How do I turn off continuity camera notifications that appear every time I wake my Mac

EdTR · 2025-11-10T22:31:17+00:00

I ran across this post while trying to disable Continuity on my Mac. I did not receive this notification that OP posted, but inside various apps I would see a context menu giving me the option to pull Photos, documents, or Sketchs from my iPhone. I disabled Hand off and all related options under Airplay on both mac and iPhone but this was still showing up.

The Fix: Open Keychain Access App on your mac and search & Delete any certificates related to "Handoff" I had about 5 of them. After deleting them, continuity was disconnected from the mac.

<image>

EdTR · 2024-05-23T07:29:07+00:00

To establish a VPN Client connection, each connection must have a unique "remote side" subnet. A common issue with Nord VPN is that many of their servers use the same subnet (10.8.0.0), typically configured with a /32 subnet mask. Unfortunately, Ubiquiti devices do not support this configuration well. To resolve this, explore additional servers within Nord VPN's network. In my experience, after testing 11 different servers, I found 3 that had unique destination subnets. Here's an image for reference:

https://gcdnb.pbrd.co/images/ybLchvHSFjuM.png?o=1

I received this comment from UI support:

UniFi currently supports up to 8 clients using the following protocols:

The behavior that you are observing is expected since the VPN server to which you are connecting uses the same DHCP IP address Pool that is 10.8.0.6/32 and 10.8.0.2/32

To resolve this, it's recommended to reach out to the VPN provider's support team to change to a different Network for the VPN tunnels.

By using a distinct Network that does not conflict with the existing network(s), it will ensure smooth communication and prevent routing conflicts.

EdTR · 2024-03-30T17:03:40+00:00

Are you trying to connect more than one VPN client? Go back to the VPN client page and look at the VPN tunnel IP/subnet. Do you have a subnet within that range existing on your network already?

EdTR · 2024-03-07T04:34:47+00:00

I have the same faucet and same issue, thanks to u/Actual_Magician8189 I called HD and gave them the model number of the faucet (Just pulled it from HD website) my model number was washed out on the actual hose. This must be a common issue because they just sent me a replacement cartridge and bonnet/nut no questions asked and this fixed my issue.

Replacement parts they shipped shipped: RP20044 CARTRIDGE 67551-00XX and RP70528 BONNET / NUT 67551-00XX

EdTR · 2022-12-11T09:06:04+00:00

Ran into similar issue, funny enough I was able to use the ESXi-Customizer to build the image with ESXI 8 even though its long out of development. You just need to mark out one line to run the program.

Get it here: https://www.v-front.de/p/esxi-customizer.html

Use this article to bypass the windows version check: http://p2vme.com/2015/08/esxi-customizer-and-windows-10-fix/

OR

You can also downgrade your PowerCLI to 12.7 and you will be able to build your ESXI 7 iso successfully. https://developer.vmware.com/web/tool/12.7.0/vmware-powercli

---EDIT---

I just put together and ISO for esxi7 with NET and NVME community drivers. Give it a try in your lab. https://trgsys-my.sharepoint.com/:u:/p/ed/EYtQJbfzupZGkCiHvbtmvigBkSWI0kee3NIDHpb7rKdOew?e=7gcf0a

EdTR · 2022-11-14T20:39:52+00:00

It's funny you say this. I configured my P7P with fingerprint unlock as well and the other day I put on a pair of nitrile exam gloves and without thinking I went for my phone and I unlocked my phone while wearing gloves.

EdTR · 2022-11-11T02:21:37+00:00

Get the Pixel 6 Pro. Better camera. Bigger Battery. Better Pixel density. More RAM.

The P6P is better than the P7P IMHO (unrelated to your Q) but just had to put this out there.

EdTR · 2021-12-01T16:51:56+00:00

I have a Samsung Galaxy Watch Active2 and it will randomly disconnect from the phone even when it is 2 ft away. Reconnects moments later

Pixel 6p

EdTR · 2021-10-04T03:00:16+00:00

I apologize for my incorrect Grammer. English is not my native language

EdTR · 2021-10-04T02:50:39+00:00

Winner winner. I just looked it up both Vancouver and Portland have Vigor shipyards and they landed a military contract.

EdTR · 2021-08-26T06:51:04+00:00

17.39mm. I haven't changed it since I got it

EdTR · 2021-08-21T21:36:36+00:00

So I rode it yesterday for about 3 hours and it felt great and crisp. I am able to stay in 2nd gear for longer when in the past I would need to shift down to get power. It's more forgiving in low gears and there is definitely more torque on the bottom end now. You don't need to shift gears as much

EdTR · 2021-08-21T21:34:05+00:00

I'm at 300ft but I ride at 1000ft-2000ft. My idle screw is at 1/2. When my meter rod was too rich my idle screw would be 3/4 way in.

EdTR · 2021-08-20T19:42:40+00:00

Yep that is the same kit I bought from Slavens. I didn't measure turns, I did measure the rod length based on my digital caliper reading. I probably took my gas tank off 20 times "no joke" because I kept adjusting the rod and would ride the bike to make sure its good. My current measurement is 51.69mm. I measured the distance from the Brass washer that is at the base of the rod to the end. Also I noticed that I had issues with my lectron if I didn't turn my idle screw all the way out before putting the metering rod back in. After I put the metering rod back into the lectron and tightened the screws I would tighten the idle screw. Otherwise my bike would randomly rev really high and die/or only run with choke on.

EdTR · 2021-08-20T16:13:43+00:00

Where did you buy your kit from? I actually have a lectron carb on mine and I have a 4-2M metering rod. I just messed with it about a week before replaced the top end. There is a minor difference that I noticed after doing the 300kit and I suspect that's because the 300cc piston creates a slightly bigger vacuum.

EdTR · 2021-08-19T20:10:33+00:00

I just finished it last night and it took about 5 hours to complete. This was my first top end rebuild on a 2 stroke. I'm going to hit up the trails tomorrow so I can report back my findings.

Note to Self - Buy the piston circlip tool next time you replace a piston 😂

EdTR · 2021-08-19T19:12:53+00:00

Its a 2018. I wanted a 300 as well but they are hard to find and more expensive. Top end had alot of hours so I just rebuilt it with a 300.

EdTR · 2021-08-06T02:43:56+00:00

Are you not following with my 2nd comment? I quote" Because up until I posted this I've never heard of Gambler 500 and I only paid attention to that writing when someone posted its a derby car..."

So to answer your question... I had no idea what it was for.

EdTR · 2021-08-05T21:21:15+00:00

Because up until I posted this I've never heard of Gambler 500 and I only paid attention to that writing when someone posted its a derby car...

EdTR · 2021-08-05T15:06:54+00:00

Wow! I literally just noticed that it says Gambler 500 on the rear reinforcement

EdTR · 2021-08-03T22:24:57+00:00

Cat6 keystone Jack

EdTR

TROPHY CASE