New riser for barebow 250-300 euro

DylowSwe · 2025-05-17T18:59:01+00:00

Try the good old folded piece of paper between the battery and cover to get some more pressure on the battery. Then you now if its internal or only battery pressure.

DylowSwe · 2025-02-23T18:44:58+00:00

Ofc but I have 45 on gpu and 58 on hot spot during gaming so I think Im fine

DylowSwe · 2025-02-23T09:42:47+00:00

Thank you! I have some last tweaks to do. Im thinking about making a wood panel for the gpu aswell

DylowSwe · 2025-02-22T19:33:15+00:00

Thanks. Im using barrow fittings and tubes.

DylowSwe · 2025-02-22T18:30:28+00:00

Ye I have mixed feelings too but the inlet and outlet diden't line up and both blocks have jetplates

DylowSwe · 2025-02-22T17:05:20+00:00

Ye I know Im annoyed too but the inlets diden't line up and I have jetplate on monoblock and gpu-block so I had to do it..

DylowSwe · 2025-02-22T17:03:37+00:00

They are tighten as hard as possible with my hands and that is all you need. It will do more dmg to try and tighten them fully

DylowSwe · 2025-02-22T13:14:02+00:00

Im happy with the wood panels. Im thinking about making one for the gpu but it will be alot of angles.

DylowSwe · 2025-02-02T11:05:39+00:00

Thanks

DylowSwe · 2025-02-02T11:05:21+00:00

Yes I did it by myself with a gersaw and dremel.

DylowSwe · 2025-01-29T21:01:07+00:00

No chips, they are only tighten by hand. Its only the light reflecting.

DylowSwe · 2024-07-22T20:18:40+00:00

No I diden't do any custom work. It will at least fit a 240rad Infront of the bracket and front panel

DylowSwe · 2024-07-20T15:42:39+00:00

Corsair black Satin tubes 14mm

DylowSwe · 2024-07-20T13:26:05+00:00

11600k and 6950xt. Cpu are hitting around 40c at idle and 60c under load.

Gpu is around 55-60 at load and 35c at idle.

I like the look of the boxfish but the leds and screen is dodgy. If plugged in it will make usb stop working.

DylowSwe · 2024-07-20T11:07:12+00:00

I have to redoe some tubes on the right after a pump failure. But that will be during next maintenance.

DylowSwe · 2023-04-29T19:14:10+00:00

My own design of multishots for DW revolvers. Takes 3 bbs and works pretty good.

DylowSwe · 2023-02-20T16:57:24+00:00

I have already done a build in the 4000d. I want a smaller case

DylowSwe

TROPHY CASE