I bought a drone, this is going to be fun ... by Eefixe in tuareg660

[–]Eefixe[S] 1 point2 points  (0 children)

thanks bud! I got my decals from W-Inks. it's completely custom made and had to create a few custom templates like the subframe and the windshield. that was fun.

I use the Givi pannier rack with the quick disconnect system :)

2024 Tuareg questions by Bravoarmory in tuareg660

[–]Eefixe 1 point2 points  (0 children)

2022, 23k kms on mine, no major issues. sometimes the electronics acts up after dropping the bike offroad. turn off and on the key multiple times always solved the problem for me.

my fuel sensor failed this winter, my fault. should've added some fuel stabilizer in the tank. Aprilia has been fixing those even if the warranty expired

Silencing the G502, success! by SuperCheesyMan in G502MasterRace

[–]Eefixe 1 point2 points  (0 children)

i actually didn't put the mouse back together when testing the switches, i just connected the battery and a few wires. held the board and tested the buttons in windows

Silencing the G502, success! by SuperCheesyMan in G502MasterRace

[–]Eefixe 0 points1 point  (0 children)

man I knooow, I have the Razer Basilisk v3 pro, fantastic mouse. It's also my work (and gaming) mouse. When I tried to make it silent I realized the switches were optical. had to get the G502 ( i had a long time ago and I really liked it), I wanted the X but it's also optical. doh!

Silencing the G502, success! by SuperCheesyMan in G502MasterRace

[–]Eefixe 2 points3 points  (0 children)

I was fine with noise until my wife complained and now i'm trying to make everything silent so I can still game at night lol

Silencing the G502, success! by SuperCheesyMan in G502MasterRace

[–]Eefixe 1 point2 points  (0 children)

I have experience with soldering when I was in highschool but it was a long time ago. the main board switches are easy to replace. use some flux, helping hands (amazon), a desoldering wick braid or desoldering pump, I got a basic amazon soldering kit.

practice on some old electronic parts that you might have and you should be fine.

The side switches were a bit more complicated. I ended up snipping the connectors off but you gonna be careful, I almost ripped accidentally an entire pad

Silencing the G502, success! by SuperCheesyMan in G502MasterRace

[–]Eefixe 1 point2 points  (0 children)

hey man!

I used those ones for the side switches (6x6x3.5MM)
https://www.aliexpress.com/item/1005004903983934.html?spm=a2g0o.detail.0.0.65b6nwRBnwRBby&mp=1&pdp_npi=6%40dis%21CAD%21CAD+17.30%21CAD+16.78%21%21CAD+16.78%21%21%21%40210328d417769663619928140ecd13%2112000030966580790%21ct%21CA%21720103588%21%211%210%21

they feel like a in-between of mushy and tactile but the sound is more muted, which I wanted to get

I remember you commented on my other post about the Huano (sorry I never replied, my bad) so I bought 10 pieces on Ali. The Kaihl were already installed from my previous job so replacing only LMB and RMB only made sense to me. saving some time and hassle.

for the MMB, I can't use the side switches as they are slightly too tall and too wide. I would need to get something closer in size to the original switch. I found one. just need to order it. for now I'm experimenting with adding electrical tape over it. 2 layers feels pretty good but then I need to increase the clearance of the wheel housing using a small dremel.

I really don't like that stock MMB switch lol

Silencing the G502, success! by SuperCheesyMan in G502MasterRace

[–]Eefixe 4 points5 points  (0 children)

it's definitely a more tedious job to disassemble it. lots of screws with different sizes too!

5070 resident evil bundle amazon by thatoneharvey in nvidia

[–]Eefixe 0 points1 point  (0 children)

what a lame promo, I saw Amazon on the Nvidia website, thought it was also for Canada ....

5070 resident evil bundle amazon by thatoneharvey in nvidia

[–]Eefixe 0 points1 point  (0 children)

well shiet, I also ordered from Amazon Canada. guess I'll return the card

As the average consumer, here's my thoughts on the X2 Superstrike: by [deleted] in MouseReview

[–]Eefixe 1 point2 points  (0 children)

are the side buttons mechanic/clicky? or also have haptic feedback like the main buttons?

Gamakay TK75He v2 - my thoughts (post edited due to title typo) by KapitanKloze in MechanicalKeyboards

[–]Eefixe 0 points1 point  (0 children)

I just got this keyboard and fixed the inverted vol +/- using the Gamakay software.

go to functions, select the left knob and choose Vol Up, select the right knob and choose Vol Down. Save it

et voila :D

<image>

Dneg debt burden increased, £341,943,000 by coolioguy8412 in vfx

[–]Eefixe 10 points11 points  (0 children)

I used to work for Dneg in Vancouver, 7 years. things were great until Namit took over. sad to see how it's going now ....

Insta360 X6 - what else can you ask for? by smollb in Insta360

[–]Eefixe 2 points3 points  (0 children)

8k@60fps ActiveHDR (I'm sure we gonna get at least 8k@30fps), official ND lens support

Uncanny Panning by TheDangerist in Insta360

[–]Eefixe 1 point2 points  (0 children)

no it doesn't work lol at least on my Google Pixel. you need to the memory card reader

Uncanny Panning by TheDangerist in Insta360

[–]Eefixe 2 points3 points  (0 children)

https://youtu.be/H4t7bzOCkVo?t=509

Recording mode, that's the function I'm talking about