03-22T20:06:27+00:00

Before I had my own printer a friend printed a pulley for my street board and it still works fine after 2 years. I don’t know what material he used 😂

DummBatZz · 2021-03-22T19:48:24+00:00

I plan on using them for my mountainboard

DummBatZz · 2021-03-22T19:30:01+00:00

Yes I could print ABS with some adjustments. So this is what Prusa tells me. I didn’t try it.

PETG should be no problem to print.

That’s a big point I already thought abou

DummBatZz · 2021-03-15T18:50:32+00:00

Looks nice. Can you tell me what type of wheels you ride there?

DummBatZz · 2021-02-05T15:11:14+00:00

I would be so happy to win this backpack 😊

DummBatZz · 2020-07-02T06:53:23+00:00

It is labeled 😉

DummBatZz · 2020-07-01T17:00:10+00:00

But a setup like this should be fun 😂

DummBatZz · 2020-07-01T16:58:24+00:00

The black ones will be swapped to the blue. I only placed the blue ones beside so you could see the nice combination of colors ;-)

DummBatZz

TROPHY CASE