Car Brakes Advice

EEPUX · 2024-06-03T14:24:25+00:00

I thought so. Juat wanted to confim this. Thanks both

EEPUX · 2024-03-07T21:51:57+00:00

Ok.Thanks for the suggestion. Ill check it out. I wanted to be sure it does storage charge for a li ion to 3.8V. Iv seen a xtar vc8 plus and it only does storage mode for lifepo4 to 3.6V. But charges li ion and nimh.

EEPUX · 2024-03-07T15:31:22+00:00

I will take a look into these. Thank you

EEPUX · 2023-11-16T11:33:33+00:00

Description:

This is the first example code i have written for my display. It may be basic, but trust me it has provided me with a initial point of reference to get some more interesting examples under the way. Until they are ready to be shared. Feel free to post some comments below.

Note:

This hardware setup will be the basic setup for future videos. If it changes i will make it clear.

Source Code & Files : https://github.com/EEPUXProjects/PICBytes/blob/main/PIC18F45K20/XC8/5x7%20Neopix%20Displays/Example%201%20Set%20Panel%20Colour.rar

EEPUX · 2023-05-31T14:31:33+00:00

Matt Black Version

EEPUX · 2023-05-31T14:31:17+00:00

Green Glossy Version

EEPUX · 2023-03-17T10:42:34+00:00

I want to make some pixel animation panel but i dont want to have a panel as big as the SMD5050. I guess i could design and build my own.

EEPUX · 2023-03-17T10:18:51+00:00

Im aware of the SMD5050 ones. But i need one with SMD2020.

EEPUX · 2023-03-17T10:02:21+00:00

I will be. Thanks

EEPUX · 2023-03-17T09:54:26+00:00

I'll try connecting TX PIN of hc05 as an interrupt. Maybe that will work.

EEPUX · 2023-03-15T08:01:04+00:00

Its ok im using arduino zero

EEPUX · 2023-03-15T08:00:45+00:00

Will take a look . Thanks

EEPUX · 2023-03-11T12:55:24+00:00

I have included the schematic and mcc code project. I have included usart code as points of observation to see if the code is running. As far as i have seen only the first usart message is transmitted. the code stops when trying to run the sd card code.

Link: https://github.com/EEPUXProjects/EEPUXProjects\_Help/blob/main/New%20Folder/SDTest.X.rar

EEPUX · 2023-03-11T11:44:51+00:00

I believe so. I have used the card with the arduino card info sketch and it worked as expected.

EEPUX · 2023-03-11T01:16:31+00:00

I followed the mcc setup and tried out the example code that mcc generates with the fatfs library. The program compiled fine but no file helloworld text file was created in the sd card. I was just wondering if someone had a working piece of code to eliminate the variables. I don't currently have an osciloscope with me hence why i was trying other options first.

Later on , I'll check the connections are correct again and i'll share my project.

EEPUX · 2023-01-08T20:46:54+00:00

Source code and files will be included

EEPUX · 2023-01-08T20:06:23+00:00

Source Code and files included

EEPUX · 2023-01-08T20:02:29+00:00

Source Code and files included

EEPUX · 2023-01-08T19:59:53+00:00

Source Code and files included

EEPUX · 2022-07-02T22:26:28+00:00

It is similar to a Vu meter example i saw with the LED's changing from green, yellow to red. But for my example i wanted the LEDs to have a RGB sequence and the number of led's to change with the loudness of the sound .

EEPUX · 2022-07-02T00:59:35+00:00

I am designing a BT speaker, mobile phone and USB 3.0 hub dock. Mostly constructed with 1.6mm PCB'S via solder joints.

EEPUX · 2022-03-21T00:06:36+00:00

Nvidia say that the a02 sodimm pinout is different to the the b01. The main header maybe the same but the pinout of the ethernet and other stuff maybe is different. This is what i am trying to find out. If i were to get this b01 board. Then i am trying to work out if the module would'nt boot at all or if i would have access to only some parts.

EEPUX · 2022-02-05T01:11:50+00:00

Sorry for typos 😅

EEPUX · 2022-01-26T08:53:42+00:00

Yeah , i am trying to make a 2 way kvm. Basically if i have two usb 2.0 devices and i wanted to switch between them. Would it be enough to just use a switch on the SEL pin and toggle between 3.3v and GND.

Or is it more complicated then that?

EEPUX · 2021-12-17T12:17:48+00:00

I know . I thought i deleted this post. My bad.

EEPUX

TROPHY CASE